Very High Quality Milling Machine, 100% Made in Taiwan. Built For Those Users Who Are Looking For Higher Quality In A Dovetail Type Mill Configuration. Very Large Y and Z Travels Compared With Other Models In This Class, over 11 Of Y axis Travel. One Shot Lube System Standard. Very High Grade Castings Used Throughout Machine. Power Requirement is 220V SINGLE PHASE. Industrial users looking for a top quality, bench type milling machine, built for industrial. Use, with a smaller size compared with a full sized mill, to save space. High end gunsmiths looking for a smaller bench type milling machine, who wish to maintain the. Quality and features of a Taiwan made machine, but also want to save on space. Users who appreciate a high end, bench type milling machine with the space saving. Any other users who can appreciate a top quality machine with full features and no shortcuts. In a smaller space-saving size, at a very reasonable price for the level of quality that you are. Main High Quality Features. Head Swivels 90 degrees Left and Right for angled milling / drilling operations. Hand Scraped way Surfaces for better oil retention and fit, while leads to ultra smooth table. Movements, and very accurate movements. One Shot Lubrication system is standard equipment, which also extends machine life, and. Reduces oiling times of all way surfaces and lead screws to seconds, it is accomplished by. Simply pumping a lever. High precision Inch Pitch lead screws, for ease of use and greater accuracy (10 TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced gears in head for smooth and quiet operation, Hardened and Precision Ground for long. Life, and extremely quiet running for a geared head machine. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. The Quill is Precision Ground, for higher accuracy. No belts to change, simply stop and move levers for speed changes, quick and easy. Tolerance Test check, each machine is checked for accuracy through a careful inspection. That exceeds their expectations. Table T Slot Size: 5/8. X Axis Travel: 23-3/8 Max. Y Axis Travel: 11 Max. Z Axis Travel (Head): 17-1/2 Max. Distance, Spindle to Table: 20-1/2 Max. Leadscrew Type: Precision Ground ACME Leadscrew W/ Backlash Adjustments on. X and Y Axis. 100 (10 Threads Per Inch). Spindle Speed Range: 60-1500, 6 steps. Speed Change Type: Shift Lever. Spindle Bearing Type: High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class: C5. Main Motor HP: 2 HP. Overall Height, to reach Maximum top of Z Axis Travel: 88. Height with head at normal working height: 75. Height of Table Working Surface, mounted on optional stand 39-1/2. Front to back, rear of machine to front of Y Axis Handle 34-5/8. Chip Tray Size (At top of base) 30 x 24-1/2. Width X Axis Table Handles, Tip to Tip 41-3/4. Machine Weight 954 LBS (Without Stand) 1059 (With Stand). Main Motor Power: 2HP. Voltage / Phase: 220 Volt Single Phase Power. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-833T ULTRA PRECISION MILLING MACHINE WITH STAND MADE IN TAIWAN FREE SHIPPING” is in sale since Thursday, December 20, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• MPN: PM-833T 7 PM-833T STAND
• Brand: Precision Matthews
• Country//Region of Manufacture: Taiwan
• Country/Region of Manufacture: Taiwan

This Listing is for a. This is a very high precision milling machine, made in Taiwan. There are no shortcuts taken with these machines, they are absolutely top of the line! Standard Equipment Included with Mill. Here are some features of this milling machine. Main High Quality Features. Industrial users looking for a top quality, bench type milling machine, built for industrial use. With a smaller size compared with a full sized mill, to save space. High end gunsmiths looking for a smaller bench type milling machine, who wish to maintain. The quality and features of a Taiwan made machine, but also want to save on space. Users who appreciate a high end, bench type milling machine with the space saving. Any other users who can appreciate a top quality machine with full features and no shortcuts, in. A smaller space-saving size, at a very reasonable price for the level of quality that you are purchasing. Head Swivels 90 degrees Left and Right for angled milling / drilling operations. Hand Scraped way Surfaces for better oil retention and fit, while leads to ultra smooth table. Movements, and very accurate movements. One Shot Lubrication system is standard equipment, which also extends machine life, and. Reduces oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping a lever. High precision Inch Pitch lead screws, for ease of use and greater accuracy (10 TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced gears in head for smooth and quiet operation, Hardened and Precision Ground for. Long life, and extremely quiet running for a geared head machine. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. The Quill is Precision Ground, for higher accuracy. No belts to change, simply stop and move levers for speed changes, quick and easy. Tolerance Test check, each machine is checked for accuracy through a careful inspection. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. X Axis Travel 23-3/8. Y Axis Travel 11 (Compare with others of this size). Z Axis Travel (Head) 17-1/2. Distance, Spindle to Table 20-1/2. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash Adjustments on X and Y Axis. 100 (10 Threads Per Inch). Spindle Speed Range 60-1500 RPM (6 steps). Speed Change Type: Shift Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C5. Main Motor HP / Power 2 HP 1 PH. Overall Height, Head Up 88. Depth Front to back, rear of machine to front of knee casting 39-1/2. Rear of machine to tip of Y axis handle 34-5/8. Width X Axis Table Handles, Tip to Tip 41-3/4. Net Weight 1054 LBS. Voltage / Phase 220 Volt 1 Phase. Complete Base / Chip Tray with Storage Compartment. X Axis Power Feed. Z Axis Power Feed. One Shot Lubrication System. Fine Down Feed on Quill. Operator’s Manual and Parts List. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-833T 8×33 VERTICAL MILLING MACHINE, 5 YEAR WARRANTY FREE SHIPPING TAIWAN” is in sale since Monday, November 07, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-833T
• Country/Region of Manufacture: Taiwan

This Listing is for a. This is a very high precision milling machine, made in Taiwan. There are no shortcuts taken with these machines, they are absolutely top of the line! Standard Equipment Included with Mill. Here are some features of this milling machine. Main High Quality Features. Industrial users looking for a top quality, bench type milling machine, built for industrial use. With a smaller size compared with a full sized mill, to save space. High end gunsmiths looking for a smaller bench type milling machine, who wish to maintain. The quality and features of a Taiwan made machine, but also want to save on space. Users who appreciate a high end, bench type milling machine with the space saving. Any other users who can appreciate a top quality machine with full features and no shortcuts, in. A smaller space-saving size, at a very reasonable price for the level of quality that you are purchasing. Head Swivels 90 degrees Left and Right for angled milling / drilling operations. Hand Scraped way Surfaces for better oil retention and fit, while leads to ultra smooth table. Movements, and very accurate movements. One Shot Lubrication system is standard equipment, which also extends machine life, and. Reduces oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping a lever. High precision Inch Pitch lead screws, for ease of use and greater accuracy (10 TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced gears in head for smooth and quiet operation, Hardened and Precision Ground for. Long life, and extremely quiet running for a geared head machine. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. The Quill is Precision Ground, for higher accuracy. No belts to change, simply stop and move levers for speed changes, quick and easy. Tolerance Test check, each machine is checked for accuracy through a careful inspection. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. X Axis Travel 23-3/8. Y Axis Travel 11 (Compare with others of this size). Z Axis Travel (Head) 17-1/2. Distance, Spindle to Table 20-1/2. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash Adjustments on X and Y Axis. 100 (10 Threads Per Inch). Spindle Speed Range 60-1500 RPM (6 steps). Speed Change Type: Shift Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C5. Main Motor HP / Power 2 HP 1 PH. Overall Height, Head Up 88. Depth Front to back, rear of machine to front of knee casting 39-1/2. Rear of machine to tip of Y axis handle 34-5/8. Width X Axis Table Handles, Tip to Tip 41-3/4. Net Weight 1054 LBS. Voltage / Phase 220 Volt 1 Phase. Complete Base / Chip Tray with Storage Compartment. X Axis Power Feed. Z Axis Power Feed. One Shot Lubrication System. Fine Down Feed on Quill. Operator’s Manual and Parts List. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-833T 8×33 VERTICAL MILLING MACHINE, 5 YEAR WARRANTY FREE SHIPPING TAIWAN” is in sale since Wednesday, July 06, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-833T
• Country/Region of Manufacture: Taiwan