All wording in this sale is 100% and should be considered in total when determining value. You can return this item for up to 30 days. Become a maker, expand your shop tooling, your options are limitless with this machine. Includes all you see and more. Travel is 10″ x-axis, 14″ y-axis, 6 z-axis (adjustable), and rotary a-axis ER32 spindle. HEAVY 1/2″ Thick 12×24″ Steel Bed (machined) w/steel footers. 2 Steel tube gantry. 2 1×13 steel rails on THK HSR25H bearing blocks. 25 pitch leadscrew (x-axis). 1 10 1.5mm pitch (z-axis). 1 18 10mm pitch precision ballscrew (y-axis). 2 Nema 23 high performance steppers (x and a-axis). 2 Nema 23 steppers (y and z-axis) (more than adequate). 1 1″x10″ rail and THK HSR25H bearing for counter-weight (z-axis). Rotary axis with ER32 collet spindle. Water cooled main spindle 10k RPM ER11 collet with pump and frequency drive included. 3 axis drivers are DM556 and 1 is ST330 v3. Power supplies included are 24V 15amp and 12 volt 50 amp. 1 Electronic touchscreen power control station, independently control 7 120v outlets. Dial Indicator w/Magnetic base plus 1 micro base. 4 Limit switches included +1 mounted switch for z-axis. Rigid z-axis made from structural aluminum and beefy mounting bracket all on THK HSR25H bearings. Rear counterweight relieves weight from leadscrew. Also included but not fully pictured is the TOOLING w/ Case. All tooling is new or like new. 1 3 flute 3/8″ endmill with 1.5″ EFL (can only fit rotary collet) carbide. 1 5/16 endmill for wood only 2-flute. 3 1/8 engraving 30-deg included carbide. 14 1/8″ carbide endmills 1/2″ EFL. 2 1/8 carbide ballnose endmill. 1 1/4″ x 3″ EFL 6 OAL Carbide Long Reach Endmill. 1/8, 1/4, 3/8, 1/2, 5/8 + whatever size is used for ring mandrel (included) graduated sizing universal ring mandrel for rotary. 1/8, 1.5-7mm set. 3 electrical connections for drivers. 3 misc lathe turning tools. Replacement bearings for leadscrews/ballscrew bearings. 5 gallon bucket and tubing for coolant fluid, + industrial submergible pump. Machine was disconnected when last moved, you will need to re-wire the controllers to Grbl board and drivers. There is a 20# piece of titanium shown mounted to the counterweight mechanism which is not included! Approximately 20 pounds will be needed to mount to the rear counterweight to compensate for the headweight. Check out my other items listed. I’m adding more every day! This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “chris_crafter” and is located in this country: US. This item can be shipped to United States.

• Control: CNC
• Machine Type: Milling Machine

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices – Fast & Easy. 31.49″ X 21.65″ Y Matsuura ES800V 4-Axis VERTICAL MACHINING CENTER, G-Tech840DIs. 31.49″ X Axis 21.65″ Y Axis Matsuura ES800V 4-Axis VERTICAL MACHINING CENTER, G-Tech840DIs 5Axis Cnt. Ref # : 161611 iammdna XVMCTR. MATSUURA FOUR AXIS VERTICAL MACHINING CENTER. MODEL: ES-800V, MFG: 2004. 45.27″ x 21.65″ 1150mm x 550mm. TABLE SURFACE TO SPINDLE……….. 5.9″ – 25.59″ 150mm – 650mm. DISTANCE SPINDLE CENTER TO COLUMN.. 40 – 20,000 RPM. 187 Nm/1,120 min. X & Y AXIS………………….. 3.77/6.88 96/175mm. MATSUURA G-TECH 840DIs FOUR AXIS CONTROL. KOMA FOURTH AXIS ROTARY TABLE. HIGH PRESSURE COOLANT THRU SPINDLE 1000 PSI. 15/22 KW SPINDLE MOTOR. INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machineryvaluesinc” and is located in this country: US. This item can be shipped to North, South, or Latin America.

• Brand: Matsuura
• Machine Type: VERTICAL MACHINING CENTERS. VMC’s
• Model: ES800V 4-Axis
• MPN: ES800V 4-Axis

5,000 RPM Tapping Speed. HRT 160 rotary table. Thru tool air blast. Thru spindle coolant (300 psi). WIPS- Renishaw probing system. Coordinate rotation & scaling. The item “Haas DM-2 4-Axis CNC Vertical Drill/Tap Center” is in sale since Wednesday, September 15, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machwksinc2006″ and is located in Belgium, Wisconsin. This item can’t be shipped, the buyer must pick up the item.

• Model: Haas DM-2 4-Axis CNC
• Modified Item: No
• Spindle Horsepower: 15 HP
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Machine Type: Vertical Milling Machine
• Table Length: 34″
• Max Spindle Speed (RPM): 15000
• Model Year: 2016
• Power Source: Electric
• X-Axis Travel Bed: 28″
• Y-Axis Travel Bed: 16″
• Z-Axis Travel Bed: 15.5″
• MPN: Does Not Apply
• Spindle Taper: #40
• Function: Drilling
• Brand: Haas
• Table Width: 15″
• Control: CNC

2019 Haas VF-3YT/50 4-Axis CNC Vertical Machining Center LOW HOURS. Haas 4 axis HSA6 rotary table. 300 PSI coolant thru spindle. High Speed Machining Option. The item “2019 Haas VF-3YT/50 4-Axis CNC Vertical Machining Center, withRotary Table” is in sale since Tuesday, June 1, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machinerynetwork” and is located in Los Angeles, CA. This item can’t be shipped, the buyer must pick up the item.

• Model: VF-3YT / 50 4-Axis
• Spindle Horsepower: 30.0 hp
• Machine Type: Machining Center
• Max Spindle Speed (RPM): 7500 rpm
• Model Year: 2019
• X-Axis Travel Bed: 40 in
• Y-Axis Travel Bed: 26 in
• Z-Axis Travel Bed: 25 in
• Spindle Taper: CT-50
• Brand: Haas
• Control: CNC

This is a USED HAAS HS-2RP 4-Axis Horizontal Machining Center with a dual pallet changer system that has a 20″x20″ pallet size capacity & 3′ cube. It has 38″ of travel in the X-Axis, 35″ in the Y-Axis and 31 in the Z-Axis with a CAT-40 spindle & 60+1 position automatic tool changer. Table load capacity is 1200 lbs. And maximum tool weight is 12 lbs. With a maximum workpiece height of 43. Motor is 20 H. With a maximum spindle speed of 7500 RPM’s and is 240 Volt, 3-Phase. It features rapid traverse rates of 710 IPM, coordinate rotation & scaling, full 4th axis rotary table, quick code programming, chip augur conveyor, 8 MB programming memory, 3.5 floppy disc and all available manuals. In addition, it has part probing, tool measurement, vertical holding fixture with 2 Kurt vises, coolant filtering system, aluminum tombstone with multiple mounting capabilities, multiple work offsets and much more! Lastly a DNC 16-port computer with keyboard, mouse & monitor. Serial number is 51074, which is a 2001 machine. E b a y Stores And check out our website with over 300,000 items in stock! It is fully interactive and will show you current pricing and stock availability on thousands of items! Or register today & open an account to place orders, print statements, expedite orders and more! Also listed will be our toll free telephone and fax numbers for your convenience. Get your copy of our 450 page T&S Catalog, with listings of popular items from all the companies we represent. Direct Links to all our vendors which include some of the top names in the industry; Kennedy, OSG, Guhring, Clausing, Jet, Precision Twist-Dormer, Wilton, Norton, Starrett, Allied, Mitutoyo, YG-1 Keo, Brown & Sharpe and Jacobs, just to name a few! WE SPECIALIZE IN CUTTING TOOLS! Hundreds of decimal reamers, including over and under size metric reamers from 1mm to 20mm….. Hundreds of special taps from #000 to 4, endmills, toolholders, abrasives, fasteners, machinery and much more. Give us a call! The item “USED HAAS 4-Axis HS-2RP Horizontal CNC Machining Center with Tombstone & Vises” is in sale since Monday, January 25, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tstoolsupplycompany” and is located in Holland, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Model: HS-2RP
• Spindle Horsepower: 20 H.P.
• Country/Region of Manufacture: United States
• Machine Type: Machining Center
• Max Spindle Speed (RPM): 7500
• Model Year: 2001
• X-Axis Travel Bed: 38″
• Y-Axis Travel Bed: 35″
• Z-Axis Travel Bed: 31″
• Spindle Taper: CAT-40
• Function: 4-Axis CNC
• Brand: Haas
• Control: CNC
• Voltage: 240 Volt 3-Phase

This a industrial grade gantry CNC router used for precision production work. It has 4-axes accomplished by the CNC rotary indexing table. Additional holding fixture for a Porter Cable 3.25 HP router included. Includes power supply, driver, cables, misc. Machine stand/table is included. Clamping area 34 depth x 30 wide. Travel 20″ x 21.5″. The item “CNC Techo Isel Router 4-axis and rotary table” is in sale since Tuesday, June 16, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Routers”. The seller is “joebono” and is located in Ardmore, Pennsylvania. This item can be shipped to United States.

• Machine Type: 4 Axis Router Machine
• Brand: Techo Isel
• Power Source: Electric
• Control: CNC

#FV-1300SE FEELER 4-AXIS CNC VERTICAL MACHINING CENTER. New 1999, Serial No. 12 Chuck 4th Axis. Table Dimensions (Overall), W x L……. 24″ x 55.9″. Table Longitudinal Travel (X-Axis)…… Saddle Cross Travel (Y-Axis)………… Quill Vertical Travel (Z-Axis)………. Spindle Nose to Table, Maximum………. Spindle Nose to Table, Minimum………. 50 to 8000 RPM. 04 to 157 IPM. Rapid Traverse Rates, X & Y…………. Rapid Traverse Rate Z-Axis………….. NOTE: Machine Appears To Be In Very Good Condition. However Battery Back-Up In Control Has Gone Down. ALL MACHINES/EQUIPMENT SUBJECT TO PRIOR SELL. The item “FV-1300SE FEELER 4-AXIS CNC VERTICAL MACHINING CENTER #26554″ is in sale since Tuesday, September 12, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mohawkmachinery” and is located in Cincinnati, Ohio. This item can be shipped to United States.

• Make: FEELER
• Type: CNC, Vertical
• Highest Spindle Speed (RPM): 7501 – 10000
• Model: FV-1300SE
• Table Length: 40” – 59.9”
• Model Year: 1999
• Serial Number: VNEN025
• Control Type: MITSUBISHI CNC CONTROL
• X-Axis Travel Bed: 41” – 60”
• Y-Axis Travel Bed: 21” – 25”
• Z-Axis Travel Bed: 16” – 20”
• Table Width: 20” – 24.9”

1999 Fadal VMC4020 4-axis. Condition is used, under power. 40 x 20 travels, CAT-40, 4th axis rotary indexer included, usb drive for loading programs. The item “1999 Fadal VMC4020 4-axis” is in sale since Monday, November 4, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “fttmfg” and is located in Rochester, New York. This item can’t be shipped, the buyer must pick up the item.

• Brand: Fadal
• Model Year: 1999
• Model: 4020
• Max Spindle Speed (RPM): 7501 – 10000
• Voltage: 220 V
• MPN: VMC4020 HT

1999 Okuma MX-55VA 4-Axis CNC Machining Center. In excellent condition both working & cosmetically. Super Heavy-Duty Okuma box way machine loaded with features including a full 4th axis 12 Tsudakoma rotary table & tailstock. Upgraded USB ->DNC Port, Chip Conveyor, Remote Jog & Much more! Spindle & axes on this machine run super quiet. Check out the video below of the machine under power. Everything on this machine has been tested and is in 100% working condition.. This inside enclosure on this machine was professionally repainted with a special 2-part poly paint that will last. This was no slouch paint job. Rohner Machinery does not broker equipment. All machines are inspected & tested by our service techs to insure that all features & functions are in working condition. Check out the short video below of the machine under power. OKUMA MX-55VA CNC VMC DEMO. Okuma MX-55VA CNC Vertical Machining Center w/4th Axis. 41.3″ / 22″ / 17. 51.2″ x 22″. Table surface to floor level. Spindle to table distance (max). Cutting Feed Rate (max). X/Y Rapid Feed Rate. Z Rapid Feed Rate. 114″ x 114″ x 114H. Tsudakoma 12 4th Axis Rotary Table w/ Riser Blocks. (28″ Swing) 14″ to centerline. 4th Axis Matching Tailstock. 48 Pocket Toolchanger Option. USB to DNC to CNC Module. Chip Conveyor & Coolant Tank. The above information is to the best of our knowledge from sources deemed reliable, but should be verified at the time of inspection to confirm accuracy. We will help load small items at no charge. Hours: M-F 7:30AM – 4:30PM Saturday by appointment only. By Purchasing equipment from Rohner Machinery Sales, Inc. All Prices are in U. All proposals and acceptances of orders are made with the mutual understanding that orders are not subject to cancellation, and that a deposit is REQUIRED within 7 calendar days or this invoice is invalid. If a hold is desired, a 10% deposit is required to hold machines for up to 30-days. Deposit is non-refundable 14-days after receivable. In no event shall RMS be responsible or liable for special or consequential damages. MACHINE USE & SAFETY. The free listing tool. The item “OKUMA MX-55VA Full 4-Axis CNC Vertical Machining Center with Rotary Table. 40×20″ is in sale since Wednesday, June 5, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rohnermachinery” and is located in Fullerton, California. This item can be shipped worldwide.

2005 Haas VF-2SS 4-Axes CNC Vertical Machining Center. In absolute excellent condition both working & cosmetically. Super smooth spindle & axes traverse on this machine. This is a full 4-axes machine ready to make parts. This machine is loaded with all the bells & whistles including an HRT-210SP 8.25 4th-Axis rotary table, 12K RPM, Rigid Tapping, Chip Auger and lots more options listed below. Everything on this machine is in 100% working condition and comes loaded with features. This Haas VF-2 vertical machining center has 30″ x 16″ x 20 (762 x 406 x 508 mm) travels and is built utilizing vibration-damping cast-iron components. The Haas VF-2SS is a rugged, small-footprint vertical machining center that yields reliability and accuracy in a small-framed machine. This VF-2 has a 40-taper cartridge spindle driven by a 30 hp. Rohner Machinery does not broker equipment. All machines are inspected & tested by our service techs to insure that all features & functions are in working condition. Check out the short video below of the machine under power. HAAS VF-2SS 4-AXES CNC VERTICAL MACHINING CENTER DEMO. FOR SALE AT ROHNER MACHINERY – YouTube. Haas VF-2SS 4-Axes CNC Vertical Machining Center. Side Mount Tool Changer. Spindle Nose to Table min/max. 94″ x 96″ x 102. Haas HRT-210SP 8.25 4th Axis Rotary. Coordinate Rotation & Scaling. M19 Spindle Orientation P & R Codes. Chip Auger & Conveyor. 30-HP Vector Drive Spindle. High Speed Side Mount ATC. The above information is to the best of our knowledge from sources deemed reliable, but should be verified at the time of inspection to confirm accuracy. We will help load small items at no charge. Hours: M-F 7:30AM – 4:30PM Saturday by appointment only. By Purchasing equipment from Rohner Machinery Sales, Inc. All Prices are in U. All proposals and acceptances of orders are made with the mutual understanding that orders are not subject to cancellation, and that a deposit is REQUIRED within 7 calendar days or this invoice is invalid. If a hold is desired, a 10% deposit is required to hold machines for up to 30-days. Deposit is non-refundable 14-days after receivable. In no event shall RMS be responsible or liable for special or consequential damages. MACHINE USE & SAFETY. The free listing tool. The item “2005 HAAS VF-2SS Full 4-Axis CNC Vertical Machining Center with HRT-210 Rotary Tbl” is in sale since Monday, January 21, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rohnermachinery” and is located in Fullerton, California. This item can be shipped to United States.