ACCUTURN #GT-27 CNC TURNING CENTER – GANG STYLE – FAGOR. UPGRADE TECHNOLOGY INC. PLEASE CONTACT DE OR JOHN WITH ANY QUESTIONS. We have a loading dock and fork lifts with the ability to load any type of truck. Please indicate the following. We can either use your account number or provide a rate quote. Here’s the link to upload to.

This unit has been on the shelf for years marked “dead” I don’t know what the issue is or why it is not working just that at one point it was opened and looked at. There is also a brand or model skyey near the model and serial number. I do not have the original bolts for the outer case. There is also a missing plastic cover for over the bottom. (I was told they get knocked off by carts all the time).

This arbor support is used but will fuction as new.

Very nice knee mill, Enco base with eagle (like Seiki XL) head converted from mechanical varidrive to fixed pulley belt with variable frequency drive and baldor 3hp inverter duty motor. Erickson quick change qc 30 taper spindle with wrench and one tool holder. No messing with a drawbar wrench, this is 1/4 turn quick release right at the spindle and your cutter is always the same length, no fooling with adjusting cutter up and down in an r-8 collet. One shot oiler, power feed on x axis, power vent fan on motor, vise included. This unit runs on regular single phase 230v power and you can vary the speed right at the inverter drive mounted on the head. Good ways, good candidate for a cnc conversion- the ac drive can be controlled by your cnc controller should you eventually go that route. In zip code 30527. Contact for clarification if this is unclear. Look at ALL of the photos. If you do not respond after the 3. Jelly on the right side of the listing page, then “contact member” link on the left side of the next page. “COMMERCIAL ADDRESS” MEANS A LICENSED BUSINESS WITH A SIGN OUT FRONT AND DOCK OR LIFT. This could be hundreds of dollars difference. For our location google Clermont GA 30527 or industrialtoolandmachineworks (one word). If damaged in transit you will need to file the claim. CONDITION: Every attempt is made at accurate description. ASK for full res photos, video of operational testing, etc. Photos may have distortion, are for general scale only. Do not rely on photos even with rulers for critical dimensional data or quantity. Opinion of condition is only that, an opinion. SOME ITEMS MAY HAVE DUST, DIRT, PAINT, ENGRAVING OR GREASE, CORDS MAY HAVE REPAIRS. HARDWARE NOT SHOWN IS NOT INCLUDED. Ask for better pics if you care. All items subject to local sale while listed. DO NOT JUST ASK FOR UPS RED. THERE ARE 6 DIFFERENT SPEEDS OF UPS: Ground, 2. Day air end of day for about 2x ground price, next day air saver for about 2x 2. Day air price, next day air 10:30am (add about 10%), and next day air 8am for about 2x the 10:30am price. If that data is incorrect you may never get your package, so make sure your info is current. We have absolutely no control over time in transit with any carrier. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tom.jelly” and is located in this country: US. This item can be shipped to United States.

• Spindle Horsepower: 3 hp
• Machine Type: Vertical Milling Machine
• Power Source: Electric
• Custom Bundle: No
• Spindle Taper: QC 30
• Modified Item: No
• Brand: Unbranded
• Function: Drilling, Milling
• Control: Automatic, Manual, Semi-Automatic
• Max Spindle Speed (RPM): 4200
• Voltage: 240 V

Set consisting of collets. 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 7/16″ 1/2″ 9/16″ 5/8″ 11/16″ 3/4″ 16/16″ 7/8. Nikken quick change collet set 0-1/2 keyless chuck. 3/8″ 1/2″ 5/8″ 3/4″ 1″ 1 1/4″. Carbide inserted face mill. R8 taper slitting saw. Added criterion model S 11/2 boring head and slitting saw see pictures. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rammachines” and is located in this country: US. This item can be shipped to United States.

• Brand: Bridgeport
• Function: Milling

Kearney trecker 2ck 3ch Horizontal Mill Over Arm Support B style. This was made in July of 1954 and unfortunately at some point was Seperated from it’s milling machine. I bought a 2ch and it came with it, as you can see it doesn’t fit my machine. Ask questions about it and I can try and answer them. Feel free to shoot me an offer, I don’t know how much these are worth and there isn’t much to compare it to. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “coodaw-32″ and is located in this country: US.

• Brand: KEARNEY & TRECKER
• Function: Milling
• Model: Kearney trecker 2ck 3ch

This is a Newport Bridgeport Style Milling Machine Loaded with options DRO, Power Feed, single point Lube… Tested and Running excellent! X axis Power Table Feed. Step Pulley Speed Change. 2 HP 220v 3 Phase. 42″ x 9″ Table. Table Travel (X-Axis) 30 in. Saddle Travel (Y-Axis) 12 in. Quill Travel 5 in. Knee Travel (Z-Axis) 16 in. Ram Travel 12 in. Table to Spindle Nose Gage Line. Overall Size 492 x 9 in. (1245 x 299 mm). Working Surface 42 x 9 in. (1245 x 229 mm). T-slot Size 0.625 in. Height above Floor max. Weight of Workpiece max. (continuous) 1 hp (1.2 kW). High (infinitely variable) 660 – 2720 rpm. Low 80 – 325 rpm. Power Quill Feed 0.0015 in. /rev (0.038 mm). 0.003 in. /rev (0.076 mm). 0.006 in. /rev (0.152 mm). Power Quill Feed 3/4 in. Milling Capacity (mild steel) 3/4 in. Boring Range (mild steel) 6 in. Spindle Diameter 1.875 in. Quill Diameter 3.375 in. Auto (X, Y) 100 ipm (2540 mm/min). Manual (X, Y) 100 ipm (2540 mm/min). Feedrate Range (X, Y) 0.1 – 35 ipm (2 – 889 mm/min). Minimum Increment 0.0001 in. 8.3 x 5.3 ft. (2.53 x 1.62 m). 8.3 x 7.8 ft. (2.53 x 2.4 m). Height 7.04 ft. Net Weight 1930 lb (875 kg). All information deemed accurate but may vary from model to model. Contact Larry for any questions you may have.. Fast Application, it’s all filled in for you.. Online leasing applications (get LOW monthly payments). Please Note: Not all machines may qualify for Leasing. Payments: We accept all Major Credit Cards, Bank Wires, Company and Personal Checks. We always get better rates.. CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing. Unless otherwise specified, prices quoted are F. O. B. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user’s responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “palmtreespecialties” and is located in this country: US. This item can be shipped to United States.

• Brand: Newport Machine Tool Corp.
• Type: Milling Machines
• Model: 2S

1982 Ex-Cell-O Style 602 Ram Turret Milling Machine. 2 HP Variable Speed Milling Head. Compound Swivel Mount for Versatility in Setup’s. Standard R8 Spindle Taper. Infinitely Variable Spindle Speeds. Hand Dials for Table and Cross Travel. Front and Rear Way Covers. Wired 230V 3 Ph, 60 Hz. Table Size: 42″ x 9″. Z-Axis Travel: 16 – Knee. Spindle Speeds: 85 – 4,000 RPM Infinitely Variable. Spindle Motor: 2 HP. Spindle Nose to Table Top: 0 – 18.5. Head Movement – Left to Right: 90 Degrees. Head Movement – Front to Back: 45 Degrees. Turret Rotation: 360 Degrees. Machine Dimensions: 66″ x 84″ x 80. Machine Weight: 2,950 lbs. Prepping and loading is not included in price and is charged additionally based on individual item unless otherwise noted. Contact ABL Technology for more information. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rodsco12″ and is located in this country: US. This item can be shipped to United States.

• Model: Style 602
• Machine Type: Milling Machine
• Model Year: 1982
• Function: Milling

Comet Vertical Mill Milling Machine. Table: 10″ x 50″ , Fagor Digital Read Out, Power Feed. 3 HP ACER Head (almost new). Very Nice & Clean Machine! This Machine is Ready for inspection at our warehouse. In Oxnard, CA 93033. 8O5 24O – 1638. The item “Comet Vertical Mill Milling Machine 10 x 50 DRO 3 HP ACER Head Bridgeport Style” is in sale since Tuesday, November 6, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amiron_machinery” and is located in Oxnard, California. This item can’t be shipped, the buyer must pick up the item.

• MPN: Does Not Apply
• Brand: COMET

MaxMill Max Mill Vertical Milling Machine 9 x 42 DRO Bridgeport Style. 8o5 24o – 1638. Please see pictures for additional details. The item “MaxMill Max Mill Vertical Milling Machine 9 x 42 DRO Bridgeport Style” is in sale since Monday, May 10, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amiron_machinery” and is located in Oxnard, California. This item can’t be shipped, the buyer must pick up the item.

• Model: Bridgeport 42
• Machine Type: Vertical Milling Machine
• MPN: Does Not Apply
• Brand: Bridgeport