Tree Journeyman 310 CNC Knee Mill Tree with Dynapath 20M CNC Control. TREE JOURNEYMAN 310 3 AXIS CNC KNEE MILL. 2HP AC Two-range spindle drive, Infinitely variable speed ranges 60-4200 RPM. Hardened and ground box ways mated to Turcite for stick-slip freedom and long accurate life. Split-screen graphics show top and side, or top and front views. Dynapath 20M (Conversational and offline G code programming, Drip feed capability). Tape Cassette and RS232C. 60,000 Characters standard. Machine Travels (X/Y/Z) 27 / 14/ 5.5. Knee Travel 15.75. Spindle to Table Distance 18 ¼. Spindle Center to Column Distance 14.1. Table Size 10 x 44. Speed Range 60 4200 rpm. Rapid Traverse Rate (X/Y/Z) 250 IPM. 1 to 100 IPM. Axis drive (DC servo motor) 1700 lbs. Drilling capacity (mild steel) 0.75 Diameter. Milling Capacity (mild steel) 2.0 cu. Floor area (doors open) 94 x 72. Power Requirements: 230 Volts/ 3PH/ 60 Hertz/ 30amp. Can Be Seen Under Power in our Downtown Louisville, KY 40203 Location! Glen at amerigomachinery dot com or 5024198183. The item “Tree Journeyman 310 CNC 3 Axis Knee Mill Tree with Dynapath 20M Control 30 taper” is in sale since Tuesday, September 05, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “cncmachineguy” and is located in Louisville, Kentucky. This item can be shipped to United States.

• Brand: Tree
• Model: Journeyman 310

This is a nice late model Van Norman milling machine with Original paint that is still quite presentable. It has the dovetail overarm and a 40 nmtb taper spindle. One shot lube and power feed table. Wired 220V 3 phase. This is a beast of a machine with a 3hp spindle motor. It takes up about the same space as a Bridgeport, but can handle cuts that you wouldn’t dream of trying on a Bridgeport. I’ve downsized to a much smaller shop and need to find this mill a good home. The item “Van Norman 1R3-22 Horizontal / Vertical Milling Machine with 40 taper nmtb spindle” is in sale since Tuesday, August 29, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “clutter2college” and is located in Orient, New York. This item can’t be shipped, the buyer must pick up the item.

• Brand: van norman

JET 1 HP 1-Phase R-8 Taper Milling/Drilling Machine. 1 HP 1-Phase R-8 Taper Milling/Drilling Machine – 350017. Adjustable Carbide Face Mill. Drill Press Angle Vise. Drill Chuck &, Chuck Arbor. One-piece cast-iron column for added support. Belt cover – quick slide latch allows faster belt adjustment to change spindle speeds. Base – taper allows for easier clean-up. Large hand wheel knobs. Heavy-duty tapered roller bearings support the spindle, resulting in greater tolerance and more accurate drilling depth. New positive quick-stop knob and easy-to-read external depth gauge. Working Surface of Table. Max Distance Spindle to Table. WHY OUR CUSTOMERS KEEP SHOPPING WITH US. SECURE & HASSLE FREE SHOPPING. We are available 7 days a week. All corded products are designed to work with North American 110/120V outlets only. The item “JET JMD-15, 1 HP 1-Phase R-8 Taper Milling/Drilling Machine 350017 New” is in sale since Wednesday, April 12, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “cpo-outlets” and is located in Lawrenceville, Georgia. This item can be shipped to United States.

• Brand: JET
• MPN: 350017
• Freight Delivery Option: Curbside
• Cross Travel (Y-axis): 6-in
• Drilling Capacity: 1-in
• End Mill Capacity: 1/2-in
• Face Mill Capacity: 2-1/2-in
• Max Distance Spindle to Table: 15-in
• Maximum Table Travel: 14-in
• T-Slots: 4
• T-Slots Size: 9/16-in
• Working Surface of Table: 7-1/2 in. x 23 in.

Jet 350018 JMD-18 Mill/Drill With R-8 Taper 115/230V 1Ph. Jet 350018 JMD-18 Mill/Drill With R-8 Taper 115/230V 1Ph Mill drills are a lighter alternative to a milling machine. These combine a belt driven drill press with the dual coordinate abilities of the milling machine’s table for flexibility and efficiency. A locking collet prevents the cutting tool from falling away from the spindle when lateral forces are experienced against the bit. Although light in construction, the JMD Milling Drilling Machines possess the advantages of space-saving versatility, affordability and light machining capability. Features: For added safety, the JMD-18 follows strict guidelines and electrical requirements to be certified by CSA Group One-piece cast iron column for added support Belt cover with quick slide latch allows faster belt adjustment to change spindle speeds Base taper allows for easier clean up Drill Press angle vise UL Listed motor Extra large worktable Positive quick-stop knob and easy to read internal depth gauge 360 head swivel Work lamp Forward and Reverse Switch drill chuck, chuck arbor Draw bar Drill Chuck Guard Adjustable Carbide facemill Specifications: Drilling Capacity In. : 1-1/4 Face Mill Capacity In. : 3 End Mill Capacity In. : 15-7/8 Max Distance Spindle to Table In. : 18 Spindle Taper In. X TPI: R-8 Spindle Travel In. : 5 Quill Diameter In. : 3 Column Diameter In. : 4-1/2 Number of Spindle Speeds: 12 Range of Spindle Speeds (RPM): 150 – 3,000 Table Size (L x W) In. : 9-1/2 x 32-1/4 Table Longitudinal Travel In. : 20-1/2 Work Table Weight Capacity Lbs. : 400 T-Slots Number and Size In. : 4 and 5/8 T-Slot Centers In. : 1-13/16 Base Dimensions In. : 15-3/4 x 23-3/4 Motor (HP): 2 HP, 115/230V, 1Ph Overall Dimensions (L x W x H) In. : 47 x 40 x 51 Weight Lbs. Warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries, Inc. The item “Jet 350018 JMD-18 Mill/Drill With R-8 Taper 115/230V 1Ph” is in sale since Friday, May 26, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “fastoolnow” and is located in La Vergne, Tennessee. This item can be shipped to United States.

• Brand: JPW Industries
• MPN: 350018

JET 350017 JMD-15 Mill/Drill With R-8 Taper 115/230V 1Ph. Jet 350017 JMD-15 Mill/Drill With R-8 Taper 115/230V 1Ph Mill drills are a lighter alternative to a milling machine. These combine a belt driven drill press with the dual coordinate abilities of the milling machine’s table for flexibility and efficiency. A locking collet prevents the cutting tool from falling away from the spindle when lateral forces are experienced against the bit. Although light in construction, the JMD Milling Drilling Machines possess the advantages of space-saving versatility, affordability and light machining capability. Features: For added safety, the JMD-15 follows strict guidelines and electrical requirements to be certified by CSA Group One-piece cast iron column for added support Belt cover with quick slide latch allows faster belt adjustment to change spindle speeds Base taper allows for easier clean up Drill Press angle vise UL Listed motor Extra large worktable Easy to read external depth gauge 360 head swivel Work lamp drill chuck, chuck arbor Draw bar Drill Chuck Guard Adjustable Carbide facemill Specifications: Drilling Capacity In. : 1 Face Mill Capacity In. : 2-1/2 End Mill Capacity In. : 14-1/2 Max Distance Spindle to Table In. : 15 Spindle Taper In. X TPI: R-8 Spindle Travel In. : 3-1/2 Quill Diameter In. : 2-7/16 Column Diameter In. : 3-5/8 Number of Spindle Speeds: 12 Range of Spindle Speeds (RPM): 110 – 2,580 Table Size (L x W) In. : 7-1/2 x 23 Table Longitudinal Travel In. : 14 Work Table Weight Capacity Lbs. : 350 T-Slots Number and Size In. : 4 and 9/16 T-Slot Centers In. : 1-13/16 Base Dimensions In. : 12-1/2 x 19-3/4 Motor (HP): 1 HP, 115/230V, 1Ph Overall Dimensions (L x W x H) In. : 38 x 37-1/2 x 42 Weight Lbs. Warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries, Inc. The item “JET 350017 JMD-15 Mill/Drill With R-8 Taper 115/230V 1Ph” is in sale since Friday, May 26, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “fastoolnow” and is located in La Vergne, Tennessee. This item can be shipped to United States.

• Brand: JPW Industries
• MPN: 350017

Tree Journeyman 310 CNC Knee Mill Tree with Dynapath 20M CNC Control. TREE JOURNEYMAN 310 3 AXIS CNC KNEE MILL. 2HP AC Two-range spindle drive, Infinitely variable speed ranges 60-4200 RPM. Hardened and ground box ways mated to Turcite for stick-slip freedom and long accurate life. Split-screen graphics show top and side, or top and front views. Dynapath 20M (Conversational and offline G code programming, Drip feed capability). Tape Cassette and RS232C. 60,000 Characters standard. Machine Travels (X/Y/Z) 27 / 14/ 5.5. Knee Travel 15.75. Spindle to Table Distance 18 ¼. Spindle Center to Column Distance 14.1. Table Size 10 x 44. Speed Range 60 4200 rpm. Rapid Traverse Rate (X/Y/Z) 250 IPM. 1 to 100 IPM. Axis drive (DC servo motor) 1700 lbs. Drilling capacity (mild steel) 0.75 Diameter. Milling Capacity (mild steel) 2.0 cu. Floor area (doors open) 94 x 72. Power Requirements: 230 Volts/ 3PH/ 60 Hertz/ 30amp. Can Be Seen Under Power in our Downtown Louisville, KY 40203 Location! Glen at amerigomachinery dot com or 5024198183. The item “Tree Journeyman 310 CNC 3 Axis Knee Mill Tree with Dynapath 20M Control 30 taper” is in sale since Monday, July 24, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “cncmachineguy” and is located in Louisville, Kentucky. This item can be shipped to United States.

• Brand: Tree
• Model: Journeyman 310

This Listing is for a. Here are some features of this milling machine. R8 Spindle Taper Standard, so it uses the most commonly available tooling. High Precision Tapered Roller Spindle Bearings. Dovetail Column for rigidity and repeatability in the Z Axis. Manual Fine Down Feed on spindle for boring. Comes Standard with Cast Iron Base, Quill Depth DRO, and Large Milling Machine Type Handles for easier operation. This is what is all included with this listing. Cast Iron Stand, as shown. Quill DRO is standard. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 9″x31.5″. X Axis Travel 22. Y Axis Travel 8. Z Axis Travel (Knee) 17. Distance Spindle to Table – 18. Quill Travel 5. Spindle Taper R8. Main Motor Horsepower – 1.5HP. Voltage / Phase / Amps – 220 Volts, SINGLE Phase, 10 Amps. Approximate Machine Weight – 1100 LBS. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-932M 9×32 VERTICAL BENCHTOP MILLING MACHINE WITH CAST IRON STAND R8 TAPER” is in sale since Wednesday, December 07, 2016. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Make: Precision Matthews
• Model: PM-932M-BASIC
• Type: Manual, Vertical
• Model Year: 2016
• X-Axis Travel Bed: 21” – 25”
• Y-Axis Travel Bed: Less than 10”
• Z-Axis Travel Bed: 16” – 20”
• Highest Spindle Speed (RPM): 1501 – 2000
• Spindle Horsepower: 1.5
• Table Width: Less than 10”
• Table Length: 30” – 34.9”

JET 1 HP 1-Phase R-8 Taper Milling/Drilling Machine. 1 HP 1-Phase R-8 Taper Milling/Drilling Machine – 350017. Adjustable Carbide Face Mill. Drill Press Angle Vise. Drill Chuck &, Chuck Arbor. One-piece cast-iron column for added support. Belt cover – quick slide latch allows faster belt adjustment to change spindle speeds. Base – taper allows for easier clean-up. Large hand wheel knobs. Heavy-duty tapered roller bearings support the spindle, resulting in greater tolerance and more accurate drilling depth. New positive quick-stop knob and easy-to-read external depth gauge. Working Surface of Table. Max Distance Spindle to Table. WHY OUR CUSTOMERS KEEP SHOPPING WITH US. SECURE & HASSLE FREE SHOPPING. We are available 7 days a week. All corded products are designed to work with North American 110/120V outlets only. The item “JET JMD-15, 1 HP 1-Phase R-8 Taper Milling/Drilling Machine 350017 New” is in sale since Friday, August 26, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “cpo-outlets” and is located in Lawrenceville, Georgia. This item can be shipped to United States.

• Brand: JET
• MPN: 350017
• Cross Travel (Y-axis): 6-in
• Drilling Capacity: 1-in
• End Mill Capacity: 1/2-in
• Face Mill Capacity: 2-1/2-in
• Max Distance Spindle to Table: 15-in
• Maximum Table Travel: 14-in
• T-Slots: 4
• T-Slots Size: 9/16-in
• Working Surface of Table: 7-1/2 in. x 23 in.

This Listing is for a. Here are some features of this milling machine. R8 Spindle Taper Standard, so it uses the most commonly available tooling. High Precision Tapered Roller Spindle Bearings. Dovetail Column for rigidity and repeatability in the Z Axis. Manual Fine Down Feed on spindle for boring. Comes Standard with Quill Depth DRO, and Large Milling Machine Type Handles for easier operation as shown. This is what is all included with this listing. Quill DRO is standard. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 9″x31.5″. X Axis Travel 22. Y Axis Travel 8. Z Axis Travel (Knee) 17. Distance Spindle to Table – 18. Quill Travel 5. Spindle Taper R8. Main Motor Horsepower – 1.5HP. Voltage / Phase / Amps – 220 Volts, SINGLE Phase, 10 Amps. Approximate Machine Weight – 800 LBS. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-932M 9×32 VERTICAL BENCHTOP MILLING MACHINE WITH R8 TAPER 220V SINGLE PHASE” is in sale since Monday, November 07, 2016. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Make: Precision Matthews
• Model: PM-932M-BASIC
• Type: Manual, Vertical
• Model Year: 2016
• X-Axis Travel Bed: 21” – 25”
• Y-Axis Travel Bed: Less than 10”
• Z-Axis Travel Bed: 16” – 20”
• Highest Spindle Speed (RPM): 1501 – 2000
• Spindle Horsepower: 1.5
• Table Width: Less than 10”
• Table Length: 30” – 34.9”