G0758 6 x 20 3/4 HP Mill/Drill

With a high-torque but quiet motor, this versatile mill/drill is ready to be a key player in your shop. Drawing from the heritage of producing previous mill/drills, the G0758 6″ x 20″ Mill/Drill comes packed with impressive features. The 3/4 HP motor powers the variable-speed spindle control from 50 to 2000 RPM and is displayed on a DRO. Tracking spindle depth is as easy as reading a separate DRO with inch/mm display and zeroing function. Additionally it has super-rigid precision-ground dovetail headstock column and table ways, coarse and fine spindle downfeed, and precision handwheel control for X, Y, and Z-axis. If that is not enough, this fiesty champ has one of the largest tables, table travel, and motor sizes in its class, allowing it to take on a huge range of workpiece sizes. With its R-8 spindle taper, it can also make use of a wide variety of tooling. The head is equipped with a special shifter knob that allows you to drop power-transfer gearing down for maximum torque in the lowest RPM range. Shown with optional T26612. Stand and chip tray. The G0758 manual was written by our U. Based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your mill drill. Made in an ISO 9001 factory. Motor: 3/4 HP, 110V, single-phase, 10A. Max distance spindle-to-column: 6-5/8. Max distance spindle-to-table: 8-3/4. Drilling capacity: 1/2 mild steel. Column tilt: 45° left/right. Table size: 5-3/4″ x 19-3/4″. Overall dimensions: 19-3/4″ W x 21″ D x 30-1/4 H. Dovetail head column and table ways. High-torque, low-noise DC motor. Variable-speed spindle with DRO. 3-Axis precision handwheel control. Coarse and fine spindle downfeed. Zero-setting dials on handwheels. 3-16mm B16 drill chuck. Drill chuck arbor B16 x R8. Open-ended and hex wrenches.