STAND INCLUDED WITH LISTING! This machine requires a Standard 120V Power Supply! Compact, Accurate, Economical Machine. Great for those who are looking for a. Compact machine for a smaller work shop, yet need the ability to take heavier cuts. Compared with other machines in this size range. Spindle is Supported by High Precision Tapered Roller Bearings. Mill Head May be Tilted ±90° (both left and right). Precision Manual Fine Down Feed is standard. Adjustable Tapered Gibs for longer life. Positive Locks are standard for Table, Head, Quill, and Column. Easy Reading Dials Have Satin Chrome Finish, Graduated in. Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from. Generous 18-1/4? Spindle To Table Max Distance for taller work. 8-1/2? Y Axis Travel, More than other machines in this class. 3 Axis DRO Installed. Note: if a 3 axis DRO is added to the machine, the 3rd axis of the DRO reads the HEAD up and down, Not the quill, so it is not doubling up on the measurement. If you add the 3 axis DRO, now both Z Axis movements are covered. Drilling Capacity: 1-1/4? Max. End Milling Capacity: 1? Max. Face Milling Capacity: 3? Table Size: 27-1/2? X 7-1/8? Cross Travel (Y Axis): 8-1/2? Longitudinal Travel (X Axis): 15? Table Leadscrew Pitch 10 TPI. 100? Per Turn Table Dial Graduations. 001? Vertical Travel (Z Axis): 16? Max Distance Spindle to Table: 18-1/4? Taper of Spindle: R-8, w/7/16-20 Drawbar Thread Spindle (Quill) Travel: 3? T Slot Size: 1/2? (T Slots are slightly less than 1/2? , actual size 12mm, our 1/2? Kit is sized for this machine) Range of Spindle Speeds: 115 – 1700 rpm, 6 Steps Head Tilt: Left & Right ±90° Motor: 1 HP Net Weight (Not Including Base): 475 LBS Net Weight (With Optional Base): 575 LBS Power Required: 110/120V, 20A Circuit. 5′ cord, Includes 120V Plug with ground Dimensions (Assembled on stand): 39? W x 74? H x 30? D Height with head at top of Z travel: 80? (On Stand) Height with head at normal working height: 75? (On Stand) Optional Stand Height 32? Country of Origin: China. Machine Base Dimensions (Cast Iron Base of machine, where it sits on the chip pan) Approx. 13-1/2″Wx21″D Machine Base Dimension (Bolt Pattern) Approx. 11″Wx14-1/4″D Table Height, machine base (Where it sits on the chip tray) to table, approx. 8-1/2? Footprint of stand at floor, approx. 14-1/2? W x 21-1/4? Front to back. Average time delivered is 2-7 days depending on how far from Pittsburgh you are located. If you need liftgate service, please message us one you place your order to let us know. Quality Machine Tools / Precision Matthews Machinery Co. 1060 Montour West Industrial Park. We are machinists here too and have been in business for over 20 years. We know our machines and we know what we sell. So if there is any question, we can help.

INCLUDES 3 AXIS DRO INSTALLED AND STAND with Leveling Feet. This machine uses 110 /120V Standard Power! Highlights Of This Machine that set it apart from others on the market. Compact, Accurate, Economical Machine. Great for those who are looking for a. Compact machine for a smaller work shop, yet need the ability to take heavier cuts. Compared with other machines in this size range. Spindle is Supported by High Precision Tapered Roller Bearings. Mill Head May be Tilted ±90° (both left and right). Precision Manual Fine Down Feed is standard. Adjustable Tapered Gibs for longer life. Positive Locks are standard for Table, Head, Quill, and Column. Easy Reading Dials Have Satin Chrome Finish, Graduated in. Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from. Spindle To Table Max Distance for taller work. Y Axis Travel, More than other machines in this class. 3 Axis DRO Installed. Stand with Leveling Feet. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1? Face Milling Capacity: 3? Cross Travel (Y Axis): 8-1/2? Longitudinal Travel (X Axis): 15? Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16? Max Distance Spindle to Table: 18-1/4? Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3? T Slot Size: 1/2? T Slots are slightly less than 1/2? Actual size 12mm, our 1/2? Is sized for this machine. Head Tilt: Left & Right ±90°. Net Weight (Not Including Base): 475 LBS. Net Weight (With Optional Base): 575 LBS. Country or Origin: China. Power Required: 110/120V, Minimum 15 Amp Circuit, Approx. 5′ cord with standard 120V plug included. Dimensions (Assembled on stand): 39? Height with head at top of Z travel: 80? Height with head at normal working height: 75? Optional Stand Height 32? Machine Base Dimensions (Cast Iron Base of machine, where it sits on the chip pan) Approx. 13-1/2″Wx21″D Machine Base Dimension (Bolt Pattern) Approx. 11″Wx14-1/4″D Table Height, machine base (Where it sits on the chip tray) to table, approx. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in this country: US. This item can be shipped to United States.

• Country//Region of Manufacture: china
• Spindle Horsepower: 2 hp
• Brand: Precision Matthews
• Function: Milling, Drilling
• Control: Manual
• Machine Type: Vertical Milling Machine
• Custom Bundle: No
• Voltage: 110 V
• MPN: PM-30MV-w/dro
• Spindle Taper: R8
• Modified Item: No