Runs good, 220/230V 3 Phase 1 HP motor. Step pulley machine, quiet head, low and high gear ranges work as they should, power down feed works as well. This has the smaller 9″ X 36″ table that is good for tight spaces. Comes with Bridgeport 6″ Vise, 12″ Rotary table made by John Stevens Co. USA, Jacobs drill chuck on R8 arbor, three new R8 collets (1/4, 3/8, 1/2) and some new USA made endmill cutters. Good running older machine, forklift on site to load suitable vehicle (weighs about 2300 lbs) Come see it run. If item is not paid within THREE days it will be relisted unless we are contacted. Items over 150 lbs. Please read the description carefully for any additional charges for packing, crating, storage, etc. Powered by SixBit’s eCommerce Solution. The item “Bridgeport J Head Milling Machine 1 HP 3 PH, W / Vise & 12 Rotary Table & More” is in sale since Wednesday, December 23, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “sottof” and is located in Long Beach, California. This item can’t be shipped, the buyer must pick up the item.

• Spindle Horsepower: 1 hp
• Country/Region of Manufacture: United States
• Machine Type: Vertical Milling Machine
• Power Source: Electric
• Spindle Taper: R8
• Brand: Bridgeport
• Voltage: 220V

Hardinge BB2V Vertical Milling Machine + Rare Collets + Very Rare Vise. Hate to have to part with this beefy little Hardinge mill but it’s been a tough year. She’s in good shape and comes with the following. New polyurethane spindle belt. A set of (very rare) Hardinge 2VB collets (sizes 1/16″, 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″). An original low-profile Hardinge swivel vise (not pictured). All parts needed to convert to lever feed on the X-axis (designed and made by me). The previous owner swapped the original motor over to a 120V motor. I had planned to put in a VFD and link it to the levers eventually, but never got around to it. Works fine as is, but adding a VFD would give you easier speed changes. The table working surface is 12″ x 3 3/16″. The travel of the table is 5″ (longitudinal) x 3 1/8″ (transverse) x 5 (vertical). The machine footprint is: 39″ x 38″ (allows cabinet door to open) x 60 tall. The item “Hardinge BB2V Vertical Milling Machine + Rare Collets + Very Rare Vise” is in sale since Thursday, December 10, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “hessehessehesse” and is located in Kalamazoo, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Brand: Hardinge
• Machine Type: Vertical Milling Machine
• Model Year: Unknown
• Function: Milling
• Power Source: Electric
• Spindle Horsepower: 1 hp
• Control: Manual

Table To Spindle Nose Distance Range. SERIAL # BR 97983. Motor: 1-HP – 220v / 3 phase. Step Pulley Speed Control. Collets & Attachments (see photo). 2.5″ – 18.25″. 0.75 – 35 IPM. 90 – 4200 RPM. 60″ x 60″ x 82 High. All information deemed accurate but may vary from model to model. For any questions you may have.. Google “Larry Razza” to see more information & videos of our equipment! L R Associates, Inc. Fast Application, its all filled in for you.. Online leasing applications get. Please Note: Not all machines may qualify for Leasing. We accept all Major Credit Cards, Bank Wires, Company and Personal Checks. We always get better rates. Just include the zip code when inquiring and if you have a loading dock or ground level with forklift. CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing. Unless otherwise specified, prices quoted are F. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user’s responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. The item “Bridgeport Milling Machine 1HP Sony DRO 6 Rotary Vise Chrome Ways Collets Feed” is in sale since Monday, September 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “palmtreespecialties” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Spindle Horsepower: 1 hp
• Country/Region of Manufacture: United States
• Machine Type: Milling Machine
• Power Source: Electric
• Function: Drilling
• Brand: Bridgeport
• Control: Manual
• Voltage: 220 V

Remanufactured Bridgeport Milling Machines with 42″ Table, Servo 150 X Axis Power Feed, Acu-Rite 2 Axis DRO, Kurt Vise, 48″ Table also available price adjusted accordingly. Highest Spindle Speed (RPM). For more than 60 years, the Bridgeport Series I Standard Mill – the original, all-purpose mill – has been the “real thing” in milling, drilling, and boring for metalworking shops throughout the world. Today, the Series I Standard continues to fulfill the industry’s need for an accurate, reliable, and versatile mill. The Series I Standard features an innovative airflow cooling design that uses no external fans to prolong bearing life and prevent expansion from heat build-up. A full range of accessories are available, including optional chrome-plated ways and gibs to ensure that the machine will last a lifetime. 18.75 (476 mm). 6.75 (171 mm). 42 x 9 (1245 x 299 mm). T Slot center distance. 0.625 (16 mm). Height Above Floor Max. 47.25 (1200 mm). Weight of Workpiece Max. 750 lb (340 kg). 3 hp (2.2 kW). 2 hp (1.5 kW). Power Quill Feed 3. 3/4 (19 mm) Mild Steel. 6 (152 mm) Mild Steel. 1.875 in (48 mm). 3.375 (86 mm). 60 – 500 rpm. 0.0015/rev (0.038 mm). 0.003″/rev (0.076 mm) 0.006″/rev (0.152 mm). 8.2 x 5.3 ft (2.5 x 1.6 m). 7.04 ft (2.15 m). Please Call: Guerrera Machine Co. Please feel free to call at any time Monday – Sunday 7:00am – 5:00pm EST. If we do not answer please kindly leave a detailed message. We will return all messages by the next. 2 HP Vari Speed Head. 1 Shot Lube System. Please call with any questions. We will assist you in any reasonable way to help get your items to your destination, All checks subject to bank verification. Please Call two zero three, five nine two, eight four zero two with any questions or concerns, Thank You! You are welcome to inspect any machine by appointment. Guerrera Machine Company, LLC. Will not be held liable for any inaccurate information. The item “Bridgeport Milling Machine with 42Table & 2hp Vari Speed Head, Kurt Vise, & DRO” is in sale since Monday, December 17, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “guerreramachinecompanyllc” and is located in Watertown, Connecticut. This item can be shipped to United States.

• MPN: Does Not Apply
• Brand: Bridgeport

Original Atlas 7B 7 Metal Shaper w/ Stand. This is a perfect running, and working Metal Shaper. Needs nothing but a new owner. I have used this machine for approximately 2 hours with no hesitation at all. I have cleaned, lubed, and serviced this machine. It does come with the original Atlas Book. No hidden flaws, just a good Atlas Metal Shaper. Thank you for looking at our Auctions! As we are listing parts Daily. We do our best to Accurately Describe our Parts, and take High Quality Photo’s of the Items we have for sale. We are available to help answer the questions to the best of our knowledge. The item “Atlas 7B 7 inch Metal Shaper with Stand Tool holder Vise Sears Craftsman Bench” is in sale since Saturday, October 10, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “vintagepartssuppliers” and is located in Central City, Nebraska. This item can be shipped to United States.

• Machine Type: Milling Machine
• Function: Shaper
• Brand: Atlas
• Control: Manual
• Voltage: 110 V

Bridgeport Milling Machine Step Pulley, 9″ x 42″ Table, Servo Power Feed, Vise. Bridgeport Milling Machine Step Pulley J Head. 9″ x 42″ Table. 1 HP X 3 Phase 230/460 volt. Can be seen under power, price includes loading onto your truck. We are proud to be a member of the MDNA. The item “Bridgeport Milling Machine Step Pulley, 9 x 42 Table, Servo Power Feed, Vise” is in sale since Wednesday, August 19, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machinetool_emporium” and is located in Louisville, Kentucky. This item can be shipped to United States.

WE USED IT AS A DRILL PRESS AND NEVER DID ANY MILLING WITH IT. INCLUDES R8 COLLET SET, HEAVY DUTY VISE AND CLAMP SET. HAS COUNTER ON IT ALSO. NEEDS A BATH BUT WORKS GOOD. DON’T NEED IT ANYMORE. CALL IF YOU WANT TO COME AND SEE IT. The item “BENCH TOP MILLING MACHINE, 208/220 VOLT WithR8 COLLETS, HD VISE AND CLAMPS SET” is in sale since Wednesday, July 29, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ankerjac” and is located in Santa Ana, California. This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: Taiwan
• Machine Type: Milling Machine
• Function: Drilling
• Control: Manual
• Voltage: 220 V

Clausing 8520 Vertical Milling Machine. Comes with Clausing swivel vise and a few other accessories, including has a collet set. Great addition to any personal workshop. Breaks down into smaller parts for easy transportation. Located in Mendota, IL 61342 (less than 2 hrs from Chicago). The item “Clausing 8520 Vertical Milling Machine With Swivel Base Vise & Accessories” is in sale since Wednesday, August 19, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “saladofgenes” and is located in Mendota, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Brand: Clausing
• Machine Type: Vertical Milling Machine
• Model: Clausing 8520
• Voltage: 115 V
• Function: Milling
• Country/Region of Manufacture: United States
• Spindle Taper: MT2
• Power Source: Electric
• Spindle Horsepower: 3/4 hp
• Control: Manual

This is a Bridgeport Knee Type Milling Machine and is a serial number BR 220761. It has a R8 spindle, 9″x48″ table and has a step pulley head with 16 spindle speeds from 67 to 2720 RPM’s. The head is 1 H. 230/460 volt 3-phase and we think it has chrome bed ways by the way it is flaked, but cannot confirm. It includes several nice accessories, a 6 Bridgeport Vise, worklight, one-shot lube system, collet rack and a inch/metric Acu-Rite II digital readout system. E b a y Stores And check out our website with over 300,000 items in stock! It is fully interactive and will show you current pricing and stock availability on thousands of items! Or register today & open an account to place orders, print statements, expedite orders and more! Also listed will be our toll free telephone and fax numbers for your convenience. Get your copy of our 450 page T&S Catalog, with listings of popular items from all the companies we represent. Direct Links to all our vendors which include some of the top names in the industry; Kennedy, OSG, Guhring, Clausing, Jet, Precision Twist-Dormer, Wilton, Norton, Starrett, Allied, Mitutoyo, YG-1 Keo, Brown & Sharpe and Jacobs, just to name a few! WE SPECIALIZE IN CUTTING TOOLS! Hundreds of decimal reamers, including over and under size metric reamers from 1mm to 20mm….. Hundreds of special taps from #000 to 4, endmills, toolholders, abrasives, fasteners, machinery and much more. Give us a call! The item “USED Bridgeport Milling Machine with Acu-Rite 2-Axis DRO, 6 Vise, Worklight” is in sale since Wednesday, March 18, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tstoolsupplycompany” and is located in Holland, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Model: Step Pulley
• Spindle Horsepower: 1 H.P.
• Machine Type: Milling Machine
• Table Length: 48″
• Power Source: Electric
• Spindle Taper: R8 Spindle
• Function: Drilling
• Brand: Bridgeport
• Table Width: 9″
• Control: Manual
• Voltage: 230/460 3-Phase

Atlas Model 7B Metal Shaper with Stand / Vise COMPLETE and WORKING. The item “Atlas Model 7B Metal Shaper with Stand / Vise COMPLETE and WORKING” is in sale since Wednesday, June 3, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rober3014″ and is located in Marshall, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas