General Info: Stock #: JB-JV-220003 Location: Michigan Brand: Mori Seiki Model: NH6300DCG II Serial #: NH632JG0242 Year: 2010 Approx. Specifications: Number of Axis: 4 Pallet Length: 24.8″ Pallet Width: 24.8″ Pallet Load Capacity: 3,307 Lbs. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. STORAGE: The Equipment Hub will provide up to 30 days of free storage, unless otherwise specified on the accompanying “quote/invoice” form. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “equipmenthub” and is located in this country: US. This item can be shipped to United States.

• Machine Type: Machining Center
• Control: CNC

A machine used for making jewelry. Used equipment from SCAD. Good condition, keep as a backup or use for parts. Comes with three binder manuals and spare parts etc. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rebelgfx” and is located in this country: US. This item can be shipped to United States.

• Model: Roland Jewela JWX-10
• Brand: Roland
• Function: Milling
• Control: CNC
• Machine Type: Milling Machine

THIS LISTING IS FOR THE NINE (9) USED PARTS AS SEEN IN THE PICTURES, AND NOTHING MORE. THESE USED ITEMS ARE “NOT” IN PERFECT CONDITION. DINGS, SCRATCHES, FINISH LOSS AND SOME WEAR CAN BEE SEEN. PLEASE MOUSE OVER THE PICTURES AS THEY ARE PART OF THE DESCRIPTION, AND TO SEE. PLEASE READ AND UNDERSTAND ALL THAT IS WRITTEN IN THIS LISTING, AND ASK ANY QUESTIONS. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “kds.salvage” and is located in this country: US. This item can be shipped to United States.

• Non-Domestic Product: No
• Brand: BRIDGEPORT
• Custom Bundle: No
• Model: 2J
• Modified Item: No

Kitamura MYCENTER-1XiF SPARK CHANGER CNC Machine 2002. The Fanuc control, including the following items will be removed from the machine. The rest of the machine, including, but not limited to, wiring and magnetic cabinet, relays and contactors, motors and pumps, spindle, tool changer, coolant tank, etc. 1- Fanuc front screen and Fanuc keypads on the front panel. These are circled in red in the pictures. 2- Fanuc servo amplifier, Fanuc spindle amplifier, Fanuc power supply, Fanuc I/O. Basically, the yellow modules circled in red in the picture. 3- Cabling between items 1 and 2. 4- Encoder from the back of servomotors for X, Y, and Z directions. The Fanuc motors for tool changer and for the pallet changer are not touched. For retrofit, you need all motor, typically, however, depending on the control you use, a particular type of encoders will be needed to be mounted on the back of the motors. Feel free to reach us with your questions. The machine weight is 11,500 lbs (just scrapping the machine leads to a significant number). Table Load Capacity: 220lb. Travel: 20″ for X Axis, 14″ for Y Axis, 16 for Z Axis. Spindle Speed: 15,000 RPM. Rapid Feed Rate: 1968 ipm for X and Y Axes, 1417 ipm for Z. Cutting Feed Rate: 0 to 1417 ipm for all axes. Automatic Tool Changer with 30 Tools. Spindle Motor Power: 10hp. Coolant Motor Power: 1.6hp. Lubricant Motor Power: 2/75hp. Hydraulic Motor Power: 1hp. Machine Weight: 11,500lb. 2-Station Rotating Pallet Changer (Spark Changer). High Pressure Cooland (HPC). All manuals including electric and hydraulic schematics, as well as parts, maintenance, and operation manuals are available and come with the machine. The unit was well maintained, running aluminum parts. Vektek Hydraulic Work holding Pump With 2 x 5 Chick Hydraulic Vise is included in the price. We can load the machine on your flatbed for free. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “direct_drive_robotics_llc” and is located in this country: US. This item can be shipped to United States.

• Model: MYCENTER-1XiF
• Spindle Horsepower: 10 hp
• Machine Type: Machining Center
• Model Year: 2002
• Power Source: Hydraulic
• Control: CNC

2J Variable Speed Vertical Mill, S/N 12BR132188. Stock # – 34569. Equipped with dro as shown. Table Size is 9″ x 48″. Trade in from university. Machine has not been evaluated at this writing. Can be inspected in our Dayton OH showroom. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amcsales” and is located in this country: US. This item can be shipped to United States.

Grizzly G8689 Mini Milling machine with professional ball screw conversion. Wired for and includes Geckodrive G540. All you will need is a power supply for the Geckodrive and the software of your choice. The motors are wired for plug and play operation. There are wires in the harness for limit switches but they are not installed or included. Converted the machine a few years back and made a few test cuts. Decided I needed a full size machine for what I was doing and it’s been sitting ever since. Never been used other than some test cuts. With the ball screw conversion you get extreme accuracy and speed which is what these machines need to operate successfully under computer control. It’s a nice little machine. Some light surface rust stains on the table and the rear way cover has a tear (easily repaired) but otherwise in great shape. I have always loved mini mills. I’ve owned a sherline cnc mill and a taig cnc mill. Both of those are toys next to this. Mills need mass and this thing has it. It’s heavy for its size! Those ball screws are just as beefy. Look at that closeup of the column screw! X and Y are the same size! This is a deal. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jogen_834″ and is located in this country: US. This item can be shipped to United States.

• Control: CNC
• Machine Type: Milling Machine

Recent searches

• grizzly milling machine electric motor 1/3hp

Applications This DRO kit is commonly fitted to machines, especially for metal working – lathes, cylindrical grinders, milling machines, surface grinders, boring mills and other machine tools – to allow the operator to work faster and with greater accuracy. Use of DROs is not limited to manually operated machines. CNC machines can usually be switched to manual operation, and in this case a form of DRO is simulated on its control panel. Jewelry Design & Repair. Digital Readout& Linear Scale. Welding & Soldering Tools. Rosin Heat Press Machine. 2 Axis Digital Readout LCD DRO Display+10”&40” Linear Scale Kit Encoder Mill. 2 Axis Digital Readout DRO Display 12″ & 40″ TTL Linear Scale Encoder Mill Lathe. This DRO kit is. Commonly fitted to machines, especially for metal working – lathes, cylindrical grinders, milling machines, surface grinders, boring mills and other machine tools – to allow the operator to work faster and with greater accuracy. 2PCS Linear scales: 300mm+1000mm (12″ & 40″). 1PCS 2Axis digital read out with holder and mount bracket. 2PCS Mounting base for scales. 2PCS Protective cover for scals some screws for scales. So to accomplish a perfect project. To offer excellent long-distance viewing. (4)DRO providing a two axis display with pitch circle calculator, diameter/radius conversion, absolute and incremental toggle, and inch metric toggle. (5)Digital readout kit can avoid wasting weeks to check machine precision. (6)Lifetime free technical supp. Supply Voltage range: AC 80V220V; 5060Hz. Operating temperatur: 045 degree centigrade. Storage temperatur: -3070 degree centigrade. Relative humidit: Less than 90%. Readout allowable input signal: TTL square wave. Allowable input signal frequency: Less than 5M Hz. Max resolution of digital display length. 5µm (0.005mm/0.0002). Min resolution of digital display angle : 0.0001/pulse. Dimensions: 28317870mm (11.2″7″2.8). Linear Scale communicate: DB9(RS232). Backup data for power fail: power off Memory by E2PROM for ten years. Lifetime: five million times. Please see the details above. We are a leading provider for industrial automation control, CNC machine and electrical equipment. Each product, in which FastToBuy sales online, is subject to a 100% quality control. We will reply you ASAP. Feedback, so that we can satisfactorily solve your concerns. This item is in the category “Business & Industrial\Electrical Equipment & Supplies\Other Electrical Equipment & Supplies”. The seller is “fasttobuy2012″ and is located in this country: US. This item can be shipped to United States.

• Model: DRO-2Axis 300+1000
• Axis: 2Axis
• Compatible Equipment Type: Lathe
• Supply Voltage range:: AC 80V~260V; 50~60Hz
• Power consumption:: 15VA
• Scale: Optical
• Length resolution:: 5µm
• Type: Digital Readout
• Length: 300&1000mm
• Brand: ToAuto

Mazak 1-1/4 Boring Bar holder. Will fit the following machines. Hyper Quadrex 200/250MSY with 16 position turret. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “northwestmachine” and is located in this country: US. This item can be shipped to United States.

• Model: mazak cnc
• Brand: Mazak
• Control: CNC

PERFORMANCE MACHINE TOOLS, INC. TOYODA FV-1165 VERTICAL MACHINING CENTER. 51.2″ x 25.6″. Spindle Nose to Table. 4.9″ – 28.5″. RAPID TRAVERSE RATE, X-Y. 6,000 RPM (2 speed gear). 170″ x 160″ x 116. APPROXIMATE WEIGHT – NET. 220V / 3 PH / 35 KVA / 60HZ. FANUC OiMF CONTROL with USB and FLASH DRIVE. COOLANT THRU SPINDLE at 1000 PSI. 2 RANGE GEARED HEAD. TWO CHIP AUGERS – CHIP CONVEYOR & BUCKET. MISTAWAY Coolant oil mist collector, variable speed control. SET of Toyoda and Fanuc Manuals. Power on: 13,432 / Run: 3918. Stock here in our Fremont, Ca showroom. Prep and Loading is included. Offered by the used machinery division of PERFORMANCE MACHINE TOOLS in Fremont, CA. Machine prep and loading is included. PERFORMANCE MACHINE TOOLS INC. We are a stocking dealer of New & Used Metalworking Machinery. We offer CNC & Toolroom Equipment as a family run business since 1979. We look forward to working with you. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “pmtools” and is located in this country: US. This item can be shipped to United States.

• X-Axis Travel Bed: 41 in – 60 in
• Control: CNC
• Machine Type: Milling Machine