With Electric Motor for Head Positioning, No more cranking the head up and down by hand! And X Axis Table Power Feed Included – BE SURE TO NOTICE THESE WHEN YOU COMPARE, OTHERS DO NOT HAVE THESE FEATURES. THIS LISTING COMES WITH A SHEET METAL CHIP TRAY BUT THERE IS NO STAND. IF YOU ARE LOOKING FOR A STAND PLEASE SEE OUR OTHER LISTINGS. Here are some features of this milling machine. Quill Depth DRO, R8 Spindle Taper. Different packages available to meet user’s. Class 5 high precision spindle bearings. Generous table size and travel in a compact machine. Solid Dovetail Way Column for high rigidity and precise up and down. Easy speed changes, no need to open any covers and change belts. Just stop, flip a lever, and go. Very Solid cast iron head and body make deeper cuts no problem. Head tilts 90 degrees left and right for angled cutting. Oil Filled gearbox in head for long life. Ears in head for long life. Adjustable tapered gibs and backlash to keep the machine tight and. So with this machine, you will receive. Z Axis / Head Electric Motor for head positioning. X Axis Table Power Feed. Quill DRO is built in. Sheet Metal Chip Tray (NO STAND IN THIS LISTING). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table T-Slot Size and Number. Table Travel, X Axis. Normal Working Max Height: (top of column travel motor). Height with head all the way up: (top of main motor) 57-1/2. Cross Travel, Y Axis. Distance Spindle to Table. With 7/16-20 drawbar thread U. Side To Side, 90 Degrees. Some other similar machines will say. That they are 2HP, but its the SAME exact motor as this one, just rounded. Up to 2hp and marked that way, we prefer to be honest and mark it as. What it really is, which is 1.5HP. More than enough power for. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-932M 9×32 VERTICAL MILLING MACHINE R8 SPINDLE X-AXIS POWER FEED 3YR WARRANTY” is in sale since Wednesday, November 15, 2017. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Make: Precision Matthews
• Model: PM-932M & PM-932M-CHIPTRAY
• Type: Manual, Vertical
• Model Year: 2017
• X-Axis Travel Bed: 21” – 25”
• Y-Axis Travel Bed: Less than 10”
• Z-Axis Travel Bed: 16” – 20”
• Highest Spindle Speed (RPM): 1501 – 2000
• Spindle Horsepower: 1.5

X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage: 110 V, 60 Hz. Rotate speed: 0-200 rpm. Length: 33 cm (13 inch). Width: 20 cm (7.9 inch). Height: 18 cm (7 inch). Gross weight: 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. Sign up to newsletter. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “Power Feed X-Axis 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM” is in sale since Thursday, August 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “rumei-shopping” and is located in Ontario, California. This item can be shipped to United States, all countries in Europe, Australia.

• Brand: VEVOR
• MPN: ZCXZG0085
• Bundle Listing: Yes
• Model: AS-250-150
• Country/Region of Manufacture: CHINA
• RPM: 0~200
• TORQUE: 150LBS
• Type: X-axis
• VOLTAGE: 110 V, 60 Hz
• Gross weight: 6.5 kg(14.3 lb

SHIZUOKA ST-N Vertical CNC Knee Mill. With Hasbach Bandit Control. The Shizuoka ST-N mill was manufactured by the Shizuoka Machine Tool Company whose origin can be traced back to 1877. The Hasbach Company’s CNC specialist completed the mill with a Bandit control to the same high standards as Shizuoka using the finest locally manufactured components. The Bandit control, one of the first CNC controls on the market, is still one of the most economical and easiest to use controls. This Shizuoka-Bandit machining center features feeds and speeds under NC control, contouring, a 3 HP husky spindle, and the versatile programming allowed by the CNC microprocessor. A heavy duty mill for those tough materials. Central “one-shot” lube system. Linear and Circular Interpolation. Table Length on Saddle. Saddle Width on Knee. Knee Height on Column. 80 – 3800 rpm. 220/440 Volt, 60 Hz, 3 Phase. Specifications subject to verification. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 50″ x 60″ x 80H. MACHINE WEIGHT: 3,000 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. The item “SHIZUOKA ST-N VERTICAL CNC 27 x 15 KNEE MILL with BANDIT Control, Tool Holders” is in sale since Wednesday, September 20, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Shizuoka
• Country/Region of Manufacture: Japan
• Model: ST-N
• Mach No.: 8591

Used Bridgeport series II milling machine. The digital readout shown in the 1 pic is not included. The mill was in service until June 2016. It runs good, but does have some issues. After closing the company, I relocated the machine to another shop for storage. The machine is currently not under power, but could be if needed. I will do my best to answer any questions that you may have. Loading details to be negotiated. The item “Bridgeport Milling Machine Series Il Vertical 4 Hp” is in sale since Wednesday, September 20, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “drummerhead1″ and is located in Waynesburg, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport

General Info: Stock #: CL-171146 Location: Stone Mountain, GA Brand: Bridgeport Model: EZ-Trak Series 1 Serial #: EZ1-BMI-5204 Approx. 006 IPR Variable Spindle Speed Range: 60 – 4200 RPM Spindle Taper: R-8 Motor HP: 2 Electrical: 230V/3PH Equipped With: EZ TRAK 2-Axis CNC Control w/ 3-Axis DRO, Variable Speed Head, Bijur Automatic Lubrication System, Dovetail-Type Chrome Ways Additional Info: The CNC mill is in working condition. Below is a video of it in operation. We are glad to show under power. Video will open in a new window. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Purchaser shall pay The Equipment Hub a late penalty on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. The item “Bridgeport EZ-Trak Series 1 9 x 48 CNC Milling Machine” is in sale since Friday, October 27, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “equipmenthub” and is located in Stone Mountain, Georgia. This item can be shipped to United States.

This air operated power draw bar comes complete with a 3/4 socket. It uses your stock milling machine drawbar, and if your drawbar is not a 3/4 inch DB, you can use any size socket you desire, the butterfly impact is a 3/8 in model. This power drawbar will fit Bridgeport and most other import. Also included is a pressure regulator unit, you simply bolt the power draw bar to the top of your mill using two 1/4-20 bolts, and connect the air supply, the regulator is preset to 90 psi, and believe me its more than enough pressure to do the job. You will LOVE this product! Please note: This will not fit the Bridgeport J head machines, see my other listings for J head power drawbars…… There are 12 mounting holes, drilled on a 4.35 inch bolt hole circle. If you have a Bridgeport clone or other milling machine, measure your mounting holes to determine.. If this product will fit your mill. If your holes do not line up, this product can still work if YOU are willing to locate, drill and tap 2 mounting holes. Measure and be sure, thanks…… The item “Power Draw Bar for Bridgeport & Import mills” is in sale since Wednesday, July 23, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “karlcustommachineworks” and is located in Redding, California. This item can be shipped to United States.

• Brand: n/a
• MPN: Does Not Apply

CHILDS “0000″ HORIZONTAL MILLING MACHINE. Nice working Childs mini horizontal mill in very good condition. Have not done any intense restoration, just oiled and made sure all moving parts unfrozen. This unit weights about 250lbs. Good somewhat “rare” complete machine. The item “CHILDS 0000 HORIZONTAL MILL” is in sale since Wednesday, November 08, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “dsharon7872″ and is located in Rush, New York. This item can be shipped to United States.

• Brand: CHILDS
• Model: 0000
• Country/Region of Manufacture: United States

Used Bridgeport milling machine, works good. The item “Bridgeport milling machine” is in sale since Saturday, November 25, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “bojet2011″ and is located in Saint Charles, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport