10 x 53 Cincinnati Universal Horizontal Milling Machine, Model 2 ML, S/N 2J2U5B-3. To view under power follow the link below. Table Size 10 x 53. Swivels Left and Right. Spindle Speeds (16) 25 – 1500 RPM. HP 220/440 Volt 3 Phase. Feeds 1/4 – 30 IPM. Weight 4000 LBS Approx. Double Swivel Vertical Head on Factory Crane. Collets for Vertical Head. Good Condition, From a maintenance shop of a large corporation. Inspect Under Power in Our Lebanon NJ warehouse. The item “10 x 53 Cincinnati Universal Horizontal Milling Machine, Model 2 ML, Tooled” is in sale since Friday, July 20, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “michaelfinemachineryco” and is located in Lebanon, New Jersey. This item can be shipped to United States.

• Model: 2 ML
• Country/Region of Manufacture: United States
• Brand: CINCINNATI

Brown & Sharpe #2 Universal Milling Machine. Will Load for Free. The item “Brown & Sharpe #2 Universal Milling Machine” is in sale since Wednesday, December 13, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “rvas” and is located in Gary, Indiana. This item can’t be shipped, the buyer must pick up the item.

• Brand: Brown & Sharpe

1980′s Deckel FP2 with universal table. All inch dial/scale machine (alternativly, can display in metric on the DRO of course) built for USA market, 230 volts. Note original Heidenhain TNC 113 DRO was replaced with Positip model so that all 4 axis can be displayed on one screen. Also note how the install was true to Deckel original flex conduit, boxes for same. Even the work light is properly integrated into the body and wiring. Excellent condition, backlash in X axis is. 008, quiet and cool running….. One can run the machine for 40 minutes at highest RPM and both spindles feel as cool to the touch as they did before starting the machine. Integral variable speed DC drive X/Y/Z axis works perfectly in milling at all speeds, and rapid modes. Spindle drawbars are for external thread SK40 tools i. What Deckels usually use but I can change them to 5/8 internal thread standard no. 40 tooling drawbars, if you prefer. Orange vise shown in photo is not included. Universal table rotates 360 degrees via three speed transmission, with integral encoder (C axis on DRO) and tilts two directions via screws. Note original Deckel dial indicators for quick re tram back to zero degrees. This is probably the nicest Deckel manual milling machine in this country, thus the price. Paint is 95% original… I did touch up a small area near the base on the right side, all else is original paint in excellent condition. To me it seemed better to have a proper modern display that can display up to 6 axis and is still supported by Heidenhain. See my feedbacks for indications I tell it like it is. The item “Deckel FP2 with Universal Table and Positip 6 axis DRO” is in sale since Thursday, July 19, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “procyon-machine” and is located in Ridgeland, South Carolina. This item can be shipped to United States.

Used Brown and Sharpe #2 universal horizontal and vertical milling machine with 10×50 table 5hp 230v 3 phase motor. Table is in average condition with minor mill marks, scratches and dinges. The ways have some scratches and dinges but are decent. Backlash is a less than 1/4 turn in x and y. The original paint is pretty chipped up. The mill runs fine and is in average condition for its age. Includes 17ea nmtb 50 holders for the horizontal, 4ea arbors and spacers one missing but for the horizontal, 2ea overarm supports, 2ea dove tail adaptors and 2ea cross support arms, 10ea nmtb 40 holders for the vertical head, universal vertical head with integrated jib for installing, original indexing head with tailstock and mounts with shafts for gearing to the table, 3 ea indexing plates 15-20, 21-33, 37-49 plus complete set of 12ea change gears. Mill runs fine and all table feeds work. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Please check out my other auctions. Call three one four seven five zero one four zero three with questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days… The item “Brown Sharpe # 2 Universal Horizontal Vertical Milling Machine Lots Of Tooling” is in sale since Thursday, June 28, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “ddmo1″ and is located in Millstadt, Illinois. This item can be shipped to United States.

• Brand: Brown & Sharpe
• MPN: Does Not Apply

One of machine tool accessories for dividing workpieces into equal partitions. By using dividing scale ring, vernier, locating pin, index plate and change gear, workpieces placed can be divided into equal partitions according to your demand. It can be used for direct and indirect dividing. Able to complete gear, face and flute processing without need of accessories, however its whole construction is the same with the universal type. Can complete 2, 3, 4, 6, 8, 12, 24 division indexing. Are attached along with the dividing head for indirect dividing in any division indexing 2-50, 51-380 except prime numbers and certain other numbers. The front of dividing head dimension. The tail of the dividing head dimension. Uantity of dividing plate’s hole Helical gear reduction ratio. 100% brand new, of good quality. Divide any angle by the direct, indirect or differential methods. Head stock swivels to all angles. Direct mounted index plate has 24 divisions. Headstock Taper: 7 B&S. Weight: 23 kg (50.7 lbs). Package Dimensions: 410235205mm (1698inch). 1 X Dividing Head Set. 3 X Dividing Plates. 1 X 125mm 3 Jaw Chuck. The item “BS-0 Precision Semi Universal Dividing Head Tailstock Spindle with 5” 3 JAW CHUCK” is in sale since Monday, December 26, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “energysoul2018″ and is located in Rowland Heights, California. This item can be shipped worldwide.

• Note1: Buyers responsible for custom clearance.
• Note2: Buyers responsible for potential tariff.
• Model: Complete Dividing 5″ Head Set
• UPC: 607052794255
• Brand: DC HOUSE
• MPN: DCHOUSE09

Jack’s Rigging & Machinery L. M/N MH 600E Year 1987 Spindle 80-4000 RPM SK 40 Spindle Taper Working area 245 m/m x 354 m/m X Axis 600 mm Y Axis 400 mm Z Axis 400 mm Quill Stroke 80 mm Vertical swivel type milling head Control DMG; Member of Gildemeister Group Work light Coolant pump and tank Manuals Transformer 20 kVA Very Good Running Condition; Inspect under power. The item “MAHO MH600E Universal CNC Horizontal Milling Machine” is in sale since Monday, March 12, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jrigg213″ and is located in New Britain, Connecticut. This item can be shipped to United States.

Deckel FP1 Mk2 Universal Milling Machine. SN 30696 Approx Early 1960′s Manuf. Kurt Model D50 5 AngLock Vise, 3-Phase Converter, Collets, and. The FP1 is almost certainly (within its size range) the most. Could be desired by a professional or amateur engineer. Adaptable, versatile and ingenious conventional machine tool that is the machine a remarkably adaptable tool, it is also superbly. For those who don’t know about FP-1′s, we think and. Made, from the best quality materials; such quality does not come cheaply, and new ones have always been multiple tens of thousands. Basement, and unlike those who are forced into compact. We’re not alone that it is pretty much the Holy Grail of compact versatile milling machines. For starters, the footprint is quite small and this machine can live comfortably in a garage or. Switch from a vertical head milling machine to a true horizontal. “Mill-Drills” and “3-in-one” machines, Deckel FP-1 owners enjoy full-sized power in a compact rigid machine with super design and German crafted precision! If that isn’t enough, Deckel owners can. Quill feed and also saves your wrists from repetitive passes when. Miller in less than a minute, with a true supported horizontal arbor! The Deckel FP-1 also has strong, built in mechanical powerfeeds for the X and Z travel which give you powered drilling via the “knee”, in addition to the quick spring-loaded manual. Call or text (8O5)34O-OOOO. Thanks for taking the time to appreciate this item. The item “Deckel FP1 Mk2 Universal Milling Machine SN 30696 Early 1960′s” is in sale since Sunday, May 06, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “johntina2atjuno” and is located in Camarillo, California. This item can’t be shipped, the buyer must pick up the item.

• Featured Refinements: Deckel
• Bundle Listing: No
• Country/Region of Manufacture: Germany
• MPN: Does Not Apply
• Brand: Deckel
• Model: FP1 Mk2

Offered here is a Kearney & Trecker / Milwaukee Horizontal Milling Machine, Model 3-H, serial number 53-4048. The Mill has a #50 NMTB Taper Spindle, 20 – 1000 RPM Spindle Speeds, an assortment of tool holders, and a Universal Vertical Head Attachment. Please note: The drive gear for the vertical head has been misplaced and lost. It came out of service in good operating condition, and inspection is available by prior appointment. As a result of sitting in storage it could use a good cleaning, and aside from cosmetics it looks like a nice tool. The item “Kearney & Tracker #3H Horizontal Mill with Universal Vertical Head + Tooling” is in sale since Wednesday, December 06, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “611machines” and is located in Southampton, Pennsylvania. This item can be shipped to United States.

• Brand: Kearney & Trecker
• Model: 3H
• MPN: Does Not Apply

This is a Wells Model 645 Vertical Milling Machine, serial number 10100. It has a 9″ x 40″ Power Feed Table and an R-8 Spindle Nose. The motor data plate was a little difficult to read, it looks like a 1-1/2 H. This mill has an Index Universal Shaping Head mounted, and it is driven by a 1/2 H. The vise shown mounted on the table is included. This can be loaded on a truck at no cost. The item “Index #645 Vertical Mill with Power Feed Table and Universal Slotting Head” is in sale since Wednesday, November 08, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “611machines” and is located in Southampton, Pennsylvania. This item can be shipped to United States.

• Brand: Wells
• MPN: Does Not Apply
• Model: 645
• Country/Region of Manufacture: United States

Maho MH 600 milling machine. Really nice original condition. Comes with fixed table (not pictured), adjustable table, assorted tooling, and horizontal milling arm support (not pictured). If you want pictures of the fixed milling table or the horizontal arm, or anything else just let me know. I have a forklift and can load in your truck or trailer. The item “Maho MH 600 Universal Milling Machine Horizontal and Vertical Milling” is in sale since Sunday, April 22, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “markewa” and is located in Sandston, Virginia. This item can’t be shipped, the buyer must pick up the item.

• Brand: Maho
• Model: Maho MH 600