Bridgeport M Head from a milling machine. This sale is for the head only, The’swivel’ or’knuckle’ is not included. Like in the last photo with all the’black’ on it. Quill is 7 B&S Brown and Sharpe. US Motor, 220 volt, ½ HP, 3-phase. SN 519610, 1200 rpm I ran this motor off a rotary phase converter and not a static phase converter. A little damage to the casting where the oilier screws in. This does not in any way impact the operation, but I want to provide full disclosure to all known flaws. Comes with the following items. Collet set (All of them are 7 B&S taper). 3/8 Cant read anything on it but looks like Bridgeport brand. I have no idea why a 21/64. 7/16 Unknown modern brand (probably Chinese). A ½ shank is tight, and a 31/64″ drill is a little loose – I think it is 1/2″ Bridgeport brand… But I cannot be certain. Jacobs brand drill chuck arbor 7 B&S to 3JT (Jacobs Taper). Jacobs brand drill chuck arbor 7 B&S to 6 JT (Jacobs Taper). Three (3) National Twist Drill and Tool Company Left Hand cut (LH) 6 flute 7/8 HSS endmills (non center cutting) Length of flute is about 1.470. One (1) National Twist Drill and Tool Company Left Hand cut (LH) 6 flute 7/8 HSS endmills (non center cutting) Length of flute is about 1.130. This one has had the end portion of the flutes cut or ground of f. Local pick-up is free. My height weight and dimensions are an estimate. I will crate, I will bring it to the depot and get it going on my end. I will crate and bring to the depot for free. Here’s a video of the head running. The item “Bridgeport Milling Machine M Head with Collets, Arbors, End Mills 1/2hp 3ph 220v” is in sale since Tuesday, January 1, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “yaker” and is located in Rocky Mount, Virginia. This item can be shipped to United States.

• Brand: Bridgeport
• Model: M Head
• Country/Region of Manufacture: United States

Recent searches

• bridgeport m head

Rockwell vertical milling machine. Very heavy duty, not at all like the new imports. All original, original paint. Tight spindle and ways. Small footprint, big capabilities. Perfect for 2-car garage or basement shop. 110v plug in anywhere. Not from production shop. Was from estate of hobbyist Harley builder. Also have matching Clausing tool-room lathe for sale. Comes with Mill vise (needs new jaws). Complete set brand new R8 collet set by 16ths. Jacobs 14N Ball Bearing 1/2 drill chuck on R8 arbor. Free loading onto your truck or trailer. The item “Rockwell 21-100 Vertical Milling Machine, mill vise, Collets, jacobs chuck” is in sale since Saturday, December 22, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “cmcdivit” and is located in Fountain Valley, California. This item can’t be shipped, the buyer must pick up the item.

• Brand: Rockwell Manufacturing Company, Pittsburgh, PA
• Custom Bundle: Yes

This unit has an X-axis power feed and includes a variety of collets, bits, set up blocks, and related accessories. It also includes a machinist vice and a variable frequency drive that allows the three phase motor to be operated on 120 V AC. There are no problems with this machine and it is ready to work for you. The machine is located in urbana, IL 61801. The item “Rockwell 21-100 Vertical Milling Machine with X-Axis Power Feed, Collets & Bits” is in sale since Friday, November 30, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “vilas_2016″ and is located in Urbana, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Brand: Rockwell Manufacturing Company, Pittsburgh, PA
• Custom Bundle: Yes

SN M1061, 220v / 3phase only, ½ hp US Motor with reversing switch and 9′ power cord. Includes (5) Morse Taper #2 collets in the following sizes: 1/8″, 5/32″, 3/16″, 1/4″ and 1/2. Includes the mounting bracket for a round ram machine. The head has been stripped of paint. This head appears to be in Good Condition with normal wear for the age. There is NO BELT, no hand-wheel or location pin for the mounting arm. What you see in the photos is all that is included. Please contact me with any questions. The item “Bridgeport M HEAD with 1/2 HP 3 PHASE 220 motor & (5) collets” is in sale since Saturday, May 19, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “pdb1956″ and is located in Julian, North Carolina. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Model: m head
• Country/Region of Manufacture: United States
• Bundle Listing: No

MILLING TOOLING KIT-VISE, BORING HEAD SET, CLAMPING KIT, R8 COLLETS BRIDGEPORT. Our part # TTC-81-300-106. 2 ROUND BORING HEAD. 7/8-20 threaded back. R8 SHANK FOR BORING HEAD. CARBIDE TIPPED BORING BAR SET. Shank: 1/2 (C6 grade). Supplied with wooden stand. SWIVEL BASE MACHINE VISE. Fits Bridgeport type machines. (4) Studs of each length: 3″, 4″, 5″, 6″, 7″, 8″. Sizes: 1/8″ thru 3/4″ by 16ths and 7/8. (1) R8 collet rack. We also sell custom tooling packages! We also sell custom tooling packages! The item “MILLING TOOLING KIT-VISE, BORING HEAD SET, CLAMPING KIT, R8 COLLETS BRIDGEPORT” is in sale since Thursday, September 15, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “allindustrialtoolsupply” and is located in Huntington Beach, California. This item can be shipped to United States.

• Brand: All Industrial
• MPN: 81-300-106

We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On. Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However, Should This Not Be Possible Or. Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives!! This Has Been , Inspected And Tested For It’s Function Only… We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It’s Installation , Operation & Safe Guarding. Any And/Or All Issues Or Concerns. With Regards Safety Are The Buyers Sole Responsibility. And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above. Machine Details & Specifications. (1) Pre-Owned /Used Clausing 8520 Vert. Mill W /6″x24″ Table, 4Riser, Assorted Collets, Drill Chuck Off/Set Tool Holder & Brown & Sharpe Dividing Head & More! Details & Spec’s. Electrical – 115/230 Volts , 1Ph. Table Size – 6″ x24″ W/3 T Slots. Traverse “Cross”- 5. Vertical Spindle Type – Morse #2. Vertical Spindle Speeds. 180, 350, 600, 1000, 1900 and 3250 rpm. Quill Feed Travel – 3. Vertical Head Rotation – 90 Deg. Right & 90 Deg. Machine Weight – 580 Lbs. Machine Dimensions – 36″x40″ x 70. Brown & Sharpe Dividing Head & Tail Stock. Off Sett Tool Holder. This Is A Nice Running Clausing Mill That’s In Very Good Overall Condition!! Safety Requirements & Standards. Additional & Optional After Sale Services. Typical Minimum Trucker Requirements Needed To Obtain The Best Rates. Other Options Would Be Open Top Flat Bed Truck , Strapped & Covered. Or if you wish. Pick It Up Yourself, No Charge For Loading. Brenda & Cliff Davis. (at) davismachinery(dot) com. The item “Clausing Vert. Mill With6x24 Tble, 4Riser, Collets, Chk OS Hldr& Dvidng Head, 115V” is in sale since Saturday, April 14, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Other Mfg & Metalworking”. The seller is “davismachinery” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Brand: Clausing
• Model: 8520
• MPN: 8520
• Country//Region of Manufacture: United States
• Country/Region of Manufacture: United States
• Equipment Type: Milling Machine
• Compatible Equipment Make: Clausing

Here is a used Volstro rotary machining head for Bridgeport and similar mills. As you can see in the photos, it is in very good used condition. As my buddy says: “It’s got some paint”. The unit uses an R-8 arbor and mounts to the quill of your milling machine. 3.375 standard bridgeport quill mount. It uses E16 collets (NOT ER-16 collets). It has all 7 collets. 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″ and 1/2 included. The E16 collets are extraordinarily difficult to find, so its quite rare to find one of these heads with the entire collet set intact. The box is in good shape with standard machine shop patina inside and out. I found, downloaded and printed the parts list and instruction manual, as well as a copy of the original brochure for the head. It will be included. The head will be well packed in a foam lined box to protect it. T E R MS. Please use the ASK A QUESTION link at the bottom of the page to contact me. Description and photos will be accurate. Please check my feedback. If you need extra time, it’s better to give me a heads up in advance. I’m generally agreeable to most requests. Despite best efforts, occasionally an unforseen issue arises. If there is any issue, please allow me the opportunity to work with you to provide a satisfactory resolution prior to leaving feedback of any type. A little communication goes a long way.. Please check out our other auctions. The item “Volstro Rotary Milling Head for Bridgeport Mill withALL COLLETS” is in sale since Thursday, October 19, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “rtcg” and is located in Rio Rancho, New Mexico. This item can be shipped to United States.

BRIDGEPORT Series 1 2 HP Variable Speed Vertical Mill, S/N 12BR-204553, New 1979. Table Size – 9″ x 42″ Longitudinal Travel – 30″ Saddle Cross Travel – 12″ Knee Vertical Travel – 16″ Quill Travel – 5″ Ram Travel in and out – 12″ Min / Max Throat Distance – 6-3/4″ to 18-3/4 Max Weight of Workpiece – 750 Lbs. Variable Speed Range – 60 to 4200 RPM Quill Feeds (3) – 0.0015″, 0.003″, 0.006″ per rev Spindle Taper – R8 Max Collet Capacity – 3/4″ Spindle Motor – 2 HP Electrics – 3/60/460v Floor Space – 65″ LR x 72″ FB x 82 H Weight, Approx – 2150 Lbs. Equipped with: Acu-Rite 2-Axis Digital Readout Kurt Vise with Swivel Base Misc R8 Collets Work Lights 1-Shot Lubrication Offered as is, as removed from service. Machine is functional, dro works, a bit of backlash in x. Offered locall y an d subject to prior sale. Loading is availab le. Cre dit card users need to cal l us with the card information. Sale subject to Advanced Machinery Companies Terms & Conditions. The item “Bridgeport Series 1 2 HP Vertical Mill Milling Machine with DRO, Vise, Collets” is in sale since Tuesday, July 25, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “amcsales” and is located in Dayton, Ohio. This item can be shipped to United States.

• Brand: Bridgeport
• MPN: Does Not Apply
• Model: Series 1 2 HP
• Country/Region of Manufacture: United States