LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “h.resale_llc” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Bulgaria, Czech Republic, Finland, Hungary, Estonia, Australia, Greece, Portugal, Cyprus, Japan, Sweden, Korea, South, Indonesia, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, New Zealand, Philippines, Switzerland, Norway, Croatia, Republic of, Malaysia, Iceland.

1978 9″ x 42″ Yamazen Knee Type Vertical Mill YC-1-1/2VA Stock Number: 12638. Knee Type Vertical Mill. Number of spindle speeds. Range of spindle speeds. 80 to 2720 RPM. 2 HP / 1720 RPM. 5.6 / 2.8. 58″ x 60″ x 81 high. Longitudinal power table feed. Our machines are single item listings that are listed with multiple online advertisers and are therefore offered subject to prior sale. NS Machine Terms & Conditions of Sale. New machinery Net 30 days. Used machinery Net Cash. Interest will be charged for all accounts past 30 days from invoice date at maximum rate allowable by law. Machinery descriptions are intended only as a guide and their accuracy is not guaranteed. All prices listed are in U. Dollars unless otherwise specified in writing. Quotations are subject to change without notice. All agreements contingent upon strikes, fires, accidents, delay of carriers and other delays unavoidable or beyond our control and all agreements and/or contracts made by salesmen or representatives are subject to approval by N. Federal, State and Local Government Safety Standards and all Industrial Safety Standards. Occupational Safety and Health Act of 1970. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ns_machine” and is located in this country: US. This item can be shipped to United States.

• Model: Yamazen
• Brand: Yamazen
• Spindle Horsepower: 2 hp
• Function: Milling
• Machine Type: Vertical Milling Machine
• Max Spindle Speed (RPM): 80 – 2720 RPM
• Table Length: 42\
• Stock Number: 12638
• Model Number: YC-1-1/2VA
• Table Width: 9\
• Serial Number: 21922

This Roland Modela Pro MDX-650A 3D Milling Machine w/ Enclosure, ZAT-650 is in fair cosmetic condition with signs of use. This unit has scuffs and scratches present, as well as staining and some signs of corrosion. There are a number of additional tool pieces and fittings included: Picture 1. Various manuals, info guides, and setup guides are available directly from Roland. There was a ZAT-650 controller sitting inside the unit not connected, I’m not sure if this unit has the correct spindle for it but it is included for completeness. I was able to power on this unit as shown, but the display only showed “Emergency Stop EXT1 is not connected” and I was unable to move passed this message. Approximate unpacked dimensions: 47″ x 41″ x 42. The cost of this pallet will be paid. No software, power cords, or other accessories are included unless stated above. The unpacked weight of this item is 482 pounds on the pallet shown. Is there a Dock or Forklift available? The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatory agencies. Outback Equipment Company Gilroy, California. Listing and template services provided by inkFrog. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “outback6″ and is located in this country: US. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Brand: Roland
• MPN: MDX-650A
• Model: Modela Pro

Haas 50 Taper Transmission. Comes with motor mount standoffs (will need new rubber isolators), encoder, belt, oil pump, all solenoids, etc. It’s about 350lbs. Let me know if you have any questions. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “hoosker84″ and is located in this country: US. This item can be shipped to United States.

• Model: Haas 50
• Brand: Haas

LAGUN 48″ x 9″ MULTI-SPEED VERT MILLING MACHINE FT. 2 +POWERFEED & KURT VISE. Item will only include what is shown in the photos. Most of our items are used and may show signs of wear and/or need calibration; we test the basic functional features of our items and describe the physical condition to the best of our knowledge. MACHINE IS IN WORKING CONDITION, CHECK THE PICTURES THEY’RE ALSO PART OF THE DESCRIPTION. ITEM IS AVAILABLE FOR INSPECTION AND IT’S CURRENTLY LOCATED AT THE CITY OF PICO RIVERA. OR USE YOUR OWN. THANK YOU FOR WATCHING! Made in Spain by Republic-Lagun Machine Tool Company. This is a Multi-Speed Vertical Milling Machine in working condition. Made of highest grade Meehanite Casting in accordance with ASTM specifications. Lagun Mills are built oversized for increased durability and ruggedness. They outweigh major competitors by nearly 1,000 lbs. Table – Strength and Capacity. Larger than most major competitors. Better support for larger parts. Travels- Extra Long Y axis travel eliminates the need to reposition many workpieces. Also, digital readout scale can be mounted on the back side of the table while still allowing 15 of travel. The scale is less susceptible to damage on the rear of the table. Rolled and ground to provide better accuracy and with a high nickel content to improve durability. Adjustable anti backlash nuts allow for compensation as the machine ages. Handles are spring loaded to allow repositioning once locked. This advanced design clamps the table to the saddle (does not push on gib). This will not distort the saddle when locked. One Shot Lubrication Pump. One shot lubrication to the ways and screws to ensure equal oiling to all critical areas. Hardened and Ground Ways. Lagun Mill ways are induction heat-treated, then precision ground. Extra-Wide Box Ways and Dovetail Guides. All Lagun Mills are standard with a unique combination dovetail/square Y-Axis way for stability and accuracy. This offers a wider area for support and the benefit of a dovetail for maximum accuracy. Table will not drop off at the end of travel. This design is exclusive to the Lagun machines. Has a massive ram allowing a 22″ travel and a maximum 27″ throat that provides greater flexibility. At maximum quill travel, 3/4 of the total quill length is still inside the housing, providing extra support and rigidity. Have easy access to feed Feed Motor and Gear Box assembly for ease of maintenance and service. Height Above Floor: 47. Travels: Table Travel (X-Axis): 32″ Saddle Travel (Y-Axis): 16″ Knee Travel (Z-Axis): 16″ Quill Travel: 5″ Ram Travel: 22. Spindle: Throat Distance: 5 min. Table to Spindle Nose: 4 min. Spindle Diameter: 1.875″ Quill Diameter: 3.375″ Quill Feed: 0.0015 / 0.003 / 0.006 in. /rev Taper: R8 Spindle Speeds Range (8): 55 – 2,940 rpm. Head Adjustments: Head Cant (forward/back): 45 degrees Head Tilt (side to side): 90 degrees Head Swivel (side to side): 360 degrees. Machine Constructive Dimensions: Column Turret Diameter: 15″ Knee Width: 11-1/2″ Knee to Column Bearing Length: 18″ Saddle & Table Bearing Length: 23″ Ram & Turret Bearing Length: 19″ Ram Total: 36″. General: Motor: 2 Horsepower, 220-440 Volt, 1,710 rpm, Three Phase Electrical: 220 Volt, Three Phase Overall Dimensions: 63″ x 63″ x 88 tall. Comes as shown in pictures. Most of our item are used and may show signs of wear and/or need calibration, we test the basic functional features of our items and describe the physical condition to the best of our knowledge. We clearly list these items as not being tested, damaged or for parts only. All AS-IS sales are final. Electronic and electrical devices come with a working condition guarantee unless it is described as not working or for parts only. You must use a licensed contractor for installation. Fail to use a licenced electrician or technician will void any warranties. Please note that exchanges are not always available for every item we sell. All Items must be paid at the same time for the same invoice. All items should have the same address. Please look at the table below to get a better estimate. Crating and Special Packing Requirements. Please keep all the elements of the package together as you received it and take clear pictures of the damage. Powered by SixBit’s eCommerce Solution. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “bidonindustrial” and is located in this country: US. This item can be shipped to United States.

Application: Juvenile Activity Center, School General Technical Room, Science and Technology Activity Room Equipment, Science and Technology Museum Student Science and Technology Creation. Description: The main components of the main shaft box, intermediate block, connecting block, tailstock, large slider, small slider, hand wheel, support and so on are made of metal. The quality of the product is improved, more durable and more precise. Technical Parameters: Input voltage: AC100V240V / 50/60HZ Output voltage: DC12V 2A Motor rated power: 12W Motor speed: 18000r/min±15% of high speed motor Low speed motor: 10000r/min ± 15% Spindle speed: high speed motor 3000r/min±15% Low speed motor: 1600r/min ± 15% Spindle jump. Package included: 1 set of Milling Machine. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “htg-electronic” and is located in this country: US. This item can be shipped to United States.

• UPC: 870884676635
• Brand: Unbranded
• Model: W10004M
• Country/Region of Manufacture: China

More pictures upon request. Moving Sale – Must go by Aug 31st. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “terradirectinc” and is located in this country: US. This item can be shipped to United States.

• Brand: Haas
• Model Year: 1995
• Machine Type: Machining Center
• Model: HAAS Model VF-7