Isel Automation EP-1090 3-axis machine (Davinci) CNC Router. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “m28turbo” and is located in this country: US. This item can be shipped to United States.

• Brand: Isel Automation
• Function: Milling
• Control: CNC
• Machine Type: Milling Machine

This FlashCut CNC 4-Axis Milling Machine looks to be in decent cosmetic condition, showing some signs of wear. Among other things, the system feature a FlashCut FCS-3182P-01 CNC Servo Controller, a FlashCut 501A Signal Generator, a Systro Isel FC 1200-D Spindle Motor Controllers, and a Menzel Metallchemie Valve Assembly. I do not have the key for the base unit, and I was unable to test it to power up, but the other controllers powered up, as shown. The buttons on the front of the main housing unit are somewhat damaged, as shown. I had to unscrew the cover in order to open the enclosure. Approximate overall unpacked dimenions: 48″L x 40″W x 38H. No software, power cords, or other accessories are included unless stated above. The unpacked weight of this item is 428 pounds. Is there a Dock or Forklift available? The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatory agencies. Outback Equipment Company Gilroy, California. Listing and template services provided by inkFrog. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “outback6″ and is located in this country: US. This item can be shipped to United States.

• Machine Type: Milling Machine
• Brand: FlashCut CNC

CNC 4 AXIS MILLING ENGRAVING MACHINE. MACH 3 SOFTWARE-LAZY CAM. The machine originally made by Isel Techno in Germany. Controller board and drives have been replaced and converted for using Mach3 software. Item appears to be lightly used, s ign of minor s cratches, dings, scuff… Fully tested, excellent working condition. Machine : H:24″ D: 24″ W:20. Travel: X 8.0″ Y: 7.0″ Z: 4.0. Slot Table 9.0″x 16.0″. 7 pre-installed Mach3 software for setup and testing, ready to use. Rotary Stage with Sherline 3 jaw chuck. Makita Router High Power Motor & wrench set. Power cable and USB cable. Please note: Stand as seen in photo is not included. The item “Techno Isel CNC 4 Axis Milling Engraving Machine” is in sale since Wednesday, December 9, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “greatest_choice” and is located in Manassas, Virginia. This item can’t be shipped, the buyer must pick up the item.

This a industrial grade gantry CNC router used for precision production work. It has 4-axes accomplished by the CNC rotary indexing table. Additional holding fixture for a Porter Cable 3.25 HP router included. Includes power supply, driver, cables, misc. Machine stand/table is included. Clamping area 34 depth x 30 wide. Travel 20″ x 21.5″. The item “CNC Techo Isel Router 4-axis and rotary table” is in sale since Tuesday, June 16, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Routers”. The seller is “joebono” and is located in Ardmore, Pennsylvania. This item can be shipped to United States.

• Machine Type: 4 Axis Router Machine
• Brand: Techo Isel
• Power Source: Electric
• Control: CNC

Techno DaVinci CNC Milling Machine. Outside dimensions: 46w x 53 d x 78 h. This machine will need a PCI Express Interface Card to run. It will also need a Computer. In the last photo is a quote we received for both. You NEED the interface card. You can use your own computer instead of purchasing the one in the quote picture. We carry the Rare and Hard to find items. The item “Techno Isel DaVinci CNC Milling Machine” is in sale since Thursday, December 12, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “precisionwarehouse” and is located in Paso Robles, California. This item can be shipped to United States.

• Modified Item: No
• Country/Region of Manufacture: Germany
• Machine Type: Milling Machine
• Model Year: Unknown
• Power Source: Electric
• Function: Milling
• Brand: Techno Isel CNC
• Control: CNC

CNC 4 AXIS MILLING ENGRAVER MACHINE. MACH 3 SOFTWARE-LAZY CAM. The machine original made by Isel Techno in Germany. Controller board and drives have been replaced and converted for using Mach3 software, rotary device included. Item appears to be lightly. Ign of minor s. Fully tested, excellent working condition. Machine : H:24″ D: 24″ W:20. Travel: X 8.0″ Y: 7.0″ Z: 4.0. Slot Table 9.0″x 16.0″. 7 pre-installed Mach3 software for setup and testing, ready to use. Rotary Stage with Sherline 3 jaw chuck. Makita Router High Power Motor & wrench set. Power cable and USB cable. Please note: Stand as seen in photo is not included. Ou are responsible to arrange. The item “TECHNO ISEL CNC 4 AXIS MILLING ENGRAVER MACHINE MACH 3 SOFTWARE” is in sale since Wednesday, January 2, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “greatest_choice” and is located in Manassas, Virginia. This item can’t be shipped, the buyer must pick up the item.

Isel techno cnc mill, super precise and quite robust, all ball screws very good quality little machine, comes with cnc pro software or can run on mach as well. The item “Isel Techno Bench Top CNC Mill” is in sale since Thursday, June 7, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “yaoxili_0″ and is located in Salt Lake City, Utah. This item can’t be shipped, the buyer must pick up the item.

CNC 4 AXIS MICRO MILLING ENGRAVER. Micro Milling Machine appears to be lightly. Used , almost new condition , supper clean , nice cosmetic. Controller have been converted to USBCNC “4 AXIS” for very friendly and easy to use Mach3 Software. PC pre-loaded Mach3 software , plug and play “USB cable provided”. Fully tested, Excellent working condition, there are minor scratches , dings due to normal used previously. Enclosure: H:28″ D: 26″ W:24. Travel: X 11.0″ Y: 7.0″ Z: 5.0. Slot Table 10″x 20″. Include : Micro Milling machine , Dell Laptop 14 Win7 Pro. Cables and Mach3 software(lisenced). Adjustable speed spindle motor come with collet set , 4th axis Rotary , Bison 4.0 3-jaw self center chuck. But you are arrange. The item “ISEL TECHNO CNC 4 AXIS MICRO MILLING ENGRAVER MACH3 SOFTWARE” is in sale since Tuesday, October 20, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “greatest_choice” and is located in Manassas, Virginia. This item can’t be shipped, the buyer must pick up the item.

Plugged in machine, and it starts fine. In good cosmetic condition. A flat rate of $150.00 will apply to this listing for the 48 lower united states.The item “Isel Automation Drilling and Milling Compound Sliding Table / Router” is in sale since Thursday, April 16, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “surplussalvation” and is located in Little Rock, Arkansas. This item can be shipped to United States.

• Brand: Isel Automation
• Model: 242504
• MPN: unknown

Sign up for our newsletter! Isel automation drilling and milling compound sliding table. The cosmetic condition of this item is good. Some scuffs on the bottom and sides. No major dents, scratches or dings. This item was tested. When plugged in the motor functions well at various speeds buttons seem to function well also. This listing includes isel automation drilling and milling compound sliding table. C2 management 351 station rd, suite 8 berryville, va 22611. If you think an accessory should be with this item, and it is not pictured or not mentioned, it is not included. Complete terms & conditions. This listing was sourced by.The item “Isel Automation Drilling and Milling Compound Sliding Table” is in sale since Friday, March 20, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tryc2″ and is located in Berryville VA 22611. This item can be shipped to United States.

• Brand: Isel Automation
• Model: unknown
• MPN: unknown