We sell these brands:OSG, MISTUBISH, KYOCERA, Sumitomo, DIJET, Hitachi, Taegutec Yuzetools and so on. We are factory of Carbide milling cutter, alloy drill, thread milling cutter, turning tool holder. Thank you for your support!

Mill Machine Parts R8 Spindle + Bearings Assembly Fit BRIDGEPORT Milling US Product description: This product is a high quality R8 spindle + bearing for 3#4# milling machine. After the spindle is replaced, it can change the surface or side of the milling workpiece caused by the tool wear caused by the long wear of the spindle and the bearing clearance. Smooth, rough and uneven! Product specifications: Name: Milling R8 spindle + bearing Total length of the spindle: 545mm Head outer diameter: 46mm Spline outer diameter: 25mm D:25mm D1:20mm B:6mm Bearing position: 35mm and 30mm Packing size: 561010cm Weight: 4.2kg Scope of application: Most milling machines (3#4# milling machine) The package includes: 1X R8 spindle + bearing. NEW 1 SET BRIDGEPORT Milling Machine Parts R8 Spindle + Bearings Assembly Kit. Mill Machine Parts R8 Spindle + Bearings Assembly Fit Bridgeport Milling. This Product Is a High Quality R8 Spindle + Bearing for 3#4# Milling Machine. After the Spindle Is Replaced, It Can Change the Surface or Side of the Milling Workpiece Caused by the Tool Wear Caused by the Long Wear of the Spindle and the Bearing Clearance. Smooth, Rough and Uneven! Name: Milling R8 Spindle + Bearing. Total Length of the Spindle: 545mm. Head Outer Diameter: 46mm. Spline Outer Diameter: 25mm. Bearing Position: 35mm and 30mm. Scope of Application: Most Milling Machines (3#4# Milling Machine). 1x R8 Spindle + Bearing. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Nice and Practical, High Quality Packaging. Compact Design and Beautiful Appearance. Stable characteristic, High reliability. Durable Material, Good Quality. Creative Design, Durable, Beautiful Appearance. Easy installation, Compact Design. Stable performance, Safe to Use. Milling R8 spindle + bearing. Total length of the spindle. Most milling machines (3#4# milling machine).

Please call with any questions. We will assist you in any reasonable way to help get your items to your destination, All checks subject to bank verification. Please Call: Two Zero T hree, Five Nine Two, Eight Four Zero Two, with any questions or concerns, Thank You! You are welcome to inspect any machine by appointment. Guerrera Machine Company, LLC. Will not be held liable for any inaccurate information.

Mill Machine Parts R8 Spindle + Bearings Assembly Fit BRIDGEPORT Milling US Product description: This product is a high quality R8 spindle + bearing for 3#4# milling machine. After the spindle is replaced, it can change the surface or side of the milling workpiece caused by the tool wear caused by the long wear of the spindle and the bearing clearance. Smooth, rough and uneven! Product specifications: Name: Milling R8 spindle + bearing Total length of the spindle: 545mm Head outer diameter: 46mm Spline outer diameter: 25mm D:25mm D1:20mm B:6mm Bearing position: 35mm and 30mm Packing size: 561010cm Weight: 4.2kg Scope of application: Most milling machines (3#4# milling machine) The package includes: 1X R8 spindle + bearing. R8 Spindle with Bearings Assembly 545mm For Milling Machine Parts. Mill Machine Parts R8 Spindle + Bearings Assembly Fit Milling Usa. This Product Is a High Quality R8 Spindle + Bearing for 3#4# Milling Machine. After the Spindle Is Replaced, It Can Change the Surface or Side of the Milling Workpiece Caused by the Tool Wear Caused by the Long Wear of the Spindle and the Bearing Clearance. Smooth, Rough and Uneven! Name: Milling R8 Spindle + Bearing. Total Length of the Spindle: 545mm. Head Outer Diameter: 46mm. Spline Outer Diameter: 25mm. Bearing Position: 35mm and 30mm. Scope of Application: Most Milling Machines (3#4# Milling Machine). 1x R8 Spindle + Bear. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

Bridgeport Cross Feed Screw Assembly with Brass Nuts, New, Unused Surplus; Two available at time of listing. Price is for each.

CNC 6040/6090 Engraver 3 /4 Axis Router 3D Engraving Milling Machine 1500W/2200W. 3 Axis CNC 6040 1500W Parallel +RC. SKU:3-1.5KW6040A+3-1.5KW6040B+TS007. Notes:Please prepare a computer with DB25 parallel Interface. Suitable for PCB, wood, Plexiglass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE. This CNC 6040T machine is suitable for industry, Technology Research, Advertising Design. Arts Creation, Teaching, Student Project and Hobby Purposes. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic. MDF board, native wood, PVC, Acrylic, wood, composite board plywood. Copper and silver to engrave them into 3D/2D works etc. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate. Aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. The mini CNC router Frame is movable. The machine can connect with computer as. Other external device such as printer, scanner.. With the assist of the CNC ROUTER 6040T, your design idea will be real-time display. CNC engraving machine parameters. X, Y, Z Working Area: 600(Y)390(X)120(Z)mm. Lathe structure:6061/6063 Aluminium alloy. X axis:1204 Ball Screws. Y axis:1204 Ball Screws. Z axis:1204 Ball Screws. X axis:High intensity Chromeplate shaft. Y axis:High intensity Chromeplate shaft. Z axis:High intensity Chromeplate shaft. 1, The spindle motor must connect with the VFD. 2, It cannot directly connect with the supply voltage (AC110V). 3, Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Material:304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket. AC110 /50Hz, 5A, 1.5KW VFD. Spindle speed:24000 rpm. Max working frequency:400Hz. Principal axis collet:ER11collet, Standard configuration :6mm. Speed?? mode:By adjusting the VFD output voltage and operating frequency. Lubrication way:lubricated by high grease. Repeat accuracy:0.05mm. Spindle precision:radial beat acuities 0.03mm. Carving Instructions:G code / TAB files / nc file / NCC files. Communication interface:through parallel connection with computer. Support system:windows XP / win7. Maximum Idle speed:1500mm/min. Working Speed :50-1500mm / min (different material with different speed settings). Control unit:Toroidal transformer + PWM power supply module + TB6560 stepping motor drive. Waterproof design, very durable, anti-dirt, oil spray. Power by USB port. Dimensions: 22 x 8 x 3cm The usb self-check light, you can type the ” scroll” on the keyboard to activate it. Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A. Feed rate control: F+, F. Jog rate: J+, J. Spindle speed: speed up, slow down. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point. 1, The NEW 1.5KW water-cooled VFD is available operating for long time, which can reinforced the processing abilty of the machine and can be used toprocess aluminum alloy and hard wood. 2, water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a 25pin parallel port output. Place the contral box in a ventilated dry place where there is no dust, no moisture. Connecting the control box with the CNC machine and you computer. And make sure the plug will not come off. Correctly connect the machine with the controller. 3 Axis CNC 6040 1500W USB +RC. 3 AXIS CNC Router 6040 Engraver Engraving Mill&Drill 3D CUTTER. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the usb port driver. Suitable for PCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper. This CNC 6040 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. Like aluminum, copper and silver to engrave them into 3D/2D works etc. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin doublecolor plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. The machine can connect with computer as other external device such as printer, scanner.. Cnc engraving machine parameters. Lathe structure: 6061/6063 Aluminium alloy. X axis—1605 Ball Screws. Y axis—1605 Ball Screws. X axis—High intensity Chromeplate shaft. Y axis—High intensity Chromeplate shaft. Z axis—High intensity Chromeplate shaft. The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC220V). Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket. VOLTS, current, power: AC110 /60Hz, 5A, 1.5KW VFD. 1, Water cooled spindle motor can work longer time than air cooled motor. 2, Water cooled spindle motor has higher stability and better concentricity than air cooled motor. Spindle speed: 24000 rpm. Max working frequency: 60Hz. Principal axis collet: ER11collet, Standard configuration :6mm. Speed?? mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM. Lubrication way: lubricated by high grease. Repeat accuracy: 0.05mm. Spindle precision: radial beat acuities 0.03mm. Carving Instructions: G code / TAB files / nc file / NCC files. Communication interface: through USB connection with computer. Support system: Windows XP/Win7(32bit). Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive. Computer connection: USB port. Command code: G code. Protection: Emergency stop button. The NEW 1.5KW water-cooled VFD is available operating for long time, which can reinforced the processing abilty of the machine and can be used toprocess aluminum alloy and hard wood. Water cooling spindle works more stable and durable. High quality accurate ball Screws drive make the engrving more precision. Make sure that your computer has a USB port output. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Otherwise, It will damage the driver of the controller. Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Before turn on the machine, please check all the cable and water-cooling system to make sure they are working fine. You can enjoy making you dream with using our CNC machine now. If you have any problem. 3 Axis CNC 6040 1500W Parallel. Notes: Please prepare a computer with DB25 parallel Interface. Suitable for PCB, wood, Plexiglass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper. This 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate. PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. The mini router Frame is movable. With the assist of the ROUTER 6040T, your design idea will be real-time display. X axis–1605 Ball Screws. Y axis–1605 Ball Screws. Z axis–1204 Ball Screws. X axis–High intensity Chromeplate shaft. Y axis–High intensity Chromeplate shaft. Z axis–High intensity Chromeplate shaft. It cannot directly connect with the supply voltage (AC110V). Spindle motor:1.5 KW water cooled. Max working frequency: 400Hz. Principal axis collet: ER11collet, Standard configuration: 6mm. Speed mode: By adjusting the VFD output voltage and operating frequency. Communication interface: through parallel connection with computer. Environment: Windows XP / Win7 32bits system. Working Speed: 50-1500mm / min (different material with different speed settings). Maximum Idle speed: 0-1500mm/min. Computer connection: Parallel port. The NEW 1.5 KW water-cooled VFD is available operating for long time, which can reinforced the processing abilty of the machine and can be used to. Process aluminum alloy and hard wood. Assembling and locating the machine on steady desk well. Connecting the control box with the machine and you computer and make sure the plug will not come off. Damage the driver of the controller. The heat pump should be covered completely in the water, then turned on the electric current to. Check whether the water-cooling system working well. Installing a control software and Driveon your computer. Fllowing our manual or guideline to set uo the software. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. You can enjoy making you dream with using our machine now. 3 Axis CNC 6040 1500W USB. USB 3-Axis CNC 6040 Router Engraver 3 Rotating Axis Metal Wood Cut Machine 1.5KW. Note:We only sell machine without software. PCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper. This 6040 machine is suitable for industry, Technology Research, Advertising Design. Arts Creation, Teaching, Student Project and Hobby. It can work with various materials(metallic & non-metallic), such as: wood. Pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite. Like aluminum, copper and silver to engrave. Them into 3D/2D works etc. It can used for engraving: advertising signs, PCB, nameplates, badges. Seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double. PVC foaming board, indentation plates, signs, construction. Models, instrument panels, wooden products, etc. The machine can connect with computer. As other external device such as printer, scanner.. With the assist of the ROUTER 6040T, your design idea will be real-time. Z axis—1204 Ball Screws. Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM. The NEW 1.5KW water-cooled VFD is available operating for long time, which. Can reinforced the processing. Abilty of the machine and can be used to. High quality accurate ball Screws drive make the engrving more. Place the contral box in a ventilated dry place where there is no dust, no. Connecting the control box with the machine and you computer and make. Sure the plug will not come off. Don’t suspended the. Cable which connect the Spindle motor with axis(X, Y, Z, A). The heat pump should. Be covered completely in the water, then turned on the electric current to. Installing a control software and Drive. Before turn on the machine, please check all the cable and water-cooling. System to make sure they are working fine. We will gladly assist you. 4 Axis CNC 6090 2200W USB. 6090 router 4 Axis+2.2kw Spindle motor +VFD +USB Port Metal Wood. Engraver with tool sensor. X axis: SFU1605 Ball Screws. Y axis: SFU1605 Ball Screws. Z axis: SFU1204 Ball Screws. Router engraving machine parameters. Outside dimension: 1150x970x650mm(LxWxH). Working platform size: 1045x720mm(LxW). Frame Material: The whole machine used 6061 aluminum profiles. Feeding height:? 140mm(From base of Z axis to platform). X, Y, Z Working Area: 600x900x150mm. X axis: ø20 High intensity round rail. Y axis: SBRø20 high-strength aluminum base rails. Z axis: ø12 high-strength round rail. Stepping motor: two-phase 3A (with handwheels). Driving Power for Stepping motor: AC110, Output DC 24V, 10A. Maximum Idle speed: 1500mm/m. Working Speed: 50-1500mm/min (different material with different speed settings). Spindle motor: 2200Whigh-speed variable frequency spindle motor, ER20 chuck, matching 6mm bur. 2, Water cooled spindle motor has higher stability and better concentricity than. Variable-frequency Drive(VFD): AC110V, 2200W, 0-400Hz (built-in Control box). Drive of Stepping motor. 0-3.5A adjustable four-axis driveTB6560AHQchip, 24V power supply, 2, 4, 8, 16 Subdivision. Settings, Factory setting: 8 subdivided. Repositioning precision:? 0.05mm. Cooling method: Water cooling, Matching heat dissipation water pump. Spindle precision: Radial runout? 0.03mm. Carving command:G code/TAB file/nc/TAB /NCC/file. Communication interface: through USB PORT connect with computer. Gross weight of machine. Update function: with limit switch. Woodworking industry: sculpture, round carving, wooden handicraft processing. Advertising signs: logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. Other industries: The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry, such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter, making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet. The NEW 2.2KW water-cooled VFD is available operating for long time, which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood. Assembling and locating the Engraving machine on steady desk well. Place the control box in a ventilated dry place where there is no dust, no moisture. Connecting the control box with the Engraving machine and you computer and make sure the plug will not come off. Otherwise, it will damage the driver of the controller. You can enjoy making you dream with using our Engraving machine now. 1X main unit (Frame). 1X main unit (working base). 1X Sinal cable for A axis. 10X 47mm round head. 6X 410mm black Inner six angle screw with nut. 8X 520mm black Inner six angle screw. 4X 58mm Flat Philip’s head screw with nut and gasket. 8X 624mm BALCK FLAT Inner six angle screw. 2X six angle Wrench(3mm). 2X six angle Wrench(4mm). 1x Tools Setting Auto-Check Instrument for Engraving Machine. 4 Axis CNC 6090 2200W USB+RC. CNC 6090 router 4Axis+2.2kw Spindle motor +VFD +USB Port Metal Wood Engraver with tool sensor Package list: 1X main unit (Frame) 1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 1X USB cable 2X cutter 26mm 2X cutter 36mm 10X 47mm round head 6X 410mm black Inner six angle screw with nut 8X 520mm black Inner six angle screw 4X 58mm Flat Philip’s head screw with nut and gasket 8X 624mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual. 1x Tools Setting Auto-Check Instrument for CNC. CNC Router engraving machine parameters: Model:CNC6090GZ Outside dimension:1150x970x650mm(LxWxH). Working platform size:1045x720mm(LxW). How to use: 1. Place the control box in a ventilated dry place where there is no dust, no moisture 4. Correctly install the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current tocheck whether the water-cooling system working well. Notice:the Communication interface of the control box is USB Port, this machine can only work with Win XP 32Bit / Win 7 32Bit / Win XP 64 Bit / Win 7 64 Bit PC system. Frame Material:The whole machine used 6061 aluminum profiles Max. Feeding height:? 140mm(From base of Z axis to platform) X, Y, Z Working Area:600x900x150mm Sliding unit: X axis:SFU1605 Ball Screws; Y axis:SFU1605 Ball Screws; Z axis:SFU1204 Ball Screws Drive unit: X axis:ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails; Z axis: ø12 high-strength round rail Stepping motor:two-phase 3A (with handwheels) Driving Power for Stepping motor:AC110,240W, Output DC24V10A Maximum Idle speed:1500mm/m Working Speed:50-1500mm/min (different material with different speed settings) Spindle motor:2200Whigh-speed variable frequency spindle motor, ER20 chuck, matching 6mm bur 1, Water cooled spindle motor can work longer time than air cooled motor. Variable-frequency Drive(VFD):AC110V, 2200W, 0-400Hz(built-in Control box) tips:1, The spindle motor must connect with the VFD. 2, It cannot directly connect with the supply voltage (AC110V/220V). Drive of Stepping motor 0-3.5A adjustable four-axis drive(TB6560AHQchip, 24V power supply, 2,4,8,16Subdivisionsettings, Factory setting:8subdivided) Repositioning precision:? 0.05mm Speed:0-24000r/m Cooling method:Water cooling, Matching heat dissipation water pump Spindle precision:Radial runout? 0.03mm Carving command:G code/TAB file/nc/TAB /NCC/file Protection:Emergency stop button Communication interface:through USB PORT connect with computer support environment:Windows XP / win7 with 32bite Input Volts: AC110V Gross weight of machine :About 145kg/320lb Update function: with limit switch. Woodworking industry: sculpture, round carving, wooden handicraft processing Advertising signs: logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products Other industries: The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry, such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter, making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet. 1, The NEW 2.2KW water-cooled VFD is available operating for long time, which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood. 3, High quality accurate ball Screws drive make the engraving more precision. USB Installment HANDWHEEL Description: Waterproof design, very durable, anti-dirt, oil spray Power by USB port Dimensions: 22 x 8 x 3cm The usb self-check light, you can type the ” scroll” on the keyboard to activate it. Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A- Feed rate control: F+, F- Jog rate: J+, J- Spindle speed: speed up, slow down Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point Package Include 1 Remote controller 1 Cable. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Compact Design, Unique Appearance, High Reliability. Creative Design, Durable Material, Beautiful Appearance. Easy installation, Convenient Use, Easy Operation. Do not send to Brazil. Transportation does not include. Router Engraver Milling Machine.

Mill Machine Parts R8 Spindle + Bearings Assembly Fit Milling US Product description: This product is a high quality R8 spindle + bearing for 3#4# milling machine. After the spindle is replaced, it can change the surface or side of the milling workpiece caused by the tool wear caused by the long wear of the spindle and the bearing clearance. Smooth, rough and uneven! Product specifications: Name: Milling R8 spindle + bearing Total length of the spindle: 545mm Head outer diameter: 46mm Spline outer diameter: 25mm D:25mm D1:20mm B:6mm Bearing position: 35mm and 30mm Packing size: 561010cm Weight: 4.2kg Scope of application: Most milling machines (3#4# milling machine) The package includes: 1X R8 spindle + bearing. Manual Mill Machine Parts R8 Spindle Bearings Assembly For Bridgeport Milling. Mill Machine Parts R8 Spindle + Bearings Assembly Fit Milling Usa. This Product Is a High Quality R8 Spindle + Bearing for 3#4# Milling Machine. After the Spindle Is Replaced, It Can Change the Surface or Side of the Milling Workpiece Caused by the Tool Wear Caused by the Long Wear of the Spindle and the Bearing Clearance. Smooth, Rough and Uneven! Name: Milling R8 Spindle + Bearing. Total Length of the Spindle: 545mm. Head Outer Diameter: 46mm. Spline Outer Diameter: 25mm. Bearing Position: 35mm and 30mm. Scope of Application: Most Milling Machines (3#4# Milling Machine). 1x R8 Spindle + Bear. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

Penn Union – PW245 – W TYPE DIE INDEX 245. Penn Union – PW245 – W TYPE DIE INDEX 245 – (Pack of 1). WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.