So he’s the boss so we just ordered a new one and I have now been tasked to sell this one. As mentioned we did not hook up the wires(which is only 4) or fill with oil. I will tell you that the unit ran fine before the motor replacement but someone complained that it seemed to be running slow and that it may need new brushes. Then the motor was bought and now a entire unit is on the way. You will get the entire unit including the rod and stops and center support. It is pictured with the dial and handle but it will NOT be included in the sale. This sale will be final so make sure it will fit your mill if it is not a Bridgeport. UPDATE – This listing will be listing will be for PARTS ONLY. Please remember that you will need to wire and add oil to make this feed work. Well here we go again. We have had many of you requesting to see the motor end, gears and the gearbox so in the morning we will once again take apart the unit and update with additional photos. I have had all kind of questions concerning the type of sealant we used, wanting to see the end of the motor to confirm its age and what the torque specs were when we reassembled. This seems to be the easiest way(not for me) for you to ensure the reassembly is just the way you desire. I will upload the additional pics. Please remember that this will not be in running condition when it arrives to your location! At a 55 degree angle relative to the sun or anything else! NEW PICTURES ARE UPDATED! The item “BRIDGEPORT Mill 6F X-AXIS Power feed with rod center support and stops. Complete” is in sale since Wednesday, September 28, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “husaler” and is located in Pensacola, Florida. This item can be shipped to United States.

• Brand: Bridgeport
• Country/Region of Manufacture: United States
• Model: 6F

WE ALWAYS CONSIDER ALL REASONABLE OFFERS AND MANY ARE PROMPTLY ACCEPTED AS WE ARE A SMALL DEALER WITH A VERY LOW OVERHEAD. “MAKE YOUR BEST OFFER”. FADAL 1998 CNC VERTICAL MACHINING CENTER 3016, 4TH AXIS 6 W/BALL LOCK TURNION & END SUPPORT, RIGID TAP, and more. With the following approximate specifications and additional equipment. 38″ x 16″ Table Load Capacity……………………………………… 1,500 LBS Longitudinal Travel (X-Axis)………………………….. 30 Cross Travel (Y-Axis)……………………………………. 16 Vertical Travel (Z-Axis)………………………………….. 20 Spindle Nose to Table…………………………. 4″ – 24″ Rapid Traverse Rate (X & Y-Axes)………….. 700 IPM Rapid Traverse Rate (Z-Axis)…………………. 600 IPM Tool Storage Capacity………………………. 15 HP Spindle Speeds Range………………………………….. 10- 10,000 RPM Spindle Taper……………………………………………….. 220/460/3/60 Approximate Machine Dimensions………………… 87″ x 106″ Approximate Machine Height……………….. 95 Approximate Machine Weight……………. Fadal 88HS CNC Control. RS-232 Port, 3-1/2 Floppy Disk Drive. 4th Axis Pre-Wire with Drive. 6 4-th Axis Rotary Table set up with a Ball Lock Trunnion and End-Support. Expanded Multiple Part Program Storage. 21 Station Automatic Tool Changer. Full Enclosure & Coolant System. CONDITION: VERY GOOD USED CONDITION Mfg Date: 1998. LOCATION: MID-WESTERN, USA UNDER POWER FOR INSPECTION. Appears to be in a. “VERY GOOD Used Condition”. “Feedback and About Us”. Where you will find that we. For more expensive ITEMS acomodations can be made WITH PRIOR PERMISSION to pay with Pay Pal. We additionally accept personal, company, certified, cashiers checks drawn on recognizable U. Banks and accept bank wire transfers. Due to Homeland Security Regulations. We thank you in advance for your interest in this item and should you have any questions please feel free to ask them of us and we will try to answer them. WE INVITE YOU TO SEND US INFORMATION CONCERNING ANY USED EQUIPMENT YOU WISH TO LIQUIDATE AS WE WILL TRY TO SECURE A FAIR MARKET VALUE FOR THE ITEMS AND EXPECT VERY LOW COMMISSIONS FOR OUR SERVICES. The item “FADAL 3016 RIGID TAP 4TH AXIS WithBALL TRUNION & END SUPPORT” is in sale since Thursday, January 21, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jona-heath” and is located in Dover, Kentucky. This item can be shipped to United States.

• Brand: FADAL
• MODEL 3016: 6″ 4TH AIXS
• BALL LOCKTRUNION & END SUPPORT: RIGID TAP
• TABLE WORK SURFACE 30 X 16″: TABLE LOAD CAP 1500 POUNDS
• X=30″ Y=16″ Z=20″: SPDL TO TABLE 4 – 24″
• TOOL CAPACITY 21: SPINDLE SPEEDS 10 – 10,000 RPM’S
• SPINDLE HP 15: SPINDLE NOSE CAT #40
• ELECTRICS 220/460/3/60: MACH DIM 87 X 108 X 96″ H
• MACHINE WEIGHE 8,000 POUNDS: FADAL 88HS CNC CONTROLLER
• RS 232 FLOPPY DISC DRIVE: 4TH AXIS PRE WIRE WITH DRIVE
• EXPANDED MULTI PART PROGRAM: GRAPHICS – HIGH SPEED CPU
• SELF DIAGRAPHICS: AXIS ERROR COMPENSATION
• FULL ENCLOSURE & COOLANT SYS: ALL AVAILABLE MANUALS
• UNDER POWER FOR INSPECTION: MID WEST LOCATION

Milling Machine Accessory – Horizontal Milling Attachment R8 w/ Support &Arbor. Horizontal Milling Attachment with Arbor – R8 Fits Bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and R8 spindle taper Converts a vertical mill into a horizontal mill Note: Maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078) The dovetail angle on milling arbor support is 50°. (Note: 50° is more common than 55°, we have both available) Complete Set Includes. 7/16-20 bolt with 1/2 hex head. If you have any questions regarding this item, please let us know we’ll be happy to help. This is the arbor support that slides into rams dovetail. This is the milling arbor. Arbor diameter is 1. _gsrx_vers_625 GS 6.9.7 (625). The item “Milling Machine Accessory Horizontal Milling Attachment R8 with Support &Arbor” is in sale since Monday, December 14, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped worldwide.

• Country of Manufacture: Taiwan, Province of China

Bridgeport Right Angle Attachment with Arbor Support. This listing is for a Bridgeport brand right angel attachment that includes the arbor and the arbor support. It is in good working condition. It has not been used much. It does have some rust on the arbor. For additional information please message me. The item “Bridgeport Right Angle Attachment with Arbor Support” is in sale since Wednesday, November 25, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “ruckmachiningservice” and is located in Pine River, Wisconsin. This item can be shipped to United States.

• Brand: Bridgeport

Milling Machine Accessory – Horizontal Milling Attachment R8 w/ Support &Arbor. Horizontal Milling Attachment with Arbor – R8 Fits Bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and R8 spindle taper Converts a vertical mill into a horizontal mill Note: Maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078) The dovetail angle on milling arbor support is 50°. (Note: 50° is more common than 55°, we have both available) Complete Set Includes. 7/16-20 bolt with 1/2 hex head. If you have any questions regarding this item, please let us know we’ll be happy to help. This is the arbor support that slides into rams dovetail. This is the milling arbor. Arbor diameter is 1. _gsrx_vers_625 GS 6.9.7 (625). The item “Milling Machine Accessory Horizontal Milling Attachment R8 with Support &Arbor” is in sale since Friday, October 09, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped to United States, to Canada, to United Kingdom, to Australia.

• Country of Manufacture: Taiwan, Province of China

Milling Machine Accessory – Horizontal Milling Attachment R8 w/ Support &Arbor. Horizontal Milling Attachment with Arbor – R8 Fits Bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and R8 spindle taper Converts a vertical mill into a horizontal mill Note: Maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078) The dovetail angle on milling arbor support is 50°. (Note: 50° is more common than 55°, we have both available) Complete Set Includes. 7/16-20 bolt with 1/2 hex head. If you have any questions regarding this item, please let us know we’ll be happy to help. This is the arbor support that slides into rams dovetail. This is the milling arbor. Arbor diameter is 1. _gsrx_vers_618 GS 6.9.6 (618). The item “Milling Machine Accessory Horizontal Milling Attachment R8 with Support &Arbor” is in sale since Saturday, August 29, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped to United States, to Canada, to United Kingdom, to Australia.

• Country of Manufacture: Taiwan, Province of China

Milling Machine Accessory – Horizontal Milling Attachment R8 w/ Support &Arbor. Horizontal Milling Attachment with Arbor – R8 Fits Bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and R8 spindle taper Converts a vertical mill into a horizontal mill Note: Maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078) The dovetail angle on milling arbor support is 50°. (Note: 50° is more common than 55°, we have both available) Complete Set Includes. 7/16-20 bolt with 1/2 hex head. If you have any questions regarding this item, please let us know we’ll be happy to help. This is the arbor support that slides into ram’s dovetail. This is the milling arbor. Arbor diameter is 1. _gsrx_vers_612 GS 6.9.5 (612). The item “Milling Machine Accessory Horizontal Milling Attachment R8 with Support &Arbor” is in sale since Monday, July 06, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped to United States, to Canada, to United Kingdom, to Australia.

• Country of Manufacture: Taiwan, Province of China

VERTICAL MILLING MACHINE RIGHT ANGLE ATTACHMENT ARBOR SUPPORT FITS BRIDGEPORT. Please read descriptions carefully, we list any features, specifications and details we know and/or research. Don’t assume items come with any accessories not shown in pictures. All items come as shown in pictures. We offer storage services from small items to full containers. Don’t leave Negative or Neutral feedback before doing it. We are professionals and we are here to help you. All items must be paid at same time for the same invoice. 1 to 6 lbs. 7 to 20 lbs. 21 to 35 lbs. 36 to 80 lbs. For inspection please call ahead. We are located at. 14911 Don Julian Rd. Liability Please understand that managing tools and machinery can be dangerous, our items weight can go from a couple of pounds to hundreds or even thousands. For this reason we have to limit local pick-ups to the use of forklift on items heavier than 100 lbs. Unless stated in the listing above. For Nevada, Arizona and California we use LA Machinery Moving, click here. Please call for pricing on items that require custom skid or custom crating. 1 Keep all original packing together as the carrier may require it to process the claim. 2 Take clear photos of the box & item showing the damage. 2 Take clear photos of the pallet/item before offloading. Once all that information is received we will contact the carrier and submit a claim. Get Vendio Gallery – Now FREE! The item “VERTICAL MILLING MACHINE RIGHT ANGLE ATTACHMENT ARBOR SUPPORT FITS BRIDGEPORT” is in sale since Thursday, June 04, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “1machinerysales” and is located in La Puente, California. This item can be shipped worldwide.

Items are in very good seldom maybe never used condition. Some chipping on paint from storage. I don’t believe the support has ever been attached to a mill.The item “BRIDGEPORT RIGHT ANGLE HEAD HORIZONTAL MILLING ATTACHMENT WITH ARBOR SUPPORT” is in sale since Friday, April 10, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “chas_terry” and is located in Calif. This item can be shipped to United States.

• Brand: Bridgeport

For sale is a like new bridgeport right angle head horizontal milling attachment with r8 shank and arbor support. In excellent fully functional condition. This setup was only used a handful of times. Right angle head includes screw for r8 collet. Arbor measures 15-1/8″ long x 1″ diameter with r8 shank.The item “BRIDGEPORT RIGHT ANGLE HEAD HORIZONTAL MILLING ATTACHMENT WITH ARBOR SUPPORT” is in sale since Sunday, April 05, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mattesglobaltrading” and is located in San Diego, California. This item can be shipped to United States.

• Brand: Bridgeport