Sign up to Newsletters. Brand New AL-310S X-Axis Power Feed Kit For Milling Machine. Our Brand New AL-310S X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). To stop jog operating, you must first turn FEED KNOB to 0(OFF) position. Then move JOG SWITCH to FEED position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Brand new power feed. X traverse (left-right travel). Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Rotate speed: 0-200 RPM. Max torque: 450 in-lb. Max feed rate: 650mm/min. Max return speed: 850mm/min. Dimension: 8 x 4.5 x 13 inches. Package size: 11.8 x 8.7 x 13.8 inches. Gross weight: 16.5 lbs. 1 x Power Feed For Milling Machine. 8 x Adjustable Pad. 2 x Tiavel Stop Assembly. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “ALSGS Power Feed for Vertical Milling Machine 110V X Y Axis AL-310SX In USA” is in sale since Wednesday, October 18, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “popularitemstore” and is located in Ontario, California. This item can be shipped to United States, Canada, Germany.

• Brand: Vevor Gewindebohren
• MPN: ZY8LX00363
• Bundle Listing: Yes
• Model: AL-310S
• Country/Region of Manufacture: CHINA
• Voltage: 110V, 50/60Hz
• Rotate speed: 0-200 RPM
• Max torque: 450 in-lb
• Max feed rate: 650mm/min
• Max return speed: 850mm/min
• Dimension: 8 x 4.5 x 13 inches
• Gross weight: 16.5 lbs

VERTICAL BENCH TOP MILLING MACHINE w/ 3 AXIS DRO INSTALLED. Brand new vertical bench type milling machine with chip tray as shown in the picture. Belt drive ensures smooth and quiet operation. Its wide mounting surface is much larger than other models in similar size range. Simple operation and powerful, this machine combines multiple functions in one and owns better price performance. High precision chuck for larger range of application. High accuracy fine tuning with. Processing precision of less than 0.05mm (0.002). T shaped slot, best for fixing tools such as flat tongs, outlet relief makes cleaning after drilling and milling work much more easier. High precision alloy drilling bit with super intensity. Able to cut various materials. At the same time, its fine workmanship enables. Smooth drilling and cutting. Wide range protection cover keeps away splash in drilling work. Up-to-date induction motor owns advanced over-load and over-heat protection function. Chain wire eliminates the risks when touches with saw bit during work. Guide rail with high precision scaleplate and pointer matches up with your strict demands. Double scale measure gauge with rotatable calliper and cant design, suitable for high precision cutting with complex angles. Practical tool for drilling and milling of metal and wood. Also fits for mould processing. Suitable for all kinds of skilled craftsmen and hobbyists with strong power. Smooth and quiet operation. Strong motor power of 850W. Practical machine, combines multiple functions in one. Advanced over-load and over-heat protection. Suitable for all kinds of skilled craftsmen and hobbyists. Table Size: 500 180 mm. X Axis Travel: 300 mm 11-4/5. Y Axis Travel: 180 mm 7.1. Z Axis Travel: 280 mm 11. T Slot: 12 mm 1/2. Rotary Speed: 50-2250 RPM. Spindle Travel: 50 mm 2. Facing Cut Diameter: 65 mm 2.6. End Cut Diameter: 20 mm 3/4. Drilling Diameter: 25 mm 1/2. Clamping Shank Diameter: 25 mm 1/2. Gross Weight: 136 kg (300 lbs). Package Dimensions (L W H): 72 64 95 cm 28-3/10. 1 X Grating Digital Readout Instrument. 1 X Accessory Case. 4 X Hand Wheels. 5 X Allen Wrenches. 3 X Hex Wrenches. 1 X Drill Chuck Wrench. 1 X Oil Can. 1 X Power Cord. 1 X User Manual. Sign up to newsletter. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “Bench Milling/Drilling Machine 19.7x 7.1 Milling Machine Drilling Benchtop” is in sale since Wednesday, May 9, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “yufann8_6″ and is located in Ontario, California. This item can be shipped to United States, Canada, Germany.

• Brand: VEVOR
• MPN: g78740031251506587387
• Power: 230V
• Wattage: 850W
• Table Size: 500x 180 mm (19.7aaaaaax 7.1aaaaaa)
• X Axis Travel: 300 mm (11-4/5aaaaaa)
• Y Axis Travel: 180 mm (7.1aaaaaa)
• Z Axis Travel: 280 mm (11aaaaaa)
• T Slot: 12 mm (1/2aaaaaa)
• Spindle Taper: MT3
• Rotary Speed: 50-2250 RPM eeeeee10%, infinitely variable
• Spindle Angle: 90jjjjjj left and right
• Spindle Travel: 50 mm (2aaaaaa)
• Max. Facing Cut Diameter: 65 mm (2.6aaaaaa)
• Max. End Cut Diameter: 20 mm (3/4aaaaaa)
• Max. Drilling Diameter: 25 mm (1/2aaaaaa)
• Clamping Shank Diameter: 25 mm (1/2aaaaaa)
• Gross Weight: 136 kg (300 lbs)
• Package Dimensions: 72x 64x 95 cm (28-3/10aaaaaax 25-1/5aaaaaax 37-2/5aaaaaa)

Grizzly Mill/Drill with Stand and DRO. This item is brand new in factory packaging and covered by our. This great little machine sports some of the same features found on much larger mill/drills: dovetail column, variable speed 1 HP motor, R-8 spindle with digital read out, tapered gibs with double locks, large 7-1/16″ x 26-5/8″ table and it comes with its own stand! This is an excellent value and great for just starting out or even as a dedicated, single-purpose machine in the shop! Motor: 1 HP, 110V, 12A, single-phase. Head tilt: 90° left & right. Distance spindle to table: 13. Table travel (longitudinal): 18-7/8. Table travel (cross): 5-1/2. Table size: 7-1/16″ x 26-5/8″. Spindle speed: 502250 RPM. Safety shut off switch. Fine feed head control. Clear guard on spindle. Rubber chip guards on ways. Stand footprint: 15-3/4″ x 16-1/2″. We are committed to your satisfaction. What Are My Options? Since our inception in 1983, Grizzly Industrial®, Inc. Has grown into one of the largest machinery companies in the. Our products can be found in all sizes of shops from the large industrial production users to the smaller cabinet and machine shops. We have the widest product selection under one brand in the world and we sell direct to the user, cutting out the dealer network, and resulting in lower prices to you. We ARE Grizzly Industrial, Inc. We reserve the right to correct errors and omissions in our listings, including specifications, photographs, and pricing. Thank you for your interest. The item “G0759 Mill/Drill with Stand and DRO” is in sale since Thursday, April 19, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “grizauctions” and is located in Bellingham, Washington. This item can be shipped to United States.

• Brand: Grizzly
• MPN: G0759
• Country/Region of Manufacture: China

Chevalier Model FM-3VK CNC Knee Type Milling Machine. 10″ x 50″ Tee Slotted Table. 15-1/2 Cross Travel of Table. 31-1/2 Longitudinal Travel of Table. Variable Spindle Speeds: 60 to 4,500 RPM. Proto Trak M2 CNC Control. 3-HP Main Motor & Controls. Weight 2,600 LBS and 72″ x 62″ x 89. Machine was running and in great condition prior to the removal on 4/19/18. I have video of the machine running under power. The item “Chevalier Model FM-3VK CNC Knee Type Milling Machine” is in sale since Wednesday, April 18, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “hoffonlineservices” and is located in Minneapolis, Minnesota. This item can’t be shipped, the buyer must pick up the item.

Jack’s Rigging & Machinery L. M/N MH 600E Year 1987 Spindle 80-4000 RPM SK 40 Spindle Taper Working area 245 m/m x 354 m/m X Axis 600 mm Y Axis 400 mm Z Axis 400 mm Quill Stroke 80 mm Vertical swivel type milling head Control DMG; Member of Gildemeister Group Work light Coolant pump and tank Manuals Transformer 20 kVA Very Good Running Condition; Inspect under power. The item “MAHO MH600E Universal CNC Horizontal Milling Machine” is in sale since Monday, March 12, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jrigg213″ and is located in New Britain, Connecticut. This item can be shipped to United States.

Milling Machine Accessory – Horizontal Milling Attachment R8 w/ Support &Arbor. Horizontal Milling Attachment with Arbor – R8 Fits Bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and R8 spindle taper Converts a vertical mill into a horizontal mill Note: Maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078) The dovetail angle on milling arbor support is 50°. (Note: 50° is more common than 55°, we have both available) Complete Set Includes. 7/16-20 bolt with 1/2 hex head. If you have any questions regarding this item, please let us know we’ll be happy to help. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “Milling Machine Accessory Horizontal Milling Attachment R8 with Support &Arbor” is in sale since Wednesday, April 4, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped worldwide.

• Brand: Gempower
• MPN: G103-R8-50
• Country/Region of Manufacture: Taiwan

9×48 2-J Bridgeport Milling Machine Hard chrome ways in good condition – see pictures One shot lube system Acu-Rite Digital Readout and Powerfeed both work. The head runs well in low neutral and high. All quill feed speeds work as well as feed forward and reverse. Everything on the head is functional according to our testing. I can load free of charge. It is under power, you wont be disappointed, this is a nice mill for the price. Mill, milling, machine shop, tools, tooling, lagun, tools, 1j, 9×42, series 1, r8, clausing, kondia, machine, machines, machining. The item “NICE 9 x 48 2HP Late Model Bridgeport Vertical Milling Machine with DRO & Feed” is in sale since Tuesday, May 8, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jcm122286″ and is located in Carlyle, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Model: Series I

A nice little CNC milling machine, complete with 4th axis table, computer, screen, connector cables, software loaded, service manual, software manual, 12″x6.5″x8 envelope, 3000 rpm, R8 spindle, fluid cooling modular drivers. This machine has been lightly used, mostly on aluminum. The software is Mach3, which has not been updated since 2016, and should be updated once installed and operational, since there have been several improvements on it. Weight complete, 1100 lbs. The item “CNC MILLING MACHINE” is in sale since Wednesday, May 9, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “themoldingman” and is located in Zephyrhills, Florida. This item can be shipped to United States.

• Brand: BOLTON

Features: -100% brand new and high quality. Easy installation and operation. Small volume, low noise, large torque, high speed. Nice appearance, as to meet the requirements of ergonomics. During the rapid escort, if the tool collide workpiece, or left and right suddenly reverse, there are special patented safety devices, transmission of plastic gear and electronic parts will not be damaged. The limited switch with a patent, waterproof, anti-oil, dust protective cover, the switch is not easy to damage. Jog function operates at any feed speed. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Apply to variety of machines, vertical turret milling machines, drilling and milling machine, other machinery. Specifications: Model: APF-500 Color:White Size:Approx. 175x120x280mm/6.89″x4.72″x11.02 Weight:6014g Material:High-carbon steel Suitable shaft:X, Y or Z axis Power Requirements:AC 220V Package include: 1x APF-500 Milling Machine Power Feed(US Plug) 1x User Manual. International buyers please note: a. The item “X Axis Power Feed Milling Automatic Table Bridgeport & Other Knee Mills Fits” is in sale since Monday, August 14, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “ynaan” and is located in HK. This item can be shipped worldwide.

• Brand: Unbranded/Generic
• MPN: Does Not Apply
• Country/Region of Manufacture: Hong Kong
• Color: White
• Size: 175X120x280mm/6.89″X4.72″X11.02″
• Weight: 6014G
• Material: High-Carbon Steel
• Suitable shaft: X, Y Or Z Axis
• Power Requirements: AC110V