Shars CNC 3 45° Indexable Face Mill SEHT 43 Insert 6 Flutes New P

Shars CNC 3 45° Indexable Face Mill SEHT 43 Insert 6 Flutes New. Cutting Diameter D: 3. Height H: 1.970. Width A: 3.650. Depth of Cut ap: 0.236. No of Flute: 6. Insert Size: SEHT 43 (ISO1204). Surface milling in difficult condition of steel, alloy steel, stainless steel, and heat resistant steel, cast iron and aluminum alloys. Benefit from the 45 degree lead angle allows an increase of feedrate by 50% over 90 degree face mill and also allows this face mill to used on smaller horse power mills. It uses industry standard SEHT / SEHW / SEHX 43 (ISO 1204) insert which has a positive 20 degree clearance angle. The insert pockets are designed to be 19 degree positive inclined to minimize vibration and each pocket has an chip escaping pathway to help preventing chip built-up on insert edge. Suitable for most face milling applications. Reduces vibration on long overhang applications. Chip thinning effect allows for increased table feeds. High Positive cutting geometry. Photo is only showing an example of face mill/end mill from this. Each insert pocket is designed to reduce run-out and extent insert life. Use SEKT / SEHT / SEHW 43 1204 insert (insert not included). Setting Angle: 45 degree. Radial rake angle: -7 degree. Axial rake angle: 19 degree. Certification included with each face mill, Axial runout, Radial runout. We have more REPLACEMENT ACCESSORIES available. SEHT 1204 AFTN Insert for Steel. SEHT 1204 AFTN Insert for Alumimum. 1 BT40 Shell Mill Holder. 1 CAT40 Shell Mill Holder. HSK63A 1″ x 2.37″ Face Shell Mill Tool Holder. We also have different Face Mill and End Mill available, please visit my eB. If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est.