Used For: A tailstock, also known as a foot stock, is a device often used as part of an engineering lathe, wood-turning lathe, or used in conjunction with a rotary table on a milling machine. It is usually used to apply support to the longitudinal rotary axis of a workpiece being machined. Heavy Duty Construction: Built to last with tool steel, providing stability and support for your machining tasks. Adjustable Height: Easily adjust the height to accommodate different workpieces and machining requirements. Versatile Compatibility: Available in various sizes compatible with 3″ / 4″ rotary tables as well as HV4/HV5/HV6/HV8 rotary tables, ensuring compatibility with a wide range of setups. Smooth Operation: Ensures smooth and precise performance, enhancing the accuracy of your machining operations. Easy Installation: Designed for hassle-free installation, allowing you to quickly set up and start machining. Enhanced Stability: Provides a solid foundation for your workpieces, minimizing vibration and ensuring consistent results. Wide Application: Suitable for various machining tasks, from milling to drilling, turning, and more. Essential Accessory: A must-have addition to your rotary table setup, enhancing its functionality and versatility for diverse machining projects. Professional Quality: Designed for professional machinists and hobbyists alike, offering reliability and performance you can trust. Available in Different Sizes: Choose the size that best fits your rotary table setup, ensuring a perfect fit and optimal performance. For HV4/HV5/HV6 Tailstock – Minimum Center Height 80 mm & Maximum Center Height is 105. For HV8 Tailstock- Base dimension – 190 x 150mm Overall casting height – 205mm Weight – 10kg. Centre Height maximum – 215mm Centre Height minimum – 130mm Centre travel – 30mm.

Used For: A tailstock, also known as a foot stock, is a device often used as part of an engineering lathe, wood-turning lathe, or used in conjunction with a rotary table on a milling machine. It is usually used to apply support to the longitudinal rotary axis of a workpiece being machined. Heavy Duty Construction: Built to last with tool steel, providing stability and support for your machining tasks. Adjustable Height: Easily adjust the height to accommodate different workpieces and machining requirements. Versatile Compatibility: Available in various sizes compatible with 3″ / 4″ rotary tables as well as HV4/HV5/HV6/HV8 rotary tables, ensuring compatibility with a wide range of setups. Smooth Operation: Ensures smooth and precise performance, enhancing the accuracy of your machining operations. Easy Installation: Designed for hassle-free installation, allowing you to quickly set up and start machining. Enhanced Stability: Provides a solid foundation for your workpieces, minimizing vibration and ensuring consistent results. Wide Application: Suitable for various machining tasks, from milling to drilling, turning, and more. Essential Accessory: A must-have addition to your rotary table setup, enhancing its functionality and versatility for diverse machining projects. Professional Quality: Designed for professional machinists and hobbyists alike, offering reliability and performance you can trust. Available in Different Sizes: Choose the size that best fits your rotary table setup, ensuring a perfect fit and optimal performance. For HV4/HV5/HV6 Tailstock – Minimum Center Height 80 mm & Maximum Center Height is 105. For HV8 Tailstock- Base dimension – 190 x 150mm Overall casting height – 205mm Weight – 10kg. Centre Height maximum – 215mm Centre Height minimum – 130mm Centre travel – 30mm.

We have had quite a few requests to make a Spindle Square for the world market that works with Metric collets and reads in native units. We have built a new spindle square just for this that offers all of the same adjustments but fits this world market demand. The spindle square is adjustable with 8mm holes for 75 – 150mm. It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 8mm stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 175mm by 19mm by 19mm with a brushed finish. 125mm by 12mm hardened and chromed shank 18-8 stainless set screw to retain. 8mm x 6mm rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Aluminum 3.5mm (6-32) thumb screws to retain indicators (anodized aluminum as to not mar indicators). 8mm bores for Metric Indicators. Adjustments at 75mm, 100mm, 125mm and 150mm. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilizing a similar model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products.

We built these as there wasn’t square on the market that was universal to different vise sizes or allowed you to change indicators easily or use your own. Currently in the market you find 5? And 3? Off center but not a tool which can do both or even a wider range. Also the magnet used for zero’ing the square was kept separate. In this case it is held under the main spindle shaft for easy keeping. A nylon washer protects it from chipping. The spindle square is adjustable with 3/8 holes for 3-6? . It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 3/8 stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 7? By 3/4? By 3/4? With a brushed finish. 5? By 1/2? Shank hardened dowel pin with a 18-8 stainless set screw to retain. 1/4 by 1/4? Rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Brass 8-32 x 3/8 thumb screws to retain indicators. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilize this model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products.

THERE ARE MEASUREMENTS IN THE PICTURES. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

USED, SOME SORT OF ADJUSTABLE ANGLE CENTER ATTACHMENT. THE LOCK KNOB ON THE SIDE IS BENT. THERE ARE MEASUREMENTS IN THE PICTURES. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

This is a adjustable sine angle plate with Front and side attachable plates. Also an extra Sine Bar. Measurements are 8″ long X 4″ wide top plate. Bottom plate is 3-1/2 wide. Will stand up at 90° and stop. This piece is precisely ground and made to certain specs. Please check out my other items and thanks for looking.

This is a adjustable sine angle plate with Front and side attachable plates. Also an extra Sine Bar. Measurements are 8″ long X 4″ wide top plate. Bottom plate is 3-1/2 wide. Will stand up at 90° and stop. This piece is precisely ground and made to certain specs. Please check out my other items and thanks for looking.

We built these as there wasn’t square on the market that was universal to different vise sizes or allowed you to change indicators easily or use your own. Currently in the market you find 5? And 3? Off center but not a tool which can do both or even a wider range. Also the magnet used for zero’ing the square was kept separate. In this case it is held under the main spindle shaft for easy keeping. A nylon washer protects it from chipping. The spindle square is adjustable with 3/8 holes for 3-6? . It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 3/8 stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 7? By 3/4? By 3/4? With a brushed finish. 5? By 1/2? Shank hardened dowel pin with a 18-8 stainless set screw to retain. 1/4 by 1/4? Rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Brass 8-32 x 3/8 thumb screws to retain indicators. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilize this model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products.

WAY LUBE PUMP YES/YESC 220VAC 6CC W/ ADJUSTABLE TIMER.