1996 FADAL VMC 3016 High Torque Vertical CNC Mill Machine Center. 22.5 HP Spindle Motor. High Performance Axis Motors. Standard 10,000 rpm Spindle. 21 Station Automatic Tool Changer. Two Speed Gearless Drive System. Spindle Nose to Table. Spindle Center to Column. 22.5 HP – Peak. (x, y)700 ipm, (z) 600 ipm. Maximum Cutting Feed Rate. 0.01 – 250 ipm. 220 V, 3 Phase, 60 KW. Floor space (lenght x depth). 230 VAC, 3 Phase. Specifications subject to verification. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Listed on every item are the directions and information needed to do so. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 80″ x 100″ x 105H. MACHINE WEIGHT: 8600 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. We reserve the right to end a listing early if the item sells through another outlet. All specifications and description of said goods are approximate only. MACHINE USE AND SAFETY. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability, quality, and we back our equipment with a thirty day return privilege to assure your satisfaction. Our address is 20933 Plummer Street Chatsworth, CA 91311. DIRECT CAPITAL provides equipment financing for our customers. For both new and used equipment. The item “FADAL VMC 3016 HIGH TORQUE CNC Vertical Mill, 4th Axis Ready, Rigid Tapping” is in sale since Monday, October 10, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Fadal
• Model: VMC 3016HT
• Country/Region of Manufacture: United States

In good working shape. The item “Kira KV-3MC CNC milling machine” is in sale since Tuesday, October 11, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “doberman1943″ and is located in Valley Village, California. This item can’t be shipped, the buyer must pick up the item.

24 Horizontal / Vertical Milling Machine. With the adjustable cutterhead and the movable ram, this Van Norman milling machine permits conventional horizontal, vertical, or angular milling, all in one machine. Finger-tip front and rear control of all power feeds simplifies operation. Feed and speed selectors are conveniently located for quick, easy selection. Permits maximum cuts over the entire ram range. Spindle transmission gears are made of hardened alloy steel. This milling machine is in good working and running condition. Center Distance – Y-Slots. Center T-Slot to Face of Column. Hole Thru Spindle – Diameter. Longitudinal / Cross Feed Rates, 12. Vertical Feed Rates, 12. Rapid Traverse Rate, Longitudinal / Cross. Rapid Traverse Rate, Vertical. Specifications subject to verification. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Listed on every item are the directions and information needed to do so. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 98″ x 81″ x 83H. MACHINE WEIGHT: 4300 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. We reserve the right to end a listing early if the item sells through another outlet. All specifications and description of said goods are approximate only. MACHINE USE AND SAFETY. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability, quality, and we back our equipment with a thirty day return privilege to assure your satisfaction. Our address is 20933 Plummer Street Chatsworth, CA 91311. DIRECT CAPITAL provides equipment financing for our customers. For both new and used equipment. The item “VAN NORMAN No. 24 HORIZONTAL / VERTICAL MILL 12×50 Table Milling Machine” is in sale since Friday, October 07, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: VanNorman
• Country//Region of Manufacture: United States
• Model: 24
• Country/Region of Manufacture: United States

This sale is for a 1998 Acra DMB3V CNC bed mill in good mechanical condition. This machine has been prepared for retrofit. The spindle motor with variable frequency drive are still installed. The axis motors, drives and control have been removed. This machine would be a perfect candidate for a PC retrofit like mach 3 or EMC. Travels 32″20″20. Spindle speeds 65-5000rpm AC drive. We would be happy to load onto buyers transport free of charge. The item “Acra Cnc Bed Mill Fryer Bridgeport Milling Machine Mach 3 Retrofit” is in sale since Wednesday, October 05, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “amsindsales” and is located in Rolla, Missouri. This item can be shipped to United States.

Up for sale is the listing shown in the title. You will receive the exact machine shown in the picture. It has 1 1/2 HP, with a 32 table, and runs good! Which we can help you with. Do t hesitate to co ya t me with any questions, thank you. The item “Bridgeport Milling Machine 1 1/2 HP motor With 32 Table” is in sale since Thursday, October 06, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mattpokerpro7750″ and is located in Plainville, Connecticut. This item can be shipped to United States.

• Brand: Bridgeport

72 WEBSTER BENNETT EM VERTICAL BORING MILL. MINIMUM HEIGHT UNDER CROSS RAIL………………….. MAXIMUM HEIGHT UNDER CROSS RAIL………………….. DIAMETER OF SPINDLE BORE………………………… DISTANCE FROM CHUCK CENTRE TO JUNCTION FACE……….. DISTANCE FROM CHUCK CENTRE TO FRONT OF CROSS SLIDE…. 3.8 – 83 RPM. TOTAL WORKING HEIGHT REQUIRED……………………. 2-AXIS MITUTOYO KS DIGITAL READOUT SYSTEM. 1 SET (4) STANDARD HEIGHT CHUCK JAWS. 1 SET (4) 12 EXTRA-TALL CHUCK JAWS. 4 SUPER HEAVY DUTY 24 BORING BARS. The item “72 WEBSTER BENNETT EM VERTICAL BORING MILL” is in sale since Saturday, October 08, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “pdogos” and is located in Barberton, Ohio. This item can’t be shipped, the buyer must pick up the item.

HERE WE HAVE A NEW. 9 X 49 TABLE. VARIALBE SPEED KNEE MILL. Table Size 9″ x 49″. T-Slots 5/8 x 3. With Power feed 33. Vertical Knee Travel 16. Quill Feeds Per Rev 0.0015 -0.003 – 0.006. Net Weight 2,500 lbs. The last picture of the machine is where the box for DRO and tooling will be. We have partnered with Direct Capital. To help you get the machines you need. Only takes a few minutes to get approval. I HAVE OVER 1000 ITEMS IN MY E BAY STORE. IF YOU CAN NOT FIND WHAT YOU WANT. JUST ASK, Visit store: G and G MACHINERY. WE WELCOME INSPECTIONS AND CUSTOMER PICK UPS. WE ACCEPT ALL MAJOR CREDIT CARDS!! I offer an exclusive thirty-day return privilege. G&G Machinery has no further obligations to the item. Option to repair is at dealer’s discretion. All third-party charges are not refundable. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Sellers: Get your own map of past buyers. Sellers: Add a FREE map to your listings. The item “NEW, 9 x 49, ACRA # BPV-2VC MILLING MACHINE, POWER FEED, DRO, FREE SHIPPING” is in sale since Wednesday, May 04, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “ggmachine” and is located in Pinellas Park, Florida. This item can be shipped to United States.

• Brand: Acra
• MPN: 9X49
• Country/Region of Manufacture: Taiwan
• Model: BPV-2VC
• Country of Manufacture: Taiwan, Province of China

Techno-Isel DaVinci Drilling & Milling Machine CNC Mill/Router w/ Computer. This machine is in excellent condition. I have tested it to the best of my ability and everything seem to work. This was removed from a local school and saw very little use. The computer is a Toshiba Tecra A9 Laptop and has “Techno Isel GCODE Interface v3.02″ software for “DaVinci / C-Series”. I have run it through several modes and it moved to all of the different positions very smoothly. I do not know how to use it any further and I cannot guarantee that you won’t need to update the software/computer program before using. This includes the Kress 800 FME Milling Motor as seen in photos. It works perfectly as well. The weight of the entire router assembly without the computer is just over 100 lbs. If you have any issue with the item you receive, I politely ask that you message me Before Leaving FeedBack so we can resolve it. We can resolve most any problem easily. Additional charges WILL apply to AK & HI. If it is not pictured or described, please do not assume it is included; because it likely will not be. The item(s) in the picture(s) is/are exactly the item(s) you will be receiving. The item “Techno-Isel DaVinci Drilling & Milling Machine CNC Mill/Router with Computer” is in sale since Saturday, September 10, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “longviewdmw” and is located in Texas. This item can be shipped to United States.

• Brand: Isel Automation
• MPN: Unknown
• Model: DaVinci
• Country/Region of Manufacture: Germany

I plugged it in and it works. The feed also works. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I tried to take photos of the parts that came with it. PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. The item “MACHINIST TOOL LATHE Machinist Atlas 7B Shaper Machine” is in sale since Monday, September 26, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “gigigirl111″ and is located in Morris Plains, New Jersey. This item can’t be shipped, the buyer must pick up the item.

14x8x8.5in working envelope. I’d guess it has less than 500hrs on it. This machine was built by the orignal founder of Fadal and is often referred to as a baby Fadel. More info can be found here. The item “Fadec UMC-10 CNC Milling machine” is in sale since Thursday, September 29, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “impyman18″ and is located in San Antonio, Texas. This item can’t be shipped, the buyer must pick up the item.