This came about after having an end mill walk out of a collet and ruined. A part i was working on. I thought it was tight but with little to grip and. Hang onto it was hard to fully tighten. I looked around and could not find a. Tool to fit my needs. And at this time an er style chuck is not warranted.. Plus the cost on them is up there. So i made one up… And it works like a dream. So i made a few more up to offer to you who have been just as frustrated by. I also use this to align the gear train when shifting. Between speeds and high. What i’m offering is a spindle wrench that fits onto the spline drive shaft. For the import milling machines offered by enco… Enco 1525 “baby bridgeport”. Tightening the draw bar on these used to be a challenge. When using a collet to hold the cutter… But not anymore with this handy wrench. 8″ long and 1″ wide made of steel. Standard wrench 6 spline. 25, od is 1.14, id is. If you mill needs a different size wrench… Send me your id across the splines, od between them and width of spline. I’ll check the others i’ve have… I’m sure i have one that will fit your mill. The stamped washer on the draw bar may need to have the od trimmed down a tad to allow wrench. To freely be removed… At least it had to on mine. Remember there are those that “originate” and “them” that imitate and insinuate. So can you trust the words of a r&d man… That’s rip-off and duplicate. You know they have a town called usa in china… So they could put ” made in usa” on it. Everyone with a bench mill drill needs one – thanks. Good people to deal with great product. What a great idea!!! Thanks for a very useful part! Nice tool, nice packing, nice people to deal withaaaaa+++++++++++++++++++++++++++. Great e-bay asset ! Makes very nice items ! Accurately described and satisfactory in all respects. Item was exactly as shown; good quality; delivered promptly. Thank you for supporting those who have ingenuity to innovate..The item “NEW COLLET DRAWBAR SPINDLE WRENCH BENCH MILLING MACHINE” is in sale since Tuesday, December 23, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “northabees” and is located in Ashtabula, Ohio. This item can be shipped worldwide.

Hi you are looking at a power drawbar for a step pulley head import and bridgeport type milling machine. Jet, msc, atrump, wt tool, chevlair, enco, travers, supermax, and many more. The most simple and economical power drawbar out there. It works from air pressure 90 psi max. A hugh time and aggravation saver no lost time looking for your wrench or hammer. Main body made of 6061 aluminum, main front slide is made with steel rod and nylon bushing, for long life. One screw removes top part to give access to draw bar. Can be mounted in many positions around the head to fit your own preference. Comes assembled complete with impact wrench ready to mount on your mill and use. All parts made in our shop here at m&t machine , taylorsville n. 28681 usa except the impact wrench and fasteners. We developed this power drawbar in our shop beware there are inferior copies out there but get the original here. We have used this type power draw bar in our shop for more than 10 years with no problems. Their are copies out there please support our time spent on research and development you will not regret it {requires you drill three 1/4-20 holes in the top of your milling head to mount the power drawbar} installation instructions included. Thank you very much for looking.The item “BRIDGEPORT IMPORT MILLING MACHINE IMPACT WRENCH POWER FEED DRAWBAR STEP PULLEY” is in sale since Sunday, June 23, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “atd1962″ and is located in Taylorsville, North Carolina. This item can be shipped to North, South, or Latin America and to all countries in Europe and to Australia.

• Brand: M&T MACHINE
• Model: DB1000-SP
• MPN: DB1000-SP
• Country of Manufacture: United States

Hi you are looking at a power draw bar for a variable speed r8 collet import and bridgeport type milling machine. Jet, msc, atrump, wt tool, acra, acer, chevlair, enco, travers, supermax, and many more.

Can be mounted in many positions around the head to fit your own preference. Handle fully adjustable to fit your preference and to take up any wear that may take place over time. Comes assembled complete with impact wrench ready to mount on your mill and use. If your collet sticks in the spindle return the impact to the top and bring it down and strike the drawbar as you would with a hammer there is also a regulator built in the impact wrench to keep from over tightening the drawbar.. All of the main body is made and assembled in our shop here at m&t machine , taylorsville n.

We have used this type power draw bar in our shop for more than 10 years with no problems. Any questions call 828-632-1500 home.

The item “BRIDGEPORT MILLING MACHINE POWER FEED POWER DRAWBAR 3/8 IMPACT WRENCH” is in sale since Sunday, June 23, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “atd1962″ and is located in Taylorsville, North Carolina. This item can only be shipped to Australia.

• Country of Manufacture: United States
• Brand: M&T MACHINE
• Model: DB-1000VS
• MPN: DB-1000VS
• UPC: 0610708255963