This is a adjustable sine angle plate with Front and side attachable plates. Also an extra Sine Bar. Measurements are 8″ long X 4″ wide top plate. Bottom plate is 3-1/2 wide. Will stand up at 90° and stop. This piece is precisely ground and made to certain specs. Please check out my other items and thanks for looking.

We built these as there wasn’t square on the market that was universal to different vise sizes or allowed you to change indicators easily or use your own. Currently in the market you find 5? And 3? Off center but not a tool which can do both or even a wider range. Also the magnet used for zero’ing the square was kept separate. In this case it is held under the main spindle shaft for easy keeping. A nylon washer protects it from chipping. The spindle square is adjustable with 3/8 holes for 3-6? . It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 3/8 stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 7? By 3/4? By 3/4? With a brushed finish. 5? By 1/2? Shank hardened dowel pin with a 18-8 stainless set screw to retain. 1/4 by 1/4? Rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Brass 8-32 x 3/8 thumb screws to retain indicators. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilize this model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products.

WAY LUBE PUMP YES/YESC 220VAC 6CC W/ ADJUSTABLE TIMER.

THERE ARE SCUFFS, SCRATCHES, DIVOTS AND WEAR FROM USE. LOOK AT THE PICTURES.

30 E-Z Set Adjustable Boring Head. 0001 Accuracy – Made in Bedford, Ohio, USA. The item shown in the photographs is the actual item offered in this listing. Please review the photos to assess the condition of this item and feel free to contact me with any questions you may have. Thank you very much!

DC Spindle Motors Set Adjustable Speed Power Supply 500 W for Engraving Machines. Note: Pure copper wire is used in the motor. Model Number: 500W 100V. Package Include: 1 x Dc Spindle Motor Set.

Boring Head Tool Holder Durable Adjustable Fine Tuning Precision Machining Kit. Name: fine tuning precision boring head. Precision: 0.01 mm. Features: fine tuning 0.01mm, large machining range of boring tools (20-1200mm). Internal water hole, direct cooling of the tip, longer service life of the insert. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging.

HV6 /150 mm /6 Inches-4 Slots Rotary Table & Steel Dividing Plates Set with Free Manual-Milling Indexing Kit. Rotary table’s Overall Height : 80 mm (3-1/4) Centre Height in Vertical Position: 105 mm Worm- Gear Ratio- 1:90, which means that the 1 handle rotation shall turn the table by 4 Degrees. Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds. Quality Adjustable Tailstock for HV4/ HV6 Rotary Table. Alloy Steel Hardened & Ground Point Center. Minimum Center Height 80 mm & Maximum Center Height is 105. Set of 3 dividing plates designed to fit this HV6 Rotary Tables is included in the kit. Centre Hole of the Plate is 21 mm No. Of Holes in each Plate Plate A- 15, 16, 17, 18, 19, 20, Plate B- 21, 23, 27, 29, 31, 33 Plate C- 37, 39, 41, 47, 49 It is supplied with a brass stopper key, Bracket, Crank Handle & fixing screws. Vices & work Holding. Jewelry & Watch Making. Do It Yourself (DIY Tools). HSS Cutting & Finishing Tools. HV6 150mm 6/4 Slots Rotary Table, Adjustable Tailstock, Steel Dividing Plates Set. Pls note :- 1/. It is important to note that after the pandemic, although the logistic services have been improved a lot. However, they are still to reach their original positions. We expect our customers to understand and support us in such issues which are unforeseen and not in our control. However, we take complete onus and responsibility of supplying you a completely brand new product without any manufacturing or transit damage. Though we packed our goods with utmost care and strong packaging material, since our products are heavy in weight, there could be transit damage in a few cases. However it has been seen that such issues are not always a problem and our customers could still use them. In majority of the cases, we have experienced that we manage to resolve the issue amicably without any trouble. So a discussion is the best way of a desired resolution. Listing and template services provided by inkFrog.

USED, BRIDGEPORT TRI-SINE ADJUSTABLE ANGLE PLATE. NO CRACKS OR REPAIRS. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. ONE OF THE LOCKING BRACES IS MISSING. THE TRI-SINE WILL BE BOLTED TO A BOARD AND PACKAGED WITH CARE. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

We have had quite a few requests to make a Spindle Square for the world market that works with Metric collets and reads in native units. We have built a new spindle square just for this that offers all of the same adjustments but fits this world market demand. The spindle square is adjustable with 8mm holes for 75 – 150mm. It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 8mm stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 175mm by 19mm by 19mm with a brushed finish. 125mm by 12mm hardened and chromed shank 18-8 stainless set screw to retain. 8mm x 6mm rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Aluminum 3.5mm (6-32) thumb screws to retain indicators (anodized aluminum as to not mar indicators). 8mm bores for Metric Indicators. Adjustments at 75mm, 100mm, 125mm and 150mm. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilizing a similar model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products.