VEVOR Milling Machine Power Feed. Our power table feed brings a stable transmission ratio and high load-bearing capabilities. Take control of speed with ease using the manual lever and automatic knob. Ideal for 5/8” end shaft diameter machines and Z-axis milling machines. Experience efficiency and reliability like never before! Equipped with Gleason spiral bevel gears, our milling machine power feed ensures a stable transmission ratio, low noise output, high transmission efficiency, and excellent load-bearing capacity. With noise levels? 85dB, providing a conducive environment for your work or study without disruptions. Our power feed table mill is equipped with overload protection. In instances of rapid transmission, if there is a collision or instantaneous reversal between the tool and the workpiece, a special security mechanism safeguards the gearbox’s plastic gears and electronic components from damage. Our compact and lightweight power table feed is easy to install and operate. The control panel features clear functions, making the operation straightforward. Additionally, we provide a detailed installation and user manual, ensuring you have all the information you need to operate effectively. Our power feed milling machine comes with 1 x copper gear, 1 x install the retainer plate, 2 x limit blocks, 4 x fixing screws, 1 x limit switch waterproof box, 2 x limit switch springs, 15 x adjusting shims, 1 x extended shaft, 11 x extended shaft springs, 1 x copper gear gasket, and 1 x flat key. Ultimate High-Compatibility Solution: Our power feed table mill Includes everything needed to mount on most knee-type mills with a 5/8” end shaft diameter that shares the same installation pattern, such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, and others. Infinitely Variable Speed Control: With the continuously variable speed knob, you can adjust the speed according to your needs. Our milling machine power feed offers a rated torque of 450 in-lb(50.7 NM), a maximum speed of 200 RPM, a maximum feed rate of 965 mm/min, and a maximum return speed of 1385 mm/min. Highly Stable and Efficient: Featuring Gleason spiral bevel gears, our power table feed boasts stable transmission ratios, low noise, high transmission efficiency, and high load-bearing capacity. Plus, it comes with a special security device that protects the gearbox plastic gears, and electronic components from damage in the event of tool collision or sudden reversal during rapid transmission. Easy to Use, Manual or Automatic: Our power feed milling machine offers two different speed adjustment modes: manual and automatic. With manual control buttons, you can adjust the speed as needed. Alternatively, set the device to automatic constant speed mode for hands-free operation, making your milling tasks a breeze. Designed for Z-axis Direction: This power feed woodworking enables smooth movement in the Z-axis direction. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices.

6 / 160 mm Dividing Head for Milling Machine. MT3 Headstock Taper & Complete Set & Simple Operation. Semi-Universal Dividing Head is a simple Index Center and can be used for direct and indirect dividing. Complete the gear, face, flute processing, and no need accessories, the same construction as universal type. With rotary indexer, the 24 quick-dividing holes can complete BS-2A 2,3,4,6,8,12,24 division indexing. Attache 3 dividing plates and the dividing head indirect dividing in any division indexing 2-50.51-380. Rich Dividing Head Set. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Vertical & horizontal milling machine with headstock chuck for the lathe. Swing: 6-1/2″ / 168 mm, Center Height: 5″ / 128 mm. Our universal dividing head features ruggedly constructed hardened and ground worm gear. The reduction ratio is 1:40. Designed with a rotary table and indexing chuck for convenient operation, the 24 quick-dividing holes can complete 2, 3, 4, 6, 8, 12, 24 division indexing. The ball-bearing of this indexing head is of high precision and smooth turning. An extra dead center is provided for rapid use. Our rotary indexer comes with 3 dividing plates of different sizes. The tool has easy indexing of divisions from 2 to 50, with most numbers up to 380. The rotary indexer is ideal for various uses in milling, grinding, and drilling work. Chuck Diameter: 6 / 16 cm. Spindle Speed: 2500 RPM. Swing: 6-1/2 / 16.8 cm. Center Height: 5 / 12.8 cm. Reduction Ratio: 1:40. Net Weight: 77 lbs / 35 kg. Headstock Dimensions: 4.4″ x 7.9″ x 11.8 / 11.3 x 30.2 x 21.9 cm. Tailstock Dimensions: 4.5″ x 6.6″ x 5.2 / 11.5 x 17 x 13.4 cm. 1 x 6 Dividing Head. 2 x Dividing Plates. 3 x 6 Chuck Jaws. 1 x Dead Center. 1 x Set of Related Accessories. Adjustable Angle: The semi-universal dividing head features a 6 3-jaw chuck, Spindle Speed: 2500 RPM. The headstock is adjustable from the horizontal position to 90 degrees upward. Free 3 more jaws for 6 chuck. Solid Construction: This indexing head is made of HT 200 to be a long life. A rigid frame provides high accuracy with little backlash for a smooth rotation. Precise & Accurate: Dividing head milling machine with laser engraving scales. The 24 quick-dividing holes can complete 2, 3, 4, 6, 8, 12, 24 division indexing. One circle for 360 degrees, one scale stands for 1 degree. MT3 Tailstock Adjustable: Huge live center for heavy-duty workpieces. Ball-bearing precision; turns smoothly. The model of the tailstock is MT3. One extra dead center is included. Rich Dividing Head Set: 3 dividing head index plates are attached along with the dividing head for indirect dividing in any division indexing 2-50, 51-380 except prime numbers and specific other numbers. People Who Bought This Item Also Bought. VEVOR BS-0 Semi 5 Indexing Dividing Head 3-Jaw Chuck Tailstock For CNC Milling. VEVOR Compound Milling Machine Work Table 2 Axis Cross Slide Bench Drill Vise. VEVOR 8 Precision Horizontal and Vertical Rotary Table. Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate. VEVOR Tilting Milling Table Tilting Angle Milling Machine Adjustable Plate. VEVOR Rotary Table XY Axis Rotary Table 8 3-Slot for Milling Drilling. VEVOR 6 Rotary Table Horizontal Vertical Dividing Plates for Milling Machine. VEVOR Square Air Cooled Spindle Motor 2.2KW CNC Spindle Motor 220V ER20 Collet. VEVOR Milling Drilling Machine Worktable Cross Slide Table 4″ X 7.3″ Bench Table. VEVOR 2.2KW Air Cooled Spindle Motor for CNC Router Milling Engraving 4 Bearings. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. 4 / 100 mm. 6 / 160 mm. 0.28 / 7 mm. 0.83 / 21 mm. 6.5 / 168 mm. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours.

VEVOR BS-0 Semi 5 Indexing Dividing Head 3-Jaw Chuck Tailstock For CNC Milling – YouTube. BS-0 Precision Dividing Head. MT2 Headstock Taper & Complete Set & Simple Operation. The indexing head doesn’t only look great but allows you to do more with your milling machine: measuring specific angles and dividing a circle into equidistant arcs. It comes with 3 interchangeable indexing plates and a tailstock to ensure more precise and stable work. It will be your perfect assistant to machine the flutes of a milling cutter, cut the teeth of a gear, curved mill slots, or drill a bolt hole circle around the circumference of a part. Solid Cast Iron Construction. High Precision Indexing Plate. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Rigid & Sturdy Body. The indexing head features a long service life due to its rigid quality. It is designed with a mirror finish that is wear. The dividing head is enabled to tilt from 10 degrees below horizontal to 90 degrees vertical. And that will be convenient if you want to cut the part from a certain angle. By turning the 1st level that extrudes the pin, the pin goes into the plate and you can divide the full circle into 2, 3, 4, 6, 8, 12, or 24 divisions. The other level prevents the spindle from vibrating during machining. The high precision performance of the indexing head is achieved with indirect indexing plates A, B, and C. All divisions 2-50 can be done, but some from 51 to 380 cannot be obtained. Check the manual before setting. The MT2 tailstock gives strong support to the workpiece being machined. It is particularly useful when the workpiece is relatively long and slender. The rotary indexer is used on the tables of milling machines and other machine tools including drill presses, grinders, and boring machines. Swing: 6-1/2 (16.5 cm). Center Height: 3-15/16 (10 cm). Net Weight: 50.7 lbs (23 kg). Headstock Dimensions: 9.5″ x 7.5″ x 6.5 (24 x 19 x 16.5 cm). Tailstock Dimensions: 3.5″ x 6″ x 4 (9 x 15 x 10 cm). 1 x Dividing Head. 3 x Dividing Plates. 1 x 125 mm 3-Jaw Chuck. Solid Cast Iron Construction: Swing: 6-1/2/168 mm. The dividing head features a rigid mirror finish that is wear-resistant, a good choice for long-term use. Its delicate parts work perfectly, mathematically dividing the materials to be cut. Easy of Adjustment: The headstock of the dividing head for the milling machine can tilt from 10 degrees below horizontal to 90 degrees vertical so that you can handle the stuff of different sizes by changing its angle. High Precision Indexing Plate: The universal dividing head comes with a direct indexing plate and an interchangeable one on the head, and two replacement interchangeable ones with different numbers of holes. It’s the dividing plates that set the precise distance between cuttings. Strong Workpiece Support: The coming package also includes a tailstock that will give strong support to the long metal stick you are going to deal with, providing a more stable working condition. Versatile Application: The rotary indexer is used on the tables of milling machines and other machine tools, including drill presses, grinders, and boring machines. People Who Bought This Item Also Bought. VEVOR Compound Milling Machine Work Table 2 Axis Cross Slide Bench Drill Vise. VEVOR Milling Drilling Machine Worktable Cross Slide Table 4″ X 7.3″ Bench Table. Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate. VEVOR Tilting Milling Table Tilting Angle Milling Machine Adjustable Plate. VEVOR 8 Precision Horizontal and Vertical Rotary Table. VEVOR Indexing Dividing Head 6 3 Jaw Chuck & Tailstock for CNC Milling Machine. VEVOR Rotary Table XY Axis Rotary Table 8 3-Slot for Milling Drilling. VEVOR 6 Rotary Table Horizontal Vertical Dividing Plates for Milling Machine. AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport. VEVOR Square Air Cooled Spindle Motor 2.2KW CNC Spindle Motor 220V ER20 Collet. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. It is designed with a mirror finish that is wear-resistant and tear-resistant and looks low-profile. And that will be convenient if youwant to cut the part from a certain angle. The high precision performance of the indexinghead is achieved with indirect indexing plates A, B, and C. Alldivisions 2-50 can be done, but some from 51 to 380 cannot be obtained. The rotary indexer is used on the tables of millingmachines and other machine tools including drill presses, grinders, andboring machines. 6 / 160 mm. 4 / 100 mm. 0.28 / 7 mm. 6.5 / 168 mm. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours.

VEVOR Milling Machine Power Feed. Our power table feed brings a stable transmission ratio and high load-bearing capabilities. Take control of speed with ease using the manual lever and automatic knob. Ideal for 5/8” end shaft diameter machines and Z-axis milling machines. Experience efficiency and reliability like never before! Equipped with Gleason spiral bevel gears, our milling machine power feed ensures a stable transmission ratio, low noise output, high transmission efficiency, and excellent load-bearing capacity. With noise levels? 85dB, providing a conducive environment for your work or study without disruptions. Our power feed table mill is equipped with overload protection. In instances of rapid transmission, if there is a collision or instantaneous reversal between the tool and the workpiece, a special security mechanism safeguards the gearbox’s plastic gears and electronic components from damage. Our compact and lightweight power table feed is easy to install and operate. The control panel features clear functions, making the operation straightforward. Additionally, we provide a detailed installation and user manual, ensuring you have all the information you need to operate effectively. Our power feed milling machine comes with 1 x copper gear, 1 x install the retainer plate, 2 x limit blocks, 4 x fixing screws, 1 x limit switch waterproof box, 2 x limit switch springs, 15 x adjusting shims, 1 x extended shaft, 11 x extended shaft springs, 1 x copper gear gasket, and 1 x flat key. Ultimate High-Compatibility Solution: Our power feed table mill Includes everything needed to mount on most knee-type mills with a 5/8” end shaft diameter that shares the same installation pattern, such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, and others. Infinitely Variable Speed Control: With the continuously variable speed knob, you can adjust the speed according to your needs. Our milling machine power feed offers a rated torque of 450 in-lb(50.7 NM), a maximum speed of 200 RPM, a maximum feed rate of 965 mm/min, and a maximum return speed of 1385 mm/min. Highly Stable and Efficient: Featuring Gleason spiral bevel gears, our power table feed boasts stable transmission ratios, low noise, high transmission efficiency, and high load-bearing capacity. Plus, it comes with a special security device that protects the gearbox plastic gears, and electronic components from damage in the event of tool collision or sudden reversal during rapid transmission. Easy to Use, Manual or Automatic: Our power feed milling machine offers two different speed adjustment modes: manual and automatic. With manual control buttons, you can adjust the speed as needed. Alternatively, set the device to automatic constant speed mode for hands-free operation, making your milling tasks a breeze. Designed for Z-axis Direction: This power feed woodworking enables smooth movement in the Z-axis direction. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices.

VEVOR Milling Machine Power Feed. Our power table feed brings a stable transmission ratio and high load-bearing capabilities. Take control of speed with ease using the manual lever and automatic knob. Ideal for 5/8” end shaft diameter machines and X-axis/Z-axis milling machines. Equipped with Gleason spiral bevel gears, our milling machine power feed ensures a stable transmission ratio, low noise output, high transmission efficiency, and excellent load-bearing capacity. With noise levels? 85dB, providing a conducive environment for your work or study without disruptions. Our power feed table mill is equipped with overload protection. In instances of rapid transmission, if there is a collision or instantaneous reversal between the tool and the workpiece, a special security mechanism safeguards the gearbox’s plastic gears and electronic components from damage. Our compact and lightweight power table feed is easy to install and operate. The control panel features clear functions, making the operation straightforward. Additionally, we provide a detailed installation and user manual, ensuring you have all the information you need to operate effectively. Our power feed milling machine comes with a set of sturdy metal parts that are built to last, including 1 x copper gear, 1 x install the retainer plate, 3 x fixing screws, 2 x limit switch springs, 15 x adjusting shims, 1 x bearing inner ring, and 1 x copper gear gasket. Here we will provide you with 3 types of Power Feed for your option: X-Axis 450 in-lb, X-Axis 150 in-lb, Z-Axis 450 in-lb. Ultimate High-Compatibility Solution: Our power feed table mill Includes everything needed to mount on most knee-type mills with a 5/8” end shaft diameter that shares the same installation pattern, such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, and others. Infinitely Variable Speed Control: With the continuously variable speed knob, you can adjust the speed according to your needs. Our milling machine power feed offers a rated torque of 450 in-lb(50.7 NM)/150 in-lb(16.9 NM), a maximum speed of 200 RPM, a maximum feed rate of 965 mm/min, and a maximum return speed of 1385 mm/min. Highly Stable and Efficient: Featuring Gleason spiral bevel gears, our power table feed boasts stable transmission ratios, low noise, high transmission efficiency, and high load-bearing capacity. Plus, it comes with a special security device that protects the gearbox plastic gears, and electronic components from damage in the event of tool collision or sudden reversal during rapid transmission. Easy to Use, Manual or Automatic: Our power feed milling machine offers two different speed adjustment modes: manual and automatic. With manual control buttons, you can adjust the speed as needed. Alternatively, set the device to automatic constant speed mode for hands-free operation, making your milling tasks a breeze. Designed for X-axis Direction: This power feed woodworking enables smooth movement in the X-axis/Z-axis direction. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices.

6 / 160 mm Dividing Head for Milling Machine. MT3 Headstock Taper & Complete Set & Simple Operation. Semi-Universal Dividing Head is a simple Index Center and can be used for direct and indirect dividing. Complete the gear, face, flute processing, and no need accessories, the same construction as universal type. With rotary indexer, the 24 quick-dividing holes can complete BS-2A 2,3,4,6,8,12,24 division indexing. Attache 3 dividing plates and the dividing head indirect dividing in any division indexing 2-50.51-380. Rich Dividing Head Set. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Vertical & horizontal milling machine with headstock chuck for the lathe. Swing: 6-1/2″ / 168 mm, Center Height: 5″ / 128 mm. Our universal dividing head features ruggedly constructed hardened and ground worm gear. The reduction ratio is 1:40. Designed with a rotary table and indexing chuck for convenient operation, the 24 quick-dividing holes can complete 2, 3, 4, 6, 8, 12, 24 division indexing. The ball-bearing of this indexing head is of high precision and smooth turning. An extra dead center is provided for rapid use. Our rotary indexer comes with 3 dividing plates of different sizes. The tool has easy indexing of divisions from 2 to 50, with most numbers up to 380. The rotary indexer is ideal for various uses in milling, grinding, and drilling work. Chuck Diameter: 6 / 16 cm. Spindle Speed: 2500 RPM. Swing: 6-1/2 / 16.8 cm. Center Height: 5 / 12.8 cm. Reduction Ratio: 1:40. Net Weight: 77 lbs / 35 kg. Headstock Dimensions: 4.4″ x 7.9″ x 11.8 / 11.3 x 30.2 x 21.9 cm. Tailstock Dimensions: 4.5″ x 6.6″ x 5.2 / 11.5 x 17 x 13.4 cm. 1 x 6 Dividing Head. 2 x Dividing Plates. 3 x 6 Chuck Jaws. 1 x Dead Center. 1 x Set of Related Accessories. Adjustable Angle: The semi-universal dividing head features a 6 3-jaw chuck, Spindle Speed: 2500 RPM. The headstock is adjustable from the horizontal position to 90 degrees upward. Free 3 more jaws for 6 chuck. Solid Construction: This indexing head is made of HT 200 to be a long life. A rigid frame provides high accuracy with little backlash for a smooth rotation. Precise & Accurate: Dividing head milling machine with laser engraving scales. The 24 quick-dividing holes can complete 2, 3, 4, 6, 8, 12, 24 division indexing. One circle for 360 degrees, one scale stands for 1 degree. MT3 Tailstock Adjustable: Huge live center for heavy-duty workpieces. Ball-bearing precision; turns smoothly. The model of the tailstock is MT3. One extra dead center is included. Rich Dividing Head Set: 3 dividing head index plates are attached along with the dividing head for indirect dividing in any division indexing 2-50, 51-380 except prime numbers and specific other numbers. People Who Bought This Item Also Bought. VEVOR BS-0 Semi 5 Indexing Dividing Head 3-Jaw Chuck Tailstock For CNC Milling. VEVOR Compound Milling Machine Work Table 2 Axis Cross Slide Bench Drill Vise. VEVOR 8 Precision Horizontal and Vertical Rotary Table. Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate. VEVOR Tilting Milling Table Tilting Angle Milling Machine Adjustable Plate. VEVOR Rotary Table XY Axis Rotary Table 8 3-Slot for Milling Drilling. VEVOR 6 Rotary Table Horizontal Vertical Dividing Plates for Milling Machine. VEVOR Square Air Cooled Spindle Motor 2.2KW CNC Spindle Motor 220V ER20 Collet. VEVOR Milling Drilling Machine Worktable Cross Slide Table 4″ X 7.3″ Bench Table. VEVOR 2.2KW Air Cooled Spindle Motor for CNC Router Milling Engraving 4 Bearings. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. 4 / 100 mm. 6 / 160 mm. 0.28 / 7 mm. 0.83 / 21 mm. 6.5 / 168 mm. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours.

6 / 160 mm Dividing Head for Milling Machine. MT3 Headstock Taper & Complete Set & Simple Operation. Semi-Universal Dividing Head is a simple Index Center and can be used for direct and indirect dividing. Complete the gear, face, flute processing, and no need accessories, the same construction as universal type. With rotary indexer, the 24 quick-dividing holes can complete BS-2A 2,3,4,6,8,12,24 division indexing. Attache 3 dividing plates and the dividing head indirect dividing in any division indexing 2-50.51-380. Rich Dividing Head Set. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Vertical & horizontal milling machine with headstock chuck for the lathe. Swing: 6-1/2″ / 168 mm, Center Height: 5″ / 128 mm. Our universal dividing head features ruggedly constructed hardened and ground worm gear. The reduction ratio is 1:40. Designed with a rotary table and indexing chuck for convenient operation, the 24 quick-dividing holes can complete 2, 3, 4, 6, 8, 12, 24 division indexing. The ball-bearing of this indexing head is of high precision and smooth turning. An extra dead center is provided for rapid use. Our rotary indexer comes with 3 dividing plates of different sizes. The tool has easy indexing of divisions from 2 to 50, with most numbers up to 380. The rotary indexer is ideal for various uses in milling, grinding, and drilling work. Chuck Diameter: 6 / 16 cm. Spindle Speed: 2500 RPM. Swing: 6-1/2 / 16.8 cm. Center Height: 5 / 12.8 cm. Reduction Ratio: 1:40. Net Weight: 77 lbs / 35 kg. Headstock Dimensions: 4.4″ x 7.9″ x 11.8 / 11.3 x 30.2 x 21.9 cm. Tailstock Dimensions: 4.5″ x 6.6″ x 5.2 / 11.5 x 17 x 13.4 cm. 1 x 6 Dividing Head. 2 x Dividing Plates. 3 x 6 Chuck Jaws. 1 x Dead Center. 1 x Set of Related Accessories. Adjustable Angle: The semi-universal dividing head features a 6 3-jaw chuck, Spindle Speed: 2500 RPM. The headstock is adjustable from the horizontal position to 90 degrees upward. Free 3 more jaws for 6 chuck. Solid Construction: This indexing head is made of HT 200 to be a long life. A rigid frame provides high accuracy with little backlash for a smooth rotation. Precise & Accurate: Dividing head milling machine with laser engraving scales. The 24 quick-dividing holes can complete 2, 3, 4, 6, 8, 12, 24 division indexing. One circle for 360 degrees, one scale stands for 1 degree. MT3 Tailstock Adjustable: Huge live center for heavy-duty workpieces. Ball-bearing precision; turns smoothly. The model of the tailstock is MT3. One extra dead center is included. Rich Dividing Head Set: 3 dividing head index plates are attached along with the dividing head for indirect dividing in any division indexing 2-50, 51-380 except prime numbers and specific other numbers. 4 / 100 mm. 6 / 160 mm. 0.28 / 7 mm. 0.83 / 21 mm. 6.5 / 168 mm. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “audiyeah-1″ and is located in this country: US. This item can be shipped to United States, Canada.

• Brand: VEVOR
• MPN: CVNBTE43
• Operation: Manual
• Custom Bundle: No
• Setting Position: Horizontal/Vertical
• Chuck Diameter: 6\
• Spindle Speed: 2500 RPM
• Swing: 6-1/2\
• Center Height: 5\
• Reduction Ratio: 1:40
• Tailstock: MT3
• Net Weight: 77 lbs / 35 kg
• Headstock Dimensions: 4.4\
• Tailstock Dimensions: 4.5\
• UPC: 8085443392969

X-Axis Power Feed Kit. 0-200 RPM Rotate Speed & 450 in-lb Torque & 650 mm/min Rate. Our feed kit features a robust shell and precise components. It works efficiently on a milling machine with a 5/8 shaft end. Besides, it is designed with buttons and knobs for simple operation. Our milling machine is an excellent choice for meeting the needs of all your milling operations. Take control of your operations and get quality equipment from a name you can trust, VEVOR. High Efficiency & Precision. Low Noise & Easy Operation. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. The feed can work automatically or manually by pressing the speed control. And the circuit breaker protects the transmission gear and electronic components. The milling machine table power feed is composed of rugged aluminum. Its finish has been polished to make its surface corrosion-resistant and wear-resistant. The power feed for the mill adopts spiral bevel gears to move freely and quietly on the mill. Most mills are loud, but our mill reduces noise, even in the garage. The mill power feed is fitted out with precise bearings that ensure smooth and stable movement. Less vibration and strain enhance the efficiency of the milling machine. The power feed for the milling machine is easy to install and operate. Only a little maintenance is required to ensure consistent long-term running. The cutter feeder is an indispensable collocation for milling machines. It is suitable for rocker milling machines, drilling and boring machine, and small grinders. Voltage: 110V, 50/60 Hz. Rotate Speed: 0-200 RPM. Max Torque: 450 in-lb. Max Feed Rate: 650 mm/min. Max Return Speed: 850 mm/min. Item Weight: 16.5 lbs / 7.5 kg. Item Dimensions(L x W x H) : 6.5 x 4.5 x 13 in / 16.5 x 11.4 x 33 cm. 1 x Power Feed for Milling Machine. 8 x Adjustable Pads. 2 x Travel Stop Assemblies. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs. Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions. High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well. Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop. Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8 diameter shaft on the end. Such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, etc. Power Feed Milling Machine. 450 lbs / 204 kg. 150 lbs / 68 kg. 135 lbs / 155 kg. 0 – 200 RPM. 0 – 210 RPM. 16.5 lbs / 7.5 kg. 14.3 lbs / 6.5 kg. 13.2 lbs / 6 kg. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wulitaotaoh_9″ and is located in this country: US. This item can be shipped to United States, Canada, Germany.

• Brand: VEVOR
• MPN: AL-310SXCZDQ00000
• Model: AL-310S
• Power Source: Electric
• Voltage: 110V, 50/60 Hz
• Control: Manual
• Function: Milling
• Machine Type: Milling Machine
• Max Spindle Speed (RPM): 200 RPM
• Type: X Traverse
• Rotate Speed: 0-200 RPM
• Max Torque: 450 in-lb
• Max Feed Rate: 650 mm/min
• Max Return Speed: 850 mm/min
• Item Weight: 16.5 lbs / 7.5 kg
• Item Dimensions(L x W x H): 6.5 x 4.5 x 13 in / 16.5 x 11.4 x 33 cm
• UPC: 800000893318