feed Subscribe to feed
pic
18. 04
2022

Grizzly Power Feed (T10896) for G0619 Mill

Written by: admin - Posted in: grizzly - Tags: , , , , ,


Grizzly Power Feed (T10896) for G0619 Mill


Grizzly Power Feed (T10896) for G0619 Mill


Grizzly Power Feed (T10896) for G0619 Mill


Grizzly Power Feed (T10896) for G0619 Mill


Grizzly Power Feed (T10896) for G0619 Mill


Grizzly Power Feed (T10896) for G0619 Mill


Grizzly Power Feed (T10896) for G0619 Mill


Grizzly Power Feed (T10896) for G0619 Mill


Grizzly Power Feed (T10896) for G0619 Mill


Grizzly Power Feed (T10896) for G0619 Mill


Grizzly Power Feed (T10896) for G0619 Mill


Grizzly Power Feed (T10896) for G0619 Mill


Grizzly Power Feed (T10896) for G0619 Mill. I bought this sweet little unit back in 2019 but have never used it. I fitted it to the mill but find that I don’t do the kind of work that requires a Power Feed. I was drawn to this particular model because it has a clutch control that would allow me to adjust the table manually without having to push against a motor that was always engaged. Grizzly states that this device will work with the G0619 and the G0463. I’m also led to believe that it will work with any Seig X3 or SX3 mill but I only have experience with the fit on the G0619. Over the years, Grizzly changes the specs on various parts of their machines. As you can see from photo-3, the X-Axis Lead Screw on my machine sticks out beyond the end of the table by 0.375. When the Power Feed arrived, I found that the Lead Screw was too short to engage the clutch mechanism on the Power Feed. I spoke with Grizzly but they could offer no insight or make suggestions for a solution. In order to use the Power Feed, I had to mill some material off of the face of the clutch housing (See photo-2) to bring the lead screw into contact with the clutch mechanism. After that adjustment, it worked like a dream. If the lead screw protrudes more than 0.375, this unit will NOT work with your machine. If the lead screw is between 0.375″ and 0.190″ it should work but I can’t guarantee that it will – less likely as the lead screw gets shorter. Grizzly states that the Feed Rate is between 0 and 300 mm/min The high end works great but I have been unable to get the low end any lower than 70mm/min (2.7 inches/min) (See photo-5). Maybe my gibs are too tight or my ways need oil or maybe their marketing guys got a little carried away. The sale is for the Drive Motor, Clutch Mechanism, Limit Switch and Stops, Power Supply, Power Cable and Manual. If you have any questions or need additional pics, please let me know. Thanks for taking a look! This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “apothegm” and is located in this country: US. This item can be shipped to United States.

  • Brand: Grizzly
  • Function: Milling
  • Control: Manual
  • Machine Type: Mill Drill
  • Model: T10896
Tags: , , , , ,

No Comments

No comments yet.

RSS feed for comments on this post.

Sorry, the comment form is closed at this time.

Search this blog

Tag cloud