For sale is a used Bridgeport Tail Stock, which needs an adjustable height gear screw and locking set screw. A little dirty and has some paint chipping. Previous owner must have tried to move it while it was locked in place. There is nothing wrong with the rack gear, its in good shape, the dead center moves back and forth smoothly… You will just have to replace the adjustable height gear screw and it’ll be ready to go. Measures approx 8 from base to center. Please view all pics as they are part of the description. I try to describe most of the items to the best of my ability, there are times when hubby inserts info onto a Post-It-Note that you will see in the pics. Please view all pics, as they are part of the description, this also applies to my “odds & ends” and “Lot of” items, as it is too time-consuming to describe each and every item. As long as I can package the tools safely, I’ll combine everything as cost-effective as possible. Please do NOT pay me until I send you a combined invoice (if applicable). We don’t go to the post office daily!

As shown in pictures. From base to center point of dead center is 2 1/2. Guides on bottom are 1/2″ x 5/8″. T nut is 7/8″ square x 1/4″ thick.

HAAS HTS6 TAIL STOCK.

I have and I don’t know why I do but about 20 or so tailstocks UGH! This a picture of some of them not all of them and I have lots of other parts to SO JUST ASK! So my plan is that you want one and you not wasting my time. Hopefully you have a picture of what you looking for or sizes and you say Peter I need this do you have it? I go out and check and DAM I have it and charge you a crazy over priced dollar amount and you pay it with out question. I become rich and never ever touch a heavy piece of metal again! If you have gotten this far and don’t get it well.. PLEASE ASK ANY QUESTIONS YOU MIGHT HAVE. I JUST WANT EVERYONE TO BE HAPPY! And HAVE with NO PROBLEMS! If it has gotten to bad I toss it like the 12 atlas tail stocks and the 3 milk crates of collets and all the other stuff. But I think and it is just me if everyone is on the same table it is all fair. No I do not have a chuck key. PLEASE SEE MY OTHER AUCTIONS! I stuff to get rid of! However I do not view “Best Offer” as an offer of 40 to 60 percent less then.. I can not do 30 or 60 days to be honest it doesn’t make sense to me. Ding or mark on everything. If I can not then I must take pictures of everything. I will extend to you the following as my father did. I believe this is far to all of us if you have concerns please drop me a note. I promise you it will get there safe and sound. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machinerynj” and is located in this country: US. This item can be shipped to United States.

BS-0 Semi Universal Dividing Head Spindle Tail Stock Milling Mill Set. Dividing Head & Tail stock. Spindle (head stock) Taper. Threads on back plate. 1-1/2 x 8 TPI. Head stock swivels to all angles. Direct mounted index plate has24 divisions. Can be easily Adjusted to any angle between 10 downward to 90 degrees upward from a horizontal position. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dbmimports” and is located in this country: US. This item can be shipped to United States.

• Machine Type: Milling Machine
• Function: Milling
• Brand: Unbranded

BRIDGEPORT “M”-HEAD MOUNT DOVE TAIL V-RAM MOUNT M HEAD ON BACK OF “V” RAM. BOLT CIRCLE 3-3/4″ CENTER HUB 2.00″. The item “BRIDGEPORT M-HEAD MOUNT DOVE TAIL V-RAM” is in sale since Thursday, September 3, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mmtoolmfg” and is located in Highland, New York. This item can be shipped to United States.

• Brand: Bridgeport

STRONG IN CONSTRUCTION – Swing: 6-1/2/168 mm. The dividing head features a rigid mirror finish that is wear-resistant, a good choice for long time use. Its delicate parts together work perfectly, mathematically dividing the materials to be cut. EASE OF ADJUSTMENT – The headstock of the dividing head for milling machine can tilt from 10° below horizontal to 90° vertical so that you can handle the stuff of different sizes by changing its angle. WITH HIGH PRECISION – The universal dividing head comes with a direct indexing plate and an interchangeable one which is on the head, and two replacement interchangeable ones with different numbers of holes on them. It’s the dividing plates that set the precise distance between cuttings. STRONG WORKPIECE SUPPORT – The coming package also includes a tailstock which will give strong support to the long metal stick you are gonna deal with, providing a more stable working condition. WIDE APPLICATION – The rotary indexer is used on the tables of milling machines and other machine tools including drill presses, grinders, and boring machines. Rigid & Durable Body. The indexing head features a long service life due to its rigid quality. It is designed with a mirror finish that resists wear and tear and looks low-profile. The dividing head is enabled to tilt from 10° below horizontal to 90° vertical. And that will be convenient if you want to cut the part from a certain angle. By turning the 1st level that extrudes the pin, the pin goes into the plate and you can divide the full circle into 2, 3, 4, 6, 8, 12, or 24 divisions. The other level prevents the spindle from vibrating during machining. The high precision performance of the indexing head is achieved with indirect indexing plates A, B, and C. All divisions 2-50 can be done, but some from 51 to 380 cannot be obtained. Check the manual before setting. The MT2 tailstock gives strong support to the workpiece being machined. It is particularly useful when the workpiece is relatively long and slender. The rotary indexer is used on the tables of milling machines and other machine tools including drill presses, grinders, and boring machines. BS-0 Precision Dividing Head. The indexing head doesn’t only look great, but allow you to do more with your milling machine: measuring specific angles and dividing a circle into equidistant arcs. It comes with 3 interchangeable indexing plates and a tailstock to ensure more precise and stable work. It will be your perfect assistant to machine the flutes of a milling cutter, cut the teeth of a gear, mill curved slots, or drill a bolt hole circle around the circumference of a part. Weight: 23 kg (50.7 lbs). Package Dimensions: 410235205 mm (1698 in). 1 X Dividing Head. 3 X Dividing Plates. 1 X 125 mm 3-Jaw Chuck. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “BS-0 Semi-universal Quick Dividing Indexing Head With Tail Stock For CNC Milling” is in sale since Monday, November 26, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “beautysupplyworld” and is located in Perth Amboy, New Jersey. This item can be shipped worldwide.

• Brand: VEVOR
• MPN: FRCXZ001
• Model: BS-0
• Swing: 6-1/2″
• Center Height: 3-15/16″
• Headstock Taper: 7 B&S
• Weight: 23kg (50.7lbs)
• Dividing Plates: 3 pcs

Victoria 5″ Universal Dividing Head With Tail Stock Fully Working Includes VAT, 5″ Centre Height, 5 Chuck. We try our best to dispatch same day. Some items are collection only as we deem they could be easily damaged in transit. The item “Victoria 5 Universal Dividing Head With Tail Stock Fully Working Includes VAT” is in sale since Monday, June 3, 2019. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “toolz4youltd” and is located in Castleford. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahrain, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Qatar, Trinidad and tobago, Uruguay.

Has three hole plates and tail stock. The item “L & W 6-1/2 SWING DIVIDING HEAD + Tail STOCK, 3 PLATES 1-1/2-8 THREAD” is in sale since Tuesday, April 10, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “cabin-still” and is located in Salisbury, North Carolina. This item can be shipped to United States.

• Brand: L & W
• MPN: Does Not Apply

Here is a Bridgeport Dividing Head Indexer Tail Stock. The center height is adjustable from 7-7/8″ to 8-9/16″. It has 5/8″ keyways in the 5″ x 6-3/8 base. The paint is chipping but everything moves and turns smoothly. Check the pictures for condition as the items we sell are used and may have marks or blemishes. Check out the other items in our store at LnL Deals. The item “Bridgeport Dividing Head Indexer Tail Stock Machinist Tool” is in sale since Tuesday, November 20, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “lbkos14mvy” and is located in Elizabethtown, Pennsylvania. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Bridgeport