Table travel (X, Y): 490x155mm. The item “Variable Speed Brushless DC Motor Milling and Drilling machine WMD25V 220V New” is in sale since Tuesday, June 6, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “e-lab-4u” and is located in cn,cn. This item can be shipped worldwide.

• Brand: Unbranded//Generic
• MPN: Does Not Apply

The spindle was removed and sent to wells Index and had the bearings inspected and was re ground to R8. The head was taken apart and removed the grease some put in it. (it should have oil not grease). All the parts and gears look amazing, I have pictures. The oil seal was replaced for the power down feed. And it can be done without taking the machine apart. Comes with a few R8 tooling/end mills and a Jacobs ball bearing chuck. The 6 vise was also taken apart and cleaned and painted. The item “INDEX Model 55 milling machine 1955 R8 knee mill Wells Bridgeport 220V” is in sale since Monday, December 3, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “perf0rmanceplus” and is located in Klamath Falls, Oregon. This item can’t be shipped, the buyer must pick up the item.

• Brand: Index
• Country/Region of Manufacture: United States
• Bundle Listing: No
• MPN: Model 55

Bridgeport M Head from a milling machine. This sale is for the head only, The’swivel’ or’knuckle’ is not included. Like in the last photo with all the’black’ on it. Quill is 7 B&S Brown and Sharpe. US Motor, 220 volt, ½ HP, 3-phase. SN 519610, 1200 rpm I ran this motor off a rotary phase converter and not a static phase converter. A little damage to the casting where the oilier screws in. This does not in any way impact the operation, but I want to provide full disclosure to all known flaws. Comes with the following items. Collet set (All of them are 7 B&S taper). 3/8 Cant read anything on it but looks like Bridgeport brand. I have no idea why a 21/64. 7/16 Unknown modern brand (probably Chinese). A ½ shank is tight, and a 31/64″ drill is a little loose – I think it is 1/2″ Bridgeport brand… But I cannot be certain. Jacobs brand drill chuck arbor 7 B&S to 3JT (Jacobs Taper). Jacobs brand drill chuck arbor 7 B&S to 6 JT (Jacobs Taper). Three (3) National Twist Drill and Tool Company Left Hand cut (LH) 6 flute 7/8 HSS endmills (non center cutting) Length of flute is about 1.470. One (1) National Twist Drill and Tool Company Left Hand cut (LH) 6 flute 7/8 HSS endmills (non center cutting) Length of flute is about 1.130. This one has had the end portion of the flutes cut or ground of f. Local pick-up is free. My height weight and dimensions are an estimate. I will crate, I will bring it to the depot and get it going on my end. I will crate and bring to the depot for free. Here’s a video of the head running. The item “Bridgeport Milling Machine M Head with Collets, Arbors, End Mills 1/2hp 3ph 220v” is in sale since Tuesday, January 1, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “yaker” and is located in Rocky Mount, Virginia. This item can be shipped to United States.

• Brand: Bridgeport
• Model: M Head
• Country/Region of Manufacture: United States

Recent searches

• bridgeport m head

This Brown & Sharpe No. 2 Plain Milling Machine. Is in excellent mechanical condition and was removed from a working environment. As seen in photos, this machine shows normal signs of use. This item came from a local shop that upgraded equipment and was in use prior to removal. Although we cannot perform full testing (lack of three phase power) we are confident this machine is fully functional. We urge customers to view all photos as they show overall condition, included accessories, and functionality. We will be happy to supply additional information as well as photos so p. Track Page Views With. Auctiva’s FREE Counter. The item “Brown & Sharpe No. 2 Plain Milling Machine 3HP 220V 60HZ 3PH Serial No 502-20-6″ is in sale since Wednesday, November 15, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “labtechsalescom” and is located in New Ipswich, New Hampshire. This item can be shipped to United States.

• Brand: Brown & Sharpe
• Model: No. 2
• MPN: 502-20-6

Best ALB-310 Horizontal 110V/220V power feed. Note:The shaft is 16mm. It is a very useful power feed system for the X axis to provide a smooth, variable speed drive to the travers of the table. This will enable control of the cut finish to a much greater extent than achievable by hand. With simple controls for left/right movement, auto stop in any position on the table provided by movable stops, overload protection and a fast traverse button giving 40 per min speed. Simple to fit and powered by a standard 110V/220V plug, so no wiring is required. If item Defective after 12 Month, Buyers can still send it back for repair. The item “Best price! ALSGS ALB-310 Horizontal 110V 220V power feed milling free shipping” is in sale since Friday, August 3, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “88490755″ and is located in China. This item can be shipped worldwide.

• Model: ALB-310
• Modified Item: No
• Country/Region of Manufacture: China
• Custom Bundle: No
• MPN: No have
• Brand: ALSGS
• Non-Domestic Product: No

Sign up to Newsletters. Brand New AL-310S X-Axis Power Feed Kit For Milling Machine. Our Brand New AL-310S X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). To stop jog operating, you must first turn FEED KNOB to 0(OFF) position. Then move JOG SWITCH to FEED position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Brand new power feed. X traverse (left-right travel). Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Rotate speed: 0-200 RPM. Max torque: 450 in-lb. Max feed rate: 650mm/min. Max return speed: 850mm/min. Dimension: 8 x 4.5 x 13 inches. Package size: 11.8 x 8.7 x 13.8 inches. Gross weight: 16.5 lbs. 1 x Power Feed For Milling Machine. 8 x Adjustable Pad. 2 x Tiavel Stop Assembly. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “Best price ALSGS AL-310 110V 220V Power feed for Vertical milling machine X axis” is in sale since Wednesday, October 18, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “houxiaoxi0i-4″ and is located in Ontario, California. This item can be shipped to United States, Canada, Germany.

• Brand: VEVOR
• MPN: LXQIC009
• Bundle Listing: Yes
• Model: AL-310S
• Country/Region of Manufacture: CHINA
• Voltage: 110V, 50/60Hz
• Rotate speed: 0-200 RPM
• Max torque: 450 in-lb
• Max feed rate: 650mm/min
• Max return speed: 850mm/min
• Dimension: 8 x 4.5 x 13 inches
• Gross weight: 16.5 lbs

ALSGS ALB – 310 Horizontal 110V 220V Power Feed Table For Milling Machine X Y Z. Milling machine X axis. A very useful power feed system for the X axis to provide a smooth, variable speed drive to the traverse of the table. This will enable control of the cut finish to a much greater extent than achievable by hand. With simple controls for left/right movement, auto stop in any position on the table provided by movable stops, overload protection and a fast traverse button giving 40 per min speed. Simple to fit and powered by a standard 230V three pin plug, Or 110V so no wiring is required. For ZX series mills only. Item includes: 1AL-310S Horizontal power feed. There are 110V and 220V, please leave a massage to us when place the order, if not we will send the. It includes accessories for installion. There are X, Y, Z axis power feed for choose from, we will send X aixs one if not specify. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. Your feedback very important to us, after you get your package and you are. Satisfied with our sevice. If you have any problem with your order / any questions please before leave any type of feedback. Thank you for shopping at our store. The item “ALSGS ALB 310 Horizontal 110V 220V Power Feed Table For Milling Machine X Y Z” is in sale since Friday, April 6, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “discountparts_90″ and is located in Hong Kong. This item can be shipped worldwide.

• Color: Silver
• Manufacturer: Dani
• Model: ALB-310
• Brand: Does not apply
• UPC: Does not apply
• ISBN: Does not apply
• EAN: Does not apply
• MPN: Does not apply

Vertical Knee Type Milling Machine. Number of Spindle Speeds. This machine is listed as’PARTS/REPAIR’. The motor is defective and does not power on. There is significant cosmetic wear from previous use- Dirt & dust on the base, stand, and head of the machine, rust on the surface of the table, metal shavings / debris stuck in the table slots as they have rusted together, and some minor dents in the stand. Does not include coolant pump, and the vertical adjustment handle is missing. Comes exactly as shown in pictures. All Local pickups are SUBJECT to cancellation AT OUR SOLE DISCRETION. Your transportation must EXCEED the capacity of the load, and MUST BE ABLE to have the item loaded with a Pallet. We will not unwrap an item to make it fit into your transport. We pass all of our discounts on to you. Florida is known for sudden downpours- so lets try to get everything loaded at dock height, shall we? Whs 7 – Row 30. The item “Enco Vertical Knee Type Milling Machine 9 x 42 Table 2 HP 220v 3 Ph. REPAIR” is in sale since Tuesday, April 03, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “industryrecycles” and is located in Venice, Florida. This item can be shipped to United States.

• Brand: Enco
• MPN: Does Not Apply

Sign up to Newsletters. X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage: 110 V, 60 Hz. Rotate speed: 0-200 rpm. Length: 33 cm (13 inch). Width: 20 cm (7.9 inch). Height: 18 cm (7 inch). Gross weight: 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “ALSGS 110V 220V Power Feed for Vertical Milling Machine X Y Axis AL-310SX” is in sale since Wednesday, October 18, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “world-etrade” and is located in Ontario, California. This item can be shipped to United States, Canada, Mexico, Germany.

• Brand: VEVOR
• MPN: 3fgdg00311
• Bundle Listing: Yes
• Model: AS-250-150
• Country/Region of Manufacture: CHINA
• RPM: 0~200
• TORQUE: 150LBS
• Type: X-axis
• VOLTAGE: 110 V, 60 Hz
• Gross weight: 6.5 kg(14.3 lb
• UPC: 895800908584

Bolton Tools has been in the market for over 4 years. The customer response has been tremendous! People are very happy with our machine quality and price point. We offer some of the best prices in the country, we guarantee it! We are committed to our products and our customers. About the Bolton Tools ZX1048PD-220V-1. This ZX1048PD-220V-1 is Bolton Tools’ most popular knee mill to date. Coming in at 2500 lbs, this milling machine is SOLID! The ZX1048PD is the upgraded model of the ZX1048P milling machine. The specifications are identical, but the ZX1048PD comes equipped with a 2 axis Digital Read Out, making your life a lot easier. The swivel table and very rigid castings make this the knee mill of your dreams! Rounding out the ZX1048PD are the ample table size of 10″ x 48″, the ±90° head tilt for angle milling, and the heavy duty R8 spindle. Motor: 2 HP, 220V, Single Phase. Table travel (Longitudinal): 27. Table size:10″ x 48″. Table travel (cross): 15. Spindle to table: 18. Spindle to column: 20. T-slot: 3 on 2 1/2″ centers, 5/8″ wide. If you have any questions regarding our products or services, please give us a chance for correction. Please do not leave a negative or neutral feedback. We will do our best to fix it. We care about our customers, and we strive to bring you the best customer experience ever. You will receive a response within 24 hours. Feed Back: If you are considering leaving negative or neutral feedback, please give us the opportunity to resolve the issue first. We will choose the appropriate carrier, according to the dimensions and weight of the product and recipient address. Our customer’s satisfaction is our main concern. All of our products are in brand new condition. The item “10 x 48 Vertical Knee Milling Machine Mill Drill with Power Feed and DRO 220V” is in sale since Thursday, February 01, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “boltontools” and is located in Cerritos, California. This item can be shipped to United States.

• Brand: Bolton Tools
• MPN: PM-727-M
• Model: ZX1048PD-220V-1