Dividing Head Indexing Foot Rest Tail Stock. Please ask questions and specific size to be sure it fits your machine. Has a centerline of about 5″ to 6″. In very good condition. You can clean it up a bit to make it look nice.

Please view all pics carefully as they are part of the description.

See all pictures for the best description. Check out my other listings as well. Thank you for looking.

See all pictures for the best description. Check out my other listings as well. Thank you for looking.

USED, SMALL DIVIDING HEAD. I DO NOT KNOW WHO MADE IT. THE SPINDLE IS 1-1/8X16. IT COMES WITH AN ADAPTER FOR 1-1/2X8 ACCESSORIES. IT LOOKS LIKE A MOUNT EAR MIGHT HAVE BEEN BROKEN OFF THE BACK. THE DRIVE CENTER HAS A BRAZED CASTING ON IT. THERE ARE MEASUREMENTS IN THE PICTURES. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

Stantec Sales & Services is Offering the Following Equipment. Kearney and Trecker Horizontal / Vertical Dividing Head 9 3 Jaw Scroll Union MFG Chuck. All products are as is. I shall have no other obligation or liability, direct or indirect, of any kind, including liability for special, incidental, or consequential damages. This item is for sale locally and may end at any time.

Cnc Router-machine Rotary Indexer Table Indexing Head 5th Axis 4th Axis 6:1 8:1. This Is a New Cnc Rotary Table Axis Which Can Hold Various Types of Materials, and Can Be Carved with Wood, Olive Core, Plastic and Other Soft Materials. Fourth Axis Reduction Ratio. 8:1 (57 Two Phase 4 Wire 3a Stepper Motor). Fifth Axis Reduction Ratio. 6:1 (57 Two Phase 4-Wire 3a Stepper Motor). Not Easy to Oxidize, Not Easy to Rust. High Concentricity and High Conversion Rate. Precise Positioning and Stable Control. Wear Resistance, Long Service Life. Please Allow 1-3cm Differs Due to Manual Measurement. Due to the Different Display and Different Light, the Picture May Not Reflect the Actual Color of the Item. Thanks for Your Understanding.

USED, SMALL DIVIDING HEAD. I DO NOT KNOW WHO MADE IT. THE SPINDLE IS 1-1/8X16. IT COMES WITH AN ADAPTER FOR 1-1/2X8 ACCESSORIES. IT LOOKS LIKE A MOUNT EAR MIGHT HAVE BEEN BROKEN OFF THE BACK. THE DRIVE CENTER HAS A BRAZED CASTING ON IT. THERE ARE MEASUREMENTS IN THE PICTURES. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

6 / 160 mm Dividing Head for Milling Machine. MT3 Headstock Taper & Complete Set & Simple Operation. Semi-Universal Dividing Head is a simple Index Center and can be used for direct and indirect dividing. Complete the gear, face, flute processing, and no need accessories, the same construction as universal type. With rotary indexer, the 24 quick-dividing holes can complete BS-2A 2,3,4,6,8,12,24 division indexing. Attache 3 dividing plates and the dividing head indirect dividing in any division indexing 2-50.51-380. Rich Dividing Head Set. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Vertical & horizontal milling machine with headstock chuck for the lathe. Swing: 6-1/2″ / 168 mm, Center Height: 5″ / 128 mm. Our universal dividing head features ruggedly constructed hardened and ground worm gear. The reduction ratio is 1:40. Designed with a rotary table and indexing chuck for convenient operation, the 24 quick-dividing holes can complete 2, 3, 4, 6, 8, 12, 24 division indexing. The ball-bearing of this indexing head is of high precision and smooth turning. An extra dead center is provided for rapid use. Our rotary indexer comes with 3 dividing plates of different sizes. The tool has easy indexing of divisions from 2 to 50, with most numbers up to 380. The rotary indexer is ideal for various uses in milling, grinding, and drilling work. Chuck Diameter: 6 / 16 cm. Spindle Speed: 2500 RPM. Swing: 6-1/2 / 16.8 cm. Center Height: 5 / 12.8 cm. Reduction Ratio: 1:40. Net Weight: 77 lbs / 35 kg. Headstock Dimensions: 4.4″ x 7.9″ x 11.8 / 11.3 x 30.2 x 21.9 cm. Tailstock Dimensions: 4.5″ x 6.6″ x 5.2 / 11.5 x 17 x 13.4 cm. 1 x 6 Dividing Head. 2 x Dividing Plates. 3 x 6 Chuck Jaws. 1 x Dead Center. 1 x Set of Related Accessories. Adjustable Angle: The semi-universal dividing head features a 6 3-jaw chuck, Spindle Speed: 2500 RPM. The headstock is adjustable from the horizontal position to 90 degrees upward. Free 3 more jaws for 6 chuck. Solid Construction: This indexing head is made of HT 200 to be a long life. A rigid frame provides high accuracy with little backlash for a smooth rotation. Precise & Accurate: Dividing head milling machine with laser engraving scales. The 24 quick-dividing holes can complete 2, 3, 4, 6, 8, 12, 24 division indexing. One circle for 360 degrees, one scale stands for 1 degree. MT3 Tailstock Adjustable: Huge live center for heavy-duty workpieces. Ball-bearing precision; turns smoothly. The model of the tailstock is MT3. One extra dead center is included. Rich Dividing Head Set: 3 dividing head index plates are attached along with the dividing head for indirect dividing in any division indexing 2-50, 51-380 except prime numbers and specific other numbers. People Who Bought This Item Also Bought. VEVOR BS-0 Semi 5 Indexing Dividing Head 3-Jaw Chuck Tailstock For CNC Milling. VEVOR Compound Milling Machine Work Table 2 Axis Cross Slide Bench Drill Vise. VEVOR 8 Precision Horizontal and Vertical Rotary Table. Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate. VEVOR Tilting Milling Table Tilting Angle Milling Machine Adjustable Plate. VEVOR Rotary Table XY Axis Rotary Table 8 3-Slot for Milling Drilling. VEVOR 6 Rotary Table Horizontal Vertical Dividing Plates for Milling Machine. VEVOR Square Air Cooled Spindle Motor 2.2KW CNC Spindle Motor 220V ER20 Collet. VEVOR Milling Drilling Machine Worktable Cross Slide Table 4″ X 7.3″ Bench Table. VEVOR 2.2KW Air Cooled Spindle Motor for CNC Router Milling Engraving 4 Bearings. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. 4 / 100 mm. 6 / 160 mm. 0.28 / 7 mm. 0.83 / 21 mm. 6.5 / 168 mm. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours.

VEVOR BS-0 Semi 5 Indexing Dividing Head 3-Jaw Chuck Tailstock For CNC Milling – YouTube. BS-0 Precision Dividing Head. MT2 Headstock Taper & Complete Set & Simple Operation. The indexing head doesn’t only look great but allows you to do more with your milling machine: measuring specific angles and dividing a circle into equidistant arcs. It comes with 3 interchangeable indexing plates and a tailstock to ensure more precise and stable work. It will be your perfect assistant to machine the flutes of a milling cutter, cut the teeth of a gear, curved mill slots, or drill a bolt hole circle around the circumference of a part. Solid Cast Iron Construction. High Precision Indexing Plate. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Rigid & Sturdy Body. The indexing head features a long service life due to its rigid quality. It is designed with a mirror finish that is wear. The dividing head is enabled to tilt from 10 degrees below horizontal to 90 degrees vertical. And that will be convenient if you want to cut the part from a certain angle. By turning the 1st level that extrudes the pin, the pin goes into the plate and you can divide the full circle into 2, 3, 4, 6, 8, 12, or 24 divisions. The other level prevents the spindle from vibrating during machining. The high precision performance of the indexing head is achieved with indirect indexing plates A, B, and C. All divisions 2-50 can be done, but some from 51 to 380 cannot be obtained. Check the manual before setting. The MT2 tailstock gives strong support to the workpiece being machined. It is particularly useful when the workpiece is relatively long and slender. The rotary indexer is used on the tables of milling machines and other machine tools including drill presses, grinders, and boring machines. Swing: 6-1/2 (16.5 cm). Center Height: 3-15/16 (10 cm). Net Weight: 50.7 lbs (23 kg). Headstock Dimensions: 9.5″ x 7.5″ x 6.5 (24 x 19 x 16.5 cm). Tailstock Dimensions: 3.5″ x 6″ x 4 (9 x 15 x 10 cm). 1 x Dividing Head. 3 x Dividing Plates. 1 x 125 mm 3-Jaw Chuck. Solid Cast Iron Construction: Swing: 6-1/2/168 mm. The dividing head features a rigid mirror finish that is wear-resistant, a good choice for long-term use. Its delicate parts work perfectly, mathematically dividing the materials to be cut. Easy of Adjustment: The headstock of the dividing head for the milling machine can tilt from 10 degrees below horizontal to 90 degrees vertical so that you can handle the stuff of different sizes by changing its angle. High Precision Indexing Plate: The universal dividing head comes with a direct indexing plate and an interchangeable one on the head, and two replacement interchangeable ones with different numbers of holes. It’s the dividing plates that set the precise distance between cuttings. Strong Workpiece Support: The coming package also includes a tailstock that will give strong support to the long metal stick you are going to deal with, providing a more stable working condition. Versatile Application: The rotary indexer is used on the tables of milling machines and other machine tools, including drill presses, grinders, and boring machines. People Who Bought This Item Also Bought. VEVOR Compound Milling Machine Work Table 2 Axis Cross Slide Bench Drill Vise. VEVOR Milling Drilling Machine Worktable Cross Slide Table 4″ X 7.3″ Bench Table. Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate. VEVOR Tilting Milling Table Tilting Angle Milling Machine Adjustable Plate. VEVOR 8 Precision Horizontal and Vertical Rotary Table. VEVOR Indexing Dividing Head 6 3 Jaw Chuck & Tailstock for CNC Milling Machine. VEVOR Rotary Table XY Axis Rotary Table 8 3-Slot for Milling Drilling. VEVOR 6 Rotary Table Horizontal Vertical Dividing Plates for Milling Machine. AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport. VEVOR Square Air Cooled Spindle Motor 2.2KW CNC Spindle Motor 220V ER20 Collet. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. It is designed with a mirror finish that is wear-resistant and tear-resistant and looks low-profile. And that will be convenient if youwant to cut the part from a certain angle. The high precision performance of the indexinghead is achieved with indirect indexing plates A, B, and C. Alldivisions 2-50 can be done, but some from 51 to 380 cannot be obtained. The rotary indexer is used on the tables of millingmachines and other machine tools including drill presses, grinders, andboring machines. 6 / 160 mm. 4 / 100 mm. 0.28 / 7 mm. 6.5 / 168 mm. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours.