Removed from an FV56A.

Stantec Sales & Services is Offering the Following Equipment. Supermax Milling Machine 9″ x 42″ Table Step Pulley 1 HP 3 Phase Knee Mill. Needs a few things. Lubrication manifold on left side is broken and will need replaced. Missing a table lock for x axis. All products are as is. I shall have no other obligation or liability, direct or indirect, of any kind, including liability for special, incidental, or consequential damages. This item is for sale locally and may end at any time.

Stantec Sales & Services is Offering the Following Equipment. Supermax Milling Machine 9″ x 42″ Table Step Pulley 1 HP 3 Phase Knee Mill. Needs a few things. Lubrication manifold on left side is broken and will need replaced. Missing a table lock for x axis. All products are as is. I shall have no other obligation or liability, direct or indirect, of any kind, including liability for special, incidental, or consequential damages. This item is for sale locally and may end at any time.

GENERATION MACHINE TOOLS, INC. Specializes in preowned, cycled and guaranteed CNC machinery, conventional machine tools and fabrication equipment. SUPERMAX YC 1-1/2 VS Vertical Milling Machine DRO #GMT-3853. SUPERMAX YC 1-1/2 VS Vertical Milling Machine DRO #GMT-3853 Reference # GMT-3853 Model # YC-1-1/2VS Serial # 108405 Year of manufacture- 1981′ Table working surface- 9″ x 42″ Number of t-slots- 3 Range: longitudinal- 29-21/64″ Cross- 12″ vertical, knee- 16″ quill- 5″ Maximum/Minimum distance, spindle nose to table- 18-3/8″ / 0 Maximum/Minimum distance, centerline of spindle to face of column- 19″ / 6-3/4″ Ram travel- 12″ Head tilt, left & right- 90 degrees Head tilt, front to rear, each way- 45 degrees (3) Power quill feeds. 0053 I. P. R. Spindle Speeds- (8) 80 – 2,720 R. Spindle taper- R-8 Maximum collet capacity- ¾. MITUTOYO two-axis digital readout One-shot lubrication system 2 H. 3/60/220-440 volt spindle drive motor and electrical controls Machine is wired for 220 volt operation. Machine weight- 2200 Lbs. Machine dimensions- 60″ L x 74″ L x 86” H Machine location- F. O. B.

3 PHASE 220 IF YOU NEED IT TO BE SINGLE PHASE WE CAN INSTALL A VFD 275 OR 100 EXTRA AND YOU INSTALL IT THEN MACHINE WILL RUN ON 220/208 SINGLE PHASE VOLTS.

SuperMax Max-8 CNC 3-Axis Machining Center with 24 Tool Holder. This machine was in operation prior to be removed from Reliable Machine & Engineering in Polo, Missouri after the business closed. It was put in transport mode and professionally moved to a climate controlled facility for a business that never got operational. Has new lexan windows. I have a video available of machine operating prior to removal of facility.

2hp with one shot lube system. Dro and Servo power feed on X axis. Machine has already been gone through and ready to run. Just plug and play. 220 3 phase cam add VFD drive at our cost if you need sigle phase. Just power up and go. Comes with Vise, R8 Collet set and drill chuck. Send zipcode for actual cost. Any questions message or call.

Please call with any questions. We will assist you in any reasonable way to help get your items to your destination, All checks subject to bank verification. Please Call: Two Zero T hree, Five Nine Two, Eight Four Zero Two, with any questions or concerns, Thank You! You are welcome to inspect any machine by appointment. Guerrera Machine Company, LLC. Will not be held liable for any inaccurate information. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “guerreramachinecompanyllc” and is located in this country: US. This item can be shipped to United States.

Supermax CNC-20 Milling Machine YCI 9×49 Bed 60-4200RPM R-8 Quill 3Hp 3Ph READ. For Parts or Not Working. Used, in Good Working Condition. Removed From a Working Environment. The CNC axis control DOES NOT WORK. Has a software issue. Powers up but does not upload the CNC program. Machanically this machine is in good working condition. Table is 9×49″ with 16×26″ travel. Knee travel is around 14. 3Hp Motor is wired for 230V. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “arrowindustrialsales” and is located in this country: US. This item can be shipped to United States.

• Brand: Supermax
• Model: CNC-20
• MPN: CNC20
• Size: Length: 63 in. Width: 65 in. Height: 88 in.

Mill works but the auto feeds do not. Has a DRO and VFD so it runs on single phase 220. Comes with vice, VFD manual and hold down kit. We basically used it as a drill press to do bolt circles. I can help disconnect it and help get it into the driveway, it is up to you to take it from there. The driveway is wide so a Ryder with liftgate will fit to make it easier. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mopar_buyer” and is located in this country: US. This item can be shipped to United States.

• Model: Supermax
• Machine Type: Vertical Milling Machine
• Function: Milling
• Brand: Supermax
• Voltage: 220 V