Table Size – 30″ x 18″ Table Travel X-Axis – 25″ Saddle Travel Y-Axis – 20″ Head Travel Z-Axis – 20.5″ Throat Distance, Spindle to Column – 20″ Maximum Table Load – 750 Lbs. Spindle Motor (1 min / 30 min) – 15 / 10 HP Spindle Speeds – 100 to 8000 RPM Spindle Taper – CT40 Rapid Traverse (XY / Z) – 1000 / 800 IPM Feedrate Range. 1 to 300 IPM Tool Changer – 16 Pocket Double Arm Tool Change Time – 3.5 Seconds Max Tool Diameter / Length / Weight – 4″ / 12″ / 15 lbs. Floor Space Requirement – 73″ x 80″ Machine Weight, Approx – 8500 Lbs. Troyke DL-9-B 4th Axis Table Centurion 7 Conversational Control Color LCD with 3D Graphics Front Panel Handwheel 3½ Floppy Drive Rigid Tap Double Arm Auto Tool Changer Box Ways Automatic Metered Lubrication Flood Coolant. Offered on consignment from customer floor. Located in Orville OH. Runs everyday and includes 9 Troyke 4. Y axis does have some noise and they are complaining of it losing accuracy/repeatability/cutting circles. Offered as is with any and all faults. Available in March to coordinate load-out with onsite riggers during shop move.

4 Axis 1500W VFD. 4 Axis 2200W VFD. Spindle motor: 2200W high-speed variable frequency spindle motor, ER11 chuck, matching 6mm bur. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point.

4 Axis 1500W VFD. 4 Axis 2200W VFD. Spindle motor: 2200W high-speed variable frequency spindle motor, ER11 chuck, matching 6mm bur. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point.

CNC Router 2200W VFD Milling Engraving Machine 6090 4-Axis Cutting &Handwheel. Waterproof design, very durable, anti-dirt, oil spray. Power by USB port. Dimensions: 22 x 8 x 3cm. The usb self-check light, you can type the ” scroll” on the keyboard to activate it. Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A. Feed rate control: F+, F. Jog rate: J+, J. Spindle speed: speed up, slow down. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point. 4 Axis 1500W VFD. CNC Router engraving machine parameters. Outside dimension:1150970650mm(LWH). Working platform size:1045720mm(LW). The whole machine used 6061 aluminum profiles. Feeding height:? 140mm(From base of Z axis to platform). X, Y, Z Working Area:900(Y)600(X)140mm(Z). Y axis:SFU1605 Ball Screws. Z axis:SFU1204 Ball Screws. X axis:ø20 High intensity round rail. Y axis: SBRø20 high-strength aluminum base rails. Z axis: ø12 high-strength round rail. 57 two-phase 3A (with handwheels). Driving Power for Stepping motor. AC110, 240W, out put:DC24V10A. Maximum Idle speed:1500mm/min. Working Speed :50-1500mm / min (different material with different speed settings). Spindle motor:1500W high-speed variable frequency spindle motor, ER11 chuck, with 6mm collet. 1, The spindle motor must connect with the VFD. 2, It cannot directly connect with the supply voltage (AC110V/220V). 3, Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Drive of Stepping motor:0-3.5A adjustable four-axis drive. (TB6560AHQ chip, 24V power supply, 2,4,8,16 subdivision can be set, factory settings 8 subdivision). Repositioning precision:? 0.05mm. Spindle precision:Radial runout? 0.03mm. Carving command:G code / TAB file / nc file / NCC file. VFD:AC220V, 1500W, 0-400Hz (built-in control box). USB Control box parameters. Protection:Emergency stop button. Support system:Windows XP / win7 with 32bite. Sculpture, round carving, wooden handicraft processing. Advertising signs, logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry, such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter, making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet. 1.5KW water-cooled VFD. Is available operating for long time, which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood. 2, water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a USB port output. Place the control box in a ventilated dry place where there is no dust, no moisture. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. Correctly connect the machine with the controller. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Damage the driver of the controller. Correctly install the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. You can enjoy making you dream with using our CNC machine now. 4 Axis 2200W VFD. 1X main unit (Frame). 1X main unit (working base). 1X Sinal cable for A axis. 10X 47mm round head. 6X 410mm black Inner six angle screw with nut. 8X 520mm black Inner six angle screw. 4X 58mm Flat Philip’s head screw with nut and gasket. 8X 624mm BALCK FLAT Inner six angle screw. 2X six angle Wrench(3mm). 2X six angle Wrench(4mm). 1x Tools Setting Auto-Check Instrument for CNC. Outside dimension:1150x970x650mm(LxWxH). Working platform size:1045x720mm(LxW). The Communication interface of the control box is USB Port, this machine can only work with Win XP 32Bit / Win 7 32Bit / Win XP 64 Bit / Win 7 64 Bit PC system. Frame Material:The whole machine used 6061 aluminum profiles. X, Y, Z Working Area:600x900x150mm. Stepping motor:two-phase 3A (with hand wheels). Driving Power for Stepping motor:AC110,240W, Output DC24V10A. Maximum Idle speed:1500mm/m. Working Speed:50-1500mm/min (different material with different speed settings). High-speed variable frequency spindle motor, ER11 chuck, matching 6mm bur. Variable-frequency Drive(VFD):AC110V, 2200W, 0-400Hz(built-in Control box). Drive of Stepping motor 0-3.5A adjustable four-axis driveTB6560AHQchip, 24V power supply, 2,4,8,16Subdivision settings, Factory. Cooling method:Water cooling, Matching heat dissipation water pump. Carving command:G code/TAB file/nc/TAB /NCC/file. Gross weight of machine :About 145kg/320lb. Update function: with limit switch. Logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. 2.2KW water-cooled VFD. 3, High quality accurate ball Screws drive make the engraving more precision. 3 Axis 1500W VFD. Router engraving machine parameters. Drive of Stepping motor:0-3.5A adjustable three-axis drive. VFD:AC110V, 1500W, 0-400Hz (built-in control box). Communication interface:through USB PORT connect with computer. Anti-black flash, high precision, long life circle. Assembling and locating the machine on steady desk well. Connecting the control box with the machine and you computer and make sure the plug will not come off. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z). Otherwise, It will damage the driver of the controller. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Drilling, Milling, Engraving, Cutting, Carving.

CNC Router 2200W VFD Milling Engraving Machine 6090 4-Axis Cutting &Handwheel. Waterproof design, very durable, anti-dirt, oil spray. Power by USB port. Dimensions: 22 x 8 x 3cm. The usb self-check light, you can type the ” scroll” on the keyboard to activate it. Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A. Feed rate control: F+, F. Jog rate: J+, J. Spindle speed: speed up, slow down. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point. 4 Axis 1500W VFD. CNC Router engraving machine parameters. Outside dimension:1150970650mm(LWH). Working platform size:1045720mm(LW). The whole machine used 6061 aluminum profiles. Feeding height:? 140mm(From base of Z axis to platform). X, Y, Z Working Area:900(Y)600(X)140mm(Z). Y axis:SFU1605 Ball Screws. Z axis:SFU1204 Ball Screws. X axis:ø20 High intensity round rail. Y axis: SBRø20 high-strength aluminum base rails. Z axis: ø12 high-strength round rail. 57 two-phase 3A (with handwheels). Driving Power for Stepping motor. AC110, 240W, out put:DC24V10A. Maximum Idle speed:1500mm/min. Working Speed :50-1500mm / min (different material with different speed settings). Spindle motor:1500W high-speed variable frequency spindle motor, ER11 chuck, with 6mm collet. 1, The spindle motor must connect with the VFD. 2, It cannot directly connect with the supply voltage (AC110V/220V). 3, Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Drive of Stepping motor:0-3.5A adjustable four-axis drive. (TB6560AHQ chip, 24V power supply, 2,4,8,16 subdivision can be set, factory settings 8 subdivision). Repositioning precision:? 0.05mm. Spindle precision:Radial runout? 0.03mm. Carving command:G code / TAB file / nc file / NCC file. VFD:AC220V, 1500W, 0-400Hz (built-in control box). USB Control box parameters. Protection:Emergency stop button. Support system:Windows XP / win7 with 32bite. Sculpture, round carving, wooden handicraft processing. Advertising signs, logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry, such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter, making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet. 1.5KW water-cooled VFD. Is available operating for long time, which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood. 2, water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a USB port output. Place the control box in a ventilated dry place where there is no dust, no moisture. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. Correctly connect the machine with the controller. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Damage the driver of the controller. Correctly install the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. You can enjoy making you dream with using our CNC machine now. 4 Axis 2200W VFD. 1X main unit (Frame). 1X main unit (working base). 1X Sinal cable for A axis. 10X 47mm round head. 6X 410mm black Inner six angle screw with nut. 8X 520mm black Inner six angle screw. 4X 58mm Flat Philip’s head screw with nut and gasket. 8X 624mm BALCK FLAT Inner six angle screw. 2X six angle Wrench(3mm). 2X six angle Wrench(4mm). 1x Tools Setting Auto-Check Instrument for CNC. Outside dimension:1150x970x650mm(LxWxH). Working platform size:1045x720mm(LxW). The Communication interface of the control box is USB Port, this machine can only work with Win XP 32Bit / Win 7 32Bit / Win XP 64 Bit / Win 7 64 Bit PC system. Frame Material:The whole machine used 6061 aluminum profiles. X, Y, Z Working Area:600x900x150mm. Stepping motor:two-phase 3A (with hand wheels). Driving Power for Stepping motor:AC110,240W, Output DC24V10A. Maximum Idle speed:1500mm/m. Working Speed:50-1500mm/min (different material with different speed settings). High-speed variable frequency spindle motor, ER11 chuck, matching 6mm bur. Variable-frequency Drive(VFD):AC110V, 2200W, 0-400Hz(built-in Control box). Drive of Stepping motor 0-3.5A adjustable four-axis driveTB6560AHQchip, 24V power supply, 2,4,8,16Subdivision settings, Factory. Cooling method:Water cooling, Matching heat dissipation water pump. Carving command:G code/TAB file/nc/TAB /NCC/file. Gross weight of machine :About 145kg/320lb. Update function: with limit switch. Logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. 2.2KW water-cooled VFD. 3, High quality accurate ball Screws drive make the engraving more precision. 3 Axis 1500W VFD. Router engraving machine parameters. Drive of Stepping motor:0-3.5A adjustable three-axis drive. VFD:AC110V, 1500W, 0-400Hz (built-in control box). Communication interface:through USB PORT connect with computer. Anti-black flash, high precision, long life circle. Assembling and locating the machine on steady desk well. Connecting the control box with the machine and you computer and make sure the plug will not come off. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z). Otherwise, It will damage the driver of the controller. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Drilling, Milling, Engraving, Cutting, Carving.

CNC Router 2200W VFD Milling Engraving Machine 6090 4-Axis Cutting &Handwheel. Waterproof design, very durable, anti-dirt, oil spray. Power by USB port. Dimensions: 22 x 8 x 3cm. The usb self-check light, you can type the ” scroll” on the keyboard to activate it. Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A. Feed rate control: F+, F. Jog rate: J+, J. Spindle speed: speed up, slow down. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point. 4 Axis 1500W VFD. CNC Router engraving machine parameters. Outside dimension:1150970650mm(LWH). Working platform size:1045720mm(LW). The whole machine used 6061 aluminum profiles. Feeding height:? 140mm(From base of Z axis to platform). X, Y, Z Working Area:900(Y)600(X)140mm(Z). Y axis:SFU1605 Ball Screws. Z axis:SFU1204 Ball Screws. X axis:ø20 High intensity round rail. Y axis: SBRø20 high-strength aluminum base rails. Z axis: ø12 high-strength round rail. 57 two-phase 3A (with handwheels). Driving Power for Stepping motor. AC110, 240W, out put:DC24V10A. Maximum Idle speed:1500mm/min. Working Speed :50-1500mm / min (different material with different speed settings). Spindle motor:1500W high-speed variable frequency spindle motor, ER11 chuck, with 6mm collet. 1, The spindle motor must connect with the VFD. 2, It cannot directly connect with the supply voltage (AC110V/220V). 3, Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Drive of Stepping motor:0-3.5A adjustable four-axis drive. (TB6560AHQ chip, 24V power supply, 2,4,8,16 subdivision can be set, factory settings 8 subdivision). Repositioning precision:? 0.05mm. Spindle precision:Radial runout? 0.03mm. Carving command:G code / TAB file / nc file / NCC file. VFD:AC220V, 1500W, 0-400Hz (built-in control box). USB Control box parameters. Protection:Emergency stop button. Support system:Windows XP / win7 with 32bite. Sculpture, round carving, wooden handicraft processing. Advertising signs, logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry, such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter, making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet. 1.5KW water-cooled VFD. Is available operating for long time, which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood. 2, water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a USB port output. Place the control box in a ventilated dry place where there is no dust, no moisture. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. Correctly connect the machine with the controller. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Damage the driver of the controller. Correctly install the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. You can enjoy making you dream with using our CNC machine now. 4 Axis 2200W VFD. 1X main unit (Frame). 1X main unit (working base). 1X Sinal cable for A axis. 10X 47mm round head. 6X 410mm black Inner six angle screw with nut. 8X 520mm black Inner six angle screw. 4X 58mm Flat Philip’s head screw with nut and gasket. 8X 624mm BALCK FLAT Inner six angle screw. 2X six angle Wrench(3mm). 2X six angle Wrench(4mm). 1x Tools Setting Auto-Check Instrument for CNC. Outside dimension:1150x970x650mm(LxWxH). Working platform size:1045x720mm(LxW). The Communication interface of the control box is USB Port, this machine can only work with Win XP 32Bit / Win 7 32Bit / Win XP 64 Bit / Win 7 64 Bit PC system. Frame Material:The whole machine used 6061 aluminum profiles. X, Y, Z Working Area:600x900x150mm. Stepping motor:two-phase 3A (with hand wheels). Driving Power for Stepping motor:AC110,240W, Output DC24V10A. Maximum Idle speed:1500mm/m. Working Speed:50-1500mm/min (different material with different speed settings). High-speed variable frequency spindle motor, ER11 chuck, matching 6mm bur. Variable-frequency Drive(VFD):AC110V, 2200W, 0-400Hz(built-in Control box). Drive of Stepping motor 0-3.5A adjustable four-axis driveTB6560AHQchip, 24V power supply, 2,4,8,16Subdivision settings, Factory. Cooling method:Water cooling, Matching heat dissipation water pump. Carving command:G code/TAB file/nc/TAB /NCC/file. Gross weight of machine :About 145kg/320lb. Update function: with limit switch. Logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. 2.2KW water-cooled VFD. 3, High quality accurate ball Screws drive make the engraving more precision. 3 Axis 1500W VFD. Router engraving machine parameters. Drive of Stepping motor:0-3.5A adjustable three-axis drive. VFD:AC110V, 1500W, 0-400Hz (built-in control box). Communication interface:through USB PORT connect with computer. Anti-black flash, high precision, long life circle. Assembling and locating the machine on steady desk well. Connecting the control box with the machine and you computer and make sure the plug will not come off. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z). Otherwise, It will damage the driver of the controller. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Drilling, Milling, Engraving, Cutting, Carving.

1.5/2.2KW 3/4Axis CNC6090 Router Engraving 3D Carving Milling Drill Machine USB. Waterproof design, very durable, anti-dirt, oil spray. Power by USB port. Dimensions: 22 x 8 x 3cm. The usb self-check light, you can type the ” scroll” on the keyboard to activate it. Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A. Feed rate control: F+, F. Jog rate: J+, J. Spindle speed: speed up, slow down. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point. 4 Axis 1500W VFD. CNC Router engraving machine parameters. Outside dimension:1150970650mm(LWH). Working platform size:1045720mm(LW). The whole machine used 6061 aluminum profiles. Feeding height:? 140mm(From base of Z axis to platform). X, Y, Z Working Area:900(Y)600(X)140mm(Z). Y axis:SFU1605 Ball Screws. Z axis:SFU1204 Ball Screws. X axis:ø20 High intensity round rail. Y axis: SBRø20 high-strength aluminum base rails. Z axis: ø12 high-strength round rail. 57 two-phase 3A (with handwheels). Driving Power for Stepping motor. AC110, 240W, out put:DC24V10A. Maximum Idle speed:1500mm/min. Working Speed :50-1500mm / min (different material with different speed settings). Spindle motor:1500W high-speed variable frequency spindle motor, ER11 chuck, with 6mm collet. 1, The spindle motor must connect with the VFD. 2, It cannot directly connect with the supply voltage (AC110V/220V). 3, Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Drive of Stepping motor:0-3.5A adjustable four-axis drive. (TB6560AHQ chip, 24V power supply, 2,4,8,16 subdivision can be set, factory settings 8 subdivision). Repositioning precision:? 0.05mm. Spindle precision:Radial runout? 0.03mm. Carving command:G code / TAB file / nc file / NCC file. VFD:AC220V, 1500W, 0-400Hz (built-in control box). USB Control box parameters. Protection:Emergency stop button. Support system:Windows XP / win7 with 32bite. Sculpture, round carving, wooden handicraft processing. Advertising signs, logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry, such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter, making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet. 1.5KW water-cooled VFD. Is available operating for long time, which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood. 2, water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a USB port output. Place the control box in a ventilated dry place where there is no dust, no moisture. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. Correctly connect the machine with the controller. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Damage the driver of the controller. Correctly install the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. You can enjoy making you dream with using our CNC machine now. 4 Axis 2200W VFD. 1X main unit (Frame). 1X main unit (working base). 1X Sinal cable for A axis. 10X 47mm round head. 6X 410mm black Inner six angle screw with nut. 8X 520mm black Inner six angle screw. 4X 58mm Flat Philip’s head screw with nut and gasket. 8X 624mm BALCK FLAT Inner six angle screw. 2X six angle Wrench(3mm). 2X six angle Wrench(4mm). 1x Tools Setting Auto-Check Instrument for CNC. Outside dimension:1150x970x650mm(LxWxH). Working platform size:1045x720mm(LxW). The Communication interface of the control box is USB Port, this machine can only work with Win XP 32Bit / Win 7 32Bit / Win XP 64 Bit / Win 7 64 Bit PC system. Frame Material:The whole machine used 6061 aluminum profiles. X, Y, Z Working Area:600x900x150mm. Stepping motor:two-phase 3A (with hand wheels). Driving Power for Stepping motor:AC110,240W, Output DC24V10A. Maximum Idle speed:1500mm/m. Working Speed:50-1500mm/min (different material with different speed settings). High-speed variable frequency spindle motor, ER11 chuck, matching 6mm bur. Variable-frequency Drive(VFD):AC110V, 2200W, 0-400Hz(built-in Control box). Drive of Stepping motor 0-3.5A adjustable four-axis driveTB6560AHQchip, 24V power supply, 2,4,8,16Subdivision settings, Factory. Cooling method:Water cooling, Matching heat dissipation water pump. Carving command:G code/TAB file/nc/TAB /NCC/file. Gross weight of machine :About 145kg/320lb. Update function: with limit switch. Logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. 2.2KW water-cooled VFD. 3, High quality accurate ball Screws drive make the engraving more precision. 3 Axis 1500W VFD. Router engraving machine parameters. Drive of Stepping motor:0-3.5A adjustable three-axis drive. VFD:AC110V, 1500W, 0-400Hz (built-in control box). Communication interface:through USB PORT connect with computer. Anti-black flash, high precision, long life circle. Assembling and locating the machine on steady desk well. Connecting the control box with the machine and you computer and make sure the plug will not come off. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z). Otherwise, It will damage the driver of the controller. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Drilling, Milling, Engraving, Cutting, Carving.

We are not a dealer, coming from a shop where I was on shop floor taking care of my machines. I have another identical machine for sale. Machine is currently under power, inspection. Fanuc 18iMB CNC COntrol. 15,000 RPM Max Spindle Speed. BT-30 Big-Plus Spindle Taper. 40 Station Twin-Arm Automatic Tool Changer. High Pressure Thru-Spindle Coolant. 220 volts, 3 phase.

MITSUI SEIKI 4DN SUPER PRECISION 4-AXIS CNC JIG BORER WITH TOOL CHANGER, Fanuc 11M control. This machine can do milling as well. Machine was over 1M new. Questions, Please look up Swissturn5 online so we can discuss. Table travel (longitudinal) X 24. Spindle head travel (traverse) Y 16. Cross-rail vertical travel 18. From table top to spindle nose 24. Tee slot distance x No. Of slots 100 x 4. Rapid traverse speed X 5000 mm/min. Maximum permissible load on table 750 kg. Rapid traverse speed Y 5000mm/min. Vertical traveling speed 500 mm/min. Spindle speed range 40 – 500 RPM. Rapid traverse speed Z 3000 mm/min. Milling speed 1 – 2000 mm/min. Maximum drilling capacity on diameter 1-1/4mm. Maximum boring capacity on diameter 130mm. Maximum diameter of milling cutter used 100mm. Machine Dimensions: Length 2566mm, Width 1919mm, Height 2356mm. 16 Position automatic tool changer. 12 4th Axis rotary table.

Video will open in a new window. Using the mobile app? 41″X, 36″Y, 38Z MATSUURA H PLUS-630 CNC HMC W/G-TECH 30i 2007 (4345). Welcome to Retrofit to CNC Inc. Today we are pleased to offer the following item for your consideration. You are welcome and encouraged to view items in person. We describe items to the best of our ability. We try to provide good pictures for your consideration. We are not an expert on all of our items so please ask questions before purchasing. If you have questions: Eight Zero Five Five Two Five Two One Seven One. Specification are as the following. NUMBER OF AXIS: 4. PALLET SIZE: 24.8″ X 24.8″. PALLET CAPACITY: 2,640 LBS. PALLET INDEXING (B-AXIS): FULL 4TH. X-AXIS TRAVEL: 41.33. Y-AXIS TRAVEL: 36.22. Z-AXIS TRAVEL: 38.97. X-AXIS RAPID FEEDRATE: 1968 IPM. Y-AXIS RAPID FEEDRATE: 1968 IPM. Z-AXIS RAPID FEEDRATE: 1968 IPM. SPINDLE SPEEDS: 12,000 RPM. SPINDLE TAPER: CAT 50. TOOL CHANGER CAPACITY: 120. 2 PALLET SHUTTLE MACHINING WITH INDEPENDENT 6 PALLET POOL. OVERHEAD COOLANT FLUSH SYSTEM. HI-PRESSURE COOLANT THRU SPINDLE. MINOR DAMAGE FROM MAGNESIUM FIRE WE WILL REPAIR.. COVERS OFF FOR INSPECTION. THIS MACHINE IS LOCATED IN: SANTA PAULA. SPECIFICATION SHOWN ARE TO BE USED AS A. IT IS THE CUSTOMERS RESPONSIBILITY. TO CHECK FOR SIZE AND FEATURES BEFORE PURCHASING. WE WILL NOT BE RESPONSIBLE FOR ERROR OR OMISSIONS. Please verify it’s availability before purchasing! Skidding/Crating of items are extra costs. We reserve the right to relist the item without further notice. All items are subject to prior sale. We charge extra if an item needs to be put on a pallet. Turners Machinery a dba of Retrofit to CNC Inc. Santa Paula, CA 93060. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “retofittocnc” and is located in this country: US. This item can be shipped to United States.

• Model: H PLUS-630
• Spindle Horsepower: 40 hp
• Machine Type: Machining Center
• Max Spindle Speed (RPM): 12000
• Model Year: 2007
• Power Source: Electric
• X-Axis Travel Bed: 41.33
• Y-Axis Travel Bed: 36.22
• Z-Axis Travel Bed: 38.97
• Spindle Taper: CAT 50
• Brand: Matsuura
• Control: G-TECH 30i, CNC
• Voltage: 240 V