Product name:Single-flute spiral milling cutter Material: Integral tungsten steel Use: Density board, acrylic, plastic board, aluminium board. Machines: engraving machine, fine engraving machine, CNC machining centre. Package include: According to your choice. Please make sure your address 100% right. We will try our best to help you solve the problems. Your satisfaction is very important for us. Due to high volume of daily incoming emails and time zone difference, please allow 24 hours for us to reply. For the funcitonal products in our shop, we make sure that the functions are the same as description, but the actual color and shape may looks a little different from pictures because of the technical improvement and manufacturing variance.

C12M-SCLCR06 Solid Carbide Anti-Vibration Boring Bar for CCMT060204 CNC Lathe. A carbide (tungsten steel) anti-vibration tool holder for internal hole turning, featuring high rigidity and shock resistance, suitable for deep hole and high-precision machining 2. Tool shank material: Solid carbide. Compared to ordinary steel tool holders, it boasts higher rigidity, significantly enhancing shock resistance while ensuring machining accuracy and surface finish. C04G-SCLCR03 C05H-SCLCR03 C05H-SCLCR04 C06J-SCLCR03 C06J-SCLCR04 C06J-SCLCR06 C07K-SCLCR04 C07K-SCLCR06 C08K-SCLCR04 C08K-SCLCR06 C08M-SCLCR06 C10K-SCLCR06 C10M-SCLCR06 C12M-SCLCR06 C12M-SCLCR09 C12Q-SCLCR06 C12Q-SCLCR09 C14Q-SCLCR06 C14Q-SCLCR09 C16R-SCLCR06 C16Q-SCLCR09 C18R-SCLCR09 C20R-SCLCR09 C20S-SCLCR09 C25T-SCLCR09 C25T-SCLCR12.

AlTiN coating forms a stable aluminum oxide layer at elevated temperatures, providing superior thermal protection and oxidation resistance. Ideal for high-speed machining of hardened steels, stainless steels, and other difficult-to-cut materials. Manufactured from premium-grade solid carbide for maximum rigidity and edge retention. Maintains dimensional accuracy and cutting performance even under heavy cutting conditions on high-hardness workpieces. Solid carbide substrate rated at HRC 55, engineered to machine hardened materials up to HRC 45. Capable of performing both roughing and semi-finishing operations directly on heat-treated molds, reducing tool transitions and mold-making cycle time. 4-Flute Square End Design. 4-flute geometry provides higher feed rates and superior surface finish compared to 2-flute alternatives. Square end profile delivers clean, precise bottom edges for pocketing, profiling, and slotting applications. Extended Tool Life & Cost Efficiency. AlTiN coating combined with solid carbide substrate significantly extends tool life and reduces tool change frequency. Fewer interruptions mean improved machining rhythm and lower per-part production costs. Compatible with CNC machining centers, standard milling machines, engraving machines, and high-speed routers. Suitable for both production environments and job shop applications. D a size not listed? Your satisfaction is our top priority. We are committed to working with you to ensure a swift and satisfactory resolution. APO/FPO & PO Box Addresses. We guarantee a prompt response to all emails within 24 hours (please allow a few hours for time zone differences). If your address is not l. Before requesting a return, please double-check the issue and contact our customer service with a detailed description and photos for confirmation. Ordered the wrong model/color, changed mind, or no longer needed. Items must be in new, unused condition with no signs of man-made damage. Used or altered items will not be accepted.

Name:Two-flute Integral Alloy End Mills Coating:TiAN nano-coating Shank diameter:4/6/8/10/12/14/16/18/20mm HRC:45° Helix angle:35 Number of flutes:2 flute Material:Stainless steel, cast iron, copper, graphite, plastics, composites, etc. Applicable machines:CNC machining centres, engraving machines, fine engraving machines and other high-speed machines Note:Please allow minor errors due to manual measurement. Thank you for your comprehension. Monitors are not calibrated, the element color shown in the photos may differ slightly from the real object. Please take the real one as standard. Package include: According to your choice. Please make sure your address 100% right. We will try our best to help you solve the problems. Your satisfaction is very important for us. Due to high volume of daily incoming emails and time zone difference, please allow 24 hours for us to reply. For the funcitonal products in our shop, we make sure that the functions are the same as description, but the actual color and shape may looks a little different from pictures because of the technical improvement and manufacturing variance.

Coolant Hole Coated Solid Flat Bottom Drill 3mm-14mm Twist whit Stainless steel. Drill point angle: 180°. Diameter range: D3.010.0mm (Specification spacing: 0.1). Diameter range: D10.514.0mm (Specification spacing: 0.5). Features: Machining curved surfaces, beveled surfaces, countersunk holes, cross holes, semi-circular holes, thin plates, tap bottom holes, etc. Drillable, reamable, no fixed point is required on any workpiece surface. Flat bottom drills are recommended for scenarios where sharp angle drills are not suitable. Applicable materials: plastic, copper aluminum, steel, stainless steel, titanium alloy, superalloy, quenching materials, etc.

Name:Two-flute Integral Alloy End Mills Material:Tungsten Steel Coating:TiAN nano-coating HRC:45° Helix angle:35 Number of flutes:2 flute Material:Stainless steel, cast iron, copper, graphite, plastic, composite materials, etc. Applicable machines:CNC machining centres, engraving machines, fine engraving machines and other high-speed machines. Package include: According to your choice. Please make sure your address 100% right. We will try our best to help you solve the problems. Your satisfaction is very important for us. Due to high volume of daily incoming emails and time zone difference, please allow 24 hours for us to reply. For the funcitonal products in our shop, we make sure that the functions are the same as description, but the actual color and shape may looks a little different from pictures because of the technical improvement and manufacturing variance.

Material:Tungsten steel blade, 45# steel body. Material: aluminium alloy, iron, steel, copper and other materials. Applicable machines: CNC machining centres, engraving machines, precision engraving machines and other high-speed machines. Package include: According to your choice. Please make sure your address 100% right. We will try our best to help you solve the problems. Your satisfaction is very important for us. Due to high volume of daily incoming emails and time zone difference, please allow 24 hours for us to reply. For the funcitonal products in our shop, we make sure that the functions are the same as description, but the actual color and shape may looks a little different from pictures because of the technical improvement and manufacturing variance.

Name:3 Flute End Mills for Aluminium Material: Integral tungsten steel Grain size:0.6UM HRC:55° Material: aluminium alloy, aluminium parts, etc. Equipment:CNC, engraving machine, high-speed machine, etc. Package include: According to your choice. Please make sure your address 100% right. We will try our best to help you solve the problems. Your satisfaction is very important for us. Due to high volume of daily incoming emails and time zone difference, please allow 24 hours for us to reply. For the funcitonal products in our shop, we make sure that the functions are the same as description, but the actual color and shape may looks a little different from pictures because of the technical improvement and manufacturing variance.

Product Name:Four flute monobloc end mills Coating:nACo coating HRC:63° Helix angle:45° Number of flutes:4 Material:Stainless steel, cast iron, copper, titanium, graphite, plastics, composites, etc. Applicable machines:CNC machining centres, engraving machines, precision engraving machines and other high-speed machines. Package include: According to your choice. Please make sure your address 100% right. We will try our best to help you solve the problems. Your satisfaction is very important for us. Due to high volume of daily incoming emails and time zone difference, please allow 24 hours for us to reply. For the funcitonal products in our shop, we make sure that the functions are the same as description, but the actual color and shape may looks a little different from pictures because of the technical improvement and manufacturing variance.

Name:Four flute monobloc end mills Material: tungsten steel Coating:TiAN HRC: 45° Helix angle:35° Number of flutes:4 Material:Stainless steel, cast iron, titanium alloy, graphite, plastics, composites, etc. Applicable machines:CNC machining centres, engraving machines, precision engraving machines and other high-speed machines. Package include: According to your choice. Please make sure your address 100% right. We will try our best to help you solve the problems. Your satisfaction is very important for us. Due to high volume of daily incoming emails and time zone difference, please allow 24 hours for us to reply. For the funcitonal products in our shop, we make sure that the functions are the same as description, but the actual color and shape may looks a little different from pictures because of the technical improvement and manufacturing variance.