Nice power feed on the table. Has a DRO and scales but it does not appear to work. The item “Bridgeport Style Mill” is in sale since Wednesday, September 23, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “lurby” and is located in Wallingford, Connecticut. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Function: Milling

3HP Spindle Motor, variable speed. R8 (NST#30) Spindle Material SCM415(SAB4115)Hardened & Ground. Highly Improved Vari-Speed Head. High frequency heat treat & Chrome plated quill, then precision ground. Super precision preloaded P4 angular bearing. Spindle material is SAE4115 (SCM415) full hardened through carbonizing heat treatment. Spindle thread is ground. Internal thread of spindle nut is gound. 0.0015″/ 0.003″ / 0.006 rev. Quill travel: 5 / Quill diameter 3. Power Output: variable speed 230V/460V 3 phase 3HP. 0.0015 – 0.003 – 0.006. (60Hz) 60-4500, (50Hz) 50-3800. The item “Bridgeport Style Milling Machine Head VS R8 3HP 230V/460V” is in sale since Saturday, April 6, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “atmi1992″ and is located in Ontario, California. This item can be shipped to United States.

• Model: 2V-HEAD
• Country/Region of Manufacture: Taiwan
• Brand: Manford

#MU-400VA OKUMA FULL 5-AXIS TRUNNION STYLE CNC VERTICAL MACHINING CENTER New 2005, Serial No 110594, Model MU-400VA. EQUIPPED WITH: Okuma OSP-E100M-H CNC Control 5-Axis Full Contouring Trunnion Mounted 15.75 Rotary Table – CAT 40 Spindle Taper 20-Position Automatic Tool Changer Remote Handwheel – RS-232 Port – 8000 RPM Spindle DNC-DT (Optional) – Spindle Chiller Automatic Pneumatic Doors – Light Curtain Safety Doors Auxiliary Hydraulic Tank For The Work Table Which Is Plumbed For Automatic Power Part Clamping Thru Spindle Flood Coolant System (213 PSI) Chip Conveyor – Manuals. NOTE: Machine Appears To Be In Very Good Conditon With Only 6900 Machine Cutting Hours. Machine subject to prior sale. The item “#MU-400VA OKUMA 5-AXIS TRUNNION STYLE CNC VERTICAL MACHINING CENTER #28720″ is in sale since Friday, August 30, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mohawkmachinery” and is located in Cincinnati, Ohio. This item can be shipped to United States.

• Machine Type: Machining Center
• Max Spindle Speed (RPM): 8000
• X-Axis Travel Bed: 30
• Y-Axis Travel Bed: 18.11
• Z-Axis Travel Bed: 18.11
• Brand: Okuma

Recent searches

• okuma MU-400VA модель станка скачать

DIY Gantry style CNC Milling Machine cast-iron frame. Gantry x1 (preinstalled and aligned). Z platform x1 (drilled for water cooled spindle mounts). Water Cooled spindle mount x2. NET weight 130 kg. This frame HIWIN HGH20CA linear guides and rails. Can be outfitted with a low speed spindle to cut materials such as plastic, aluminum, iron, steel, stainless steel and other metals or an air/water cooled high speed spindle to cut aluminum, wood, plastic and soft metals like aluminum. X axis effective travel is 300mm. Y axis effective travel is 400mm. Z axis effective travel is 125mm. Work table size: 300X400mm. All axis utilize a metric 1605ballscrews. Uses standard BK12 / BF12 ballscrew mounts. The ballscrew drawing are included. Packaged in a wooden box size: 635x603x635mm. The item “DIY Gantry Style CNC Milling Machine Cast-Iron Frame for metal” is in sale since Thursday, January 16, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “cnctools2004″ and is located in Saint Petersburg, Florida. This item can’t be shipped, the buyer must pick up the item.

• Brand: Unbranded
• Custom Bundle: No
• Machine Type: Milling Machine
• Model: 3018
• Function: Drilling
• MPN: 3018
• Control: CNC

Bridgeport model BH 6519 Milling Machine with Feed Motor and M1 Style Head. Missing handle as shown in last photo but otherwise in working condition. The item “Bridgeport model BH 6519 Milling Machine with Feed Motor and M1 Style Head USED” is in sale since Thursday, February 27, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “whamjr58″ and is located in Tolland, Connecticut. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Machine Type: Milling Machine

Vertical and horizontal spindles use no. 40 tooling DIN 2080 (some included) X / Y / Z axis travels are 17.7 / 12 / 13.7. 230 volts, 3 phase input. Backlash in X =. 004 / Y =. If not for a little paint off in bottom of chip pan I would have surmised this mill was never used. Only curiosity is an area where the Z axis plastic hand wheel have been notched (see photo). Original paint, spindles sound quiet as new. Tooling included- 4 pieces no. 40 / ER collet style. Banded to skid and loaded at no charge. The item “Emco FB-4 Deckel style milling machine New lower price” is in sale since Tuesday, September 17, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “procyon-machine” and is located in Ridgeland, South Carolina. This item can be shipped to United States.

BRIDGEPORT STYLE MILLING MACHINE VARIABLE SPEED HEAD SHARP BRIDGEPORT MILL. It does operate correctly, but does need a upper bearing replaced near the brake drum. The item “BRIDGEPORT STYLE MILLING MACHINE VARIABLE SPEED HEAD SHARP BRIDGEPORT MILL” is in sale since Monday, May 6, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “1070lemans” and is located in Elizabethtown, Indiana. This item can’t be shipped, the buyer must pick up the item.

• Brand: Sharp
• Model: 2J style Head
• Modified Item: No
• MILLING MACHINE: Variable Speed head
• MPN: 2060080

Bridgeport style milling machine 3/4 size, Perfect size for the serious home hobbyist. Mill can be used manually or full 3 axis cnc. 220 volt single phase power. End mills, heavy duty milling machine vice/w rotatable base, R8 collets, and other tooling. Mach3 CNC and other related software, computer and all shop made electronic controls included in a shop made cabinet. Table travel approx: XYZ: 36/12/12. The CNC software (Mach3) is loaded on an older windows XP computer as a slower speed computer is necessary to power the system. The table cranks have been removed (still there) because it is much easier to move the tables automatically with the built-in table Gecodrive stepper motors. Included is a copy of an older version of AutoCad which can be used to draw your parts and generate the G code for the CNC mill. The item “Milling Machine CNC 3 Axis Bbridgeport Style” is in sale since Saturday, January 5, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “balsawood7221e” and is located in Boynton Beach, Florida. This item can’t be shipped, the buyer must pick up the item.

• Brand: Unbranded
• Non-Domestic Product: Yes

KEARNEY & TRECKER 530 TF-20 PLAIN STYLE KNEE TYPE MILLING MACHINE WITH UNIVERSAL RIGHT ANGLE MILLING HEAD. CATALOG SPECIFICATIONS (to be verified). 550 volts with transformer to 230 volts. The item “KEARNEY & TRECKER 530 TF-20 PLAIN STYLE KNEE TYPE MILLING MACHINE” is in sale since Thursday, September 03, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “lurby” and is located in Wallingford, Connecticut. This item can’t be shipped, the buyer must pick up the item.

I’ve used it to repair custom machine parts (mostly as a drill press). Comes with a set of hold down clamps, a machine wise, 15 collets, a 3/4 Jacob’s Chuck and some used mill bits. I barely use it anymore and I need the space for other equipment. I have a forklift and loading dock to put it on your truck. Please see my other listings for more machines for your shop. The machine is also listed locally. The item “Enco Bridgeport Style 9 x 42 table Vertical Milling Machine” is in sale since Thursday, September 28, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tozo90″ and is located in Des Plaines, Illinois. This item can’t be shipped, the buyer must pick up the item.