Item# 15491A HAAS MODEL VF-4 VERTICAL MACHINING CENTER WITH PALLET CHANGER & HAAS CONTROL, 50 X 20 X 25. HAAS CNC CONTROL WITH FLOPPY DRIVE. 1 MB EXPANDED MEMORY. SPINDLE NOSE TO TABLE: 4 29. MAXIMUM WEIGHT ON TABLE: 3,500 LBS. CENTER DISTANCE: 3.15. TAPER SIZE: #40 TAPER. SPEED: 0 7,500 RPM. DOOR OPEN WIDTH: 48.50. MACHINE WEIGHT: 13,300 LBS. AIR REQUIRED: 4 SCFM, 100 PSI. MACHINE DIMENSIONS: 144 LR X 95 FB X 107 H. PALLET CHANGER DIMENSIONS: 53 LR X 65 FB X 42 H. ELECTRICS: 230 VOLTS, 3 PH, 60 CYC. All specifications subject to verification. Rigging and hauling not included. Brewster Machinery Sales Inc. Kevin Brewster President / AEA. Former MDNA Chapter Leadership Chairman, New England Board Representative. AMEA Accredited Equipment Appraiser. Will answer all of your questions and put everything in writing before the deal is closed. The item “HAAS VF-4 VERTICAL MACHINING CENTER WITH PALLET CHANGER & HAAS CONTROL” is in sale since Friday, September 28, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “brewstermachinery” and is located in Bethel, Connecticut. This item can be shipped to United States.

• Model: VF-4
• MPN: Does Not Apply
• Brand: Haas
• UPC: Does not apply

See Video of Machine Running a Program. This machine just came from service last month where it was turning out close tolerance parts on a daily basis for the Aeronautics Industry. It has a Rebuilt Spindle Drive. It is a Beautiful, Well Cared for Machine that is ready to go to work. Fadal Model 3016 (904-1) CNC Vertical Machining Center (VMC). Axis Travel: 20 inch. Overall Length: 116 inch. ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER. This Machine has 63,747 Power On hrs. And only 7,841 Running hrs. We will load, free of charge. First of all, our descriptions are as accurate as we can possibly make them, and we’ve been describing equipment for longer than we care to admit. Every item we sell, unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse 515 Kercher St. Best Ways Brokerage Inc. This Machine will weigh approx. 8,500# and occupy 10′ of bed space. The item “1994 Fadal 3016 VMC with Fadal CNC 88HS CNC Control and RS232 Port” is in sale since Wednesday, January 16, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “u$ave2″ and is located in Miamisburg, Ohio. This item can be shipped to United States.

• Highest Spindle Speed (RPM): 5001 – 7500
• Model: 3016 (904-1)
• Country/Region of Manufacture: United States
• Spindle Horsepower: 15
• Table Length: 35” – 39.9”
• Model Year: 1994
• Make: Fadal
• Serial Number: 9400870
• Power Source: Electric
• Type: CNC, Vertical
• Control Type: Fadal CNC 88HS
• X-Axis Travel Bed: 26” – 30”
• Y-Axis Travel Bed: 16” – 20”
• Z-Axis Travel Bed: 16” – 20”
• Spindle Taper: CAT 40
• Function: Drilling
• Brand: Fadal
• Table Width: 15” – 19.9”
• Control: CNC
• Voltage: 230 V

Have a machine or an entire facility to sell? Turn your surplus into CASH! Matsuura MC-760VX Vertical Milling Machine. Spindle Center to Column. Rapid Traverse Rate (X/Y/Z). Max Cutting Feed Rate. 10-HP Motor 220V / 3-Phase / 60Hz. 45.28″ x 16.14″. 25 – 4,500 RPM. 590 / 590 / 472 IPM. 1.9 Seconds Tool to Tool. 102″ x 118″ x 105 High. Fanuc Series O-M Control. Fanuc Red Cap Motors. Coolant Pump and Tank. Matsuura MC-760VX CNC Vertical Machining Center – YouTube. If any other information is needed to help you with quoting, please send us a message. Cash, wire transfers, or company checks are welcome and encouraged. This guarantee applies only to machines, which we own. Shall not be responsible for any damages done by truckers, riggers, or other parties. All machine prices include loading unless otherwise stated. Machinery descriptions are intended as a guide only and their accuracy is not guaranteed. There are no warranties which extend beyond the description of the face hereof. Quotations subject to change without notice. It is the buyers and users responsibility to provide proper safety devices, training and equipment to safeguard the operator from harm for any particular use, operation or set up, and to adequately safeguard the machine, or machines, to conform to all Federal, State and Local Government Safety Standards and All Industry Safety Standards. The item “Matsuura MC-760VX CNC Vertical Machining Center Fanuc Control, ID# M-021″ is in sale since Thursday, August 2, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “energ_machinery” and is located in East Hampton, Connecticut. This item can be shipped to United States.

• Spindle Horsepower: 10
• Table Length: 40” – 59.9”
• Model Year: 1991
• Type: CNC, Vertical
• Control Type: Fanuc
• X-Axis Travel Bed: 26” – 30”
• Y-Axis Travel Bed: 16” – 20”
• Z-Axis Travel Bed: 16” – 20”
• Highest Spindle Speed (RPM): 4001 – 4500
• Make: Matsuura
• Table Width: 15” – 19.9”

Proto Trak TRM CNC bed milling machine with a 40 taper spindle and MX2 control- a 2 axis machine. PLEASE CHECK MY OTHER ITEMS. I leave the worn out and repainted machinery for the other guys. The item “Proto Trak TRM CNC Bed Mill with MX2 Control 40 Taper with Toolholders” is in sale since Saturday, February 10, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mark10312″ and is located in Farmingdale, New Jersey. This item can be shipped to United States.

• Model: DPM TRM
• Country/Region of Manufacture: United States
• Type: CNC, Vertical
• Control Type: CNC
• Make: Proto Trak

Complete 4-axis CNC Mill. 4 Servomotors with High-resolution Encoders. Eding CNC control board. Dell Laptop (control) computer. ArtCAM Express CAD/CAM design software. Sherline CNC Rotary Table. Sherline Adjustable Rotary Table Mount. Mini Vise and other assorted tools and hold-downs. Videos of this mill in use are on YouTube. We will be glad to demonstrate. Height 21-3/8 in (manual) 26-3/8 in (CNC). Width 17 in (manual) 22 in (CNC). Depth 16-3/4 in (manual) 21 in (CNC). Weight 80 lbs (manual) 105 lbs (CNC). Maximum bearing runout 0.0002 in. X axis dovetails 45 deg. Y axis dovetails 90 deg. Z axis steel box ways. 1/2-20 leadscrews on X, Y, & Z. All lead screw drives have friction adjustable micrometer dials in. Bore multi-step vee belt. Construction – Steel, hard anodized aluminum on all moving components, adjustable brass gibs, and precision ground steel ways hand lapped for long life and accuracy. Travel in X axis 9.5 in. Travel in X axis 12 in. Travel in X axis 11.375 in. Travel in Y axis 5.5 in. Travel in Z axis 6.0 in. Table dimensions 3 1/2 x 15 1/2 inches (Model 2018). Table dimensions 3 1/2 x 18.4 inches (Model 2019). Table dimensions 3 1/2 x 18.4 inches (Model 5019). Maximum Z-distance to table 9.0 in. Z-Axis swivel 90 degrees. Z axis column rotation up to 180 degrees. Spindle head rotation 90 degrees. Spindle Runout less than. Maximum spindle speed 10000 RPM. Sealed precision ball bearing. Bearing OD 1.5748 in. ID 0.6692 in. Spindle nose 22mm X 1.5mm. Spindle hole 0.406 in. Spindle ID taper 8 deg (16 deg included). Collet diameter 3/8 in. Pulley size 5/8 in. Ball Bearings in all leadscrew bearing blocks. The item “Taig 4-axis CNC Mill complete with control, computer, and ArtCAM design software” is in sale since Friday, February 22, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “artisticcnc” and is located in Mentor, Ohio. This item can be shipped to United States.

• Model: Mill
• Modified Item: Yes
• Country/Region of Manufacture: United States
• Spindle Horsepower: Less than 1
• Table Length: 10” – 14.9”
• Model Year: 2015
• Country of Manufacture: United States
• Country//Region of Manufacture: United States
• Make: Taig
• Type: CNC, Vertical
• Control Type: EdingCNC
• Highest Spindle Speed (RPM): 7501 – 10000
• X-Axis Travel Bed: 10” – 15”
• Y-Axis Travel Bed: Less than 10”
• Z-Axis Travel Bed: Less than 10”
• Modification Description: Complete CNC system ready to go.
• Brand: Taig
• Table Width: Less than 10”

Welcome to Select Machine Tool. Trak DPM5 Rigid Bed CNC Milling Machine With Proto Trak SM-3 CNC Control. S/N 022AS11647, 2002 Year Made. THE MILL HEAD HAS BEEN COMPLETELY REBUILT NEW SPINDLE CARTRIDGE, BEARINGS, BELTS, PULLEYS, DRIVE DOGS AND POWER FEED GEARBOX. BRAND NEW AUTO LUBE PUMP INSTALLED AND Z AXIS WAY COVERS. STANDARD EQUIPMENT & FEATURES. CNC Controlled Ram Motion. Use As SM-2 Or SM-3. Solid Ram Construction For Rigidity. Ram Is Counterbalanced For Easy Positioning. Large Quill Diameter 3.930. Precision Ground Ball Screws. Ways Are Hardened & Ground With Turcite. Servo Motors With High Resolution Encoders. Graphics Let You See Your Part Before Machining. Program Part Geometry, Tool Path Is Generated Automatically. Heavy Table Loads 1,320 lbs. SPECIFICATIONS OF MILLING MACHINE. SPECIFICATIONS OF MILLING MACHINE: CONT. Spindle Taper 40 NST. Head Swivel (R&L) 90. FEATURES OF SM-3 CONTROL HARDWARE. Pentium Processor With Built-In Video and Ethernet Cards. 32 MB of Ram With Expansion Slots Available. Teac Floppy Disk Drive. Ports and Connectors: P/S 2 Keyboard and Mouse, RS232, RJ45. 10.4 Color Active-Matrix Display. Override of Programmed Feedrate and Rapid With Graphical Indicator. Polycarbonate Sealed Membrane with LED Status Lights. Servo Motors 280 in-oz Torque. FEATURES OF SM-3 SOFTWARE. Auto Geometry Engine Makes Calculations For You While You Program. Automatic Diameter Cutter Compensation. Two Axis Circular Interpolation. Look Program Graphics With A Single Button Push. Six Modes of Operation. Color Graphics With Adjustable Views. Tool Length Offset With Modifiers. Jog and Powerfeed in DRO Mode. Automatic Return to ABS Zero. Incremental and Absolute Position Readout. Inch / MM Selectable. FEATURES OF SM-3 SOFTWARE CONT. Teach In Of Manual Moves. Scaling Of Print Data. Selectable Tool Path or Part Geometry Programming. Convenient Canned Cycles For All Geometry. Circular, Rectangle or Irregular Pockets. Helix and Thread Milling Routines. Subroutine and Copy of Programmed Events Displayed. Mirror With Selectable Cutting Order. List Step Graphics with Programmed Events. Conrad One Input For Automatic Corner Radius. Incremental and Absolute Programming. Math Helps With Prompted, Graphical Interface. Tool Stepover Adjustable For Pocket Routines. Selectable Ramp Or Plunge Cutter Entry. Clipboard to Copy Events Between Programs. Real Time Run Graphics With Tool Icon. Access to Networked Devices. Automatic File Back Up Routine. LOCATION KMWH STOCK# 05348. We want you to be happy and we also want to help you in any way possible. So that we may earn your business. We want to build relationships with our customers and the best way to do that is by providing quality products, honest representations, value, and service. Again, we want to thank you for your time and interest and we look forward to earning your business in the near future. In order for this to be an enjoyable experience, please ask all questions before purchasing. And we will try to reply within 24 hours. Thank You for stopping by and please view our other items. FOR ALL OF YOUR AIR, TOOLING, AND MACHINING NEEDS PLEASE VISIT. The item “SWI Trak DPM5 Rigid Bed CNC Milling Machine With Proto Trak SM-3 Axis Control” is in sale since Friday, November 16, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “selectmachine” and is located in Roanoke, Virginia. This item can’t be shipped, the buyer must pick up the item.

• Brand: SOUTHWESTERN INDUSTRIES
• Model: DMP5
• Custom Bundle: No
• Modified Item: No
• MPN: Does Not Apply
• Non-Domestic Product: No

TAS IRON LTD OFFERS AN OUTSTANDING VERTICAL MILL CONTROL, THIS CONTROL HAS FEATURES LIKE RPM READOUT, FORWARD AND REVERSE, ELECTRONIC BRAKING, 4 PRESET SPEEDS THAT IS REMEMBERED FOR DIFFERENT TOOL SETUPS, MAIN SPEED CONTROL FROM ZERO TO TOP SPEED WITHOUT STOPPING. BRIDGEPORT 2J HEADS ARE GUTTED AND ALL THOS WEARABLE PARTS ARE REMOVED CREATING A VERY RELIABLE AND QUIET RUNNING HEAD. FOR HEAVIER PRODUCTIONS WE CAN INCREASE THE HORSE POWER IF REQUESTED. CURRENT STANDARD MODEL IS UP TO 3 HP. THIS CONTROL CAN RUN ON SINGLE PHASE OR THREE POWER. OFFERS A TAPPING MODE WITHOUT AUTOMATIC REVERSIBLE SPINDLE. THIS CONTROL IS AVAILABLE IN THE LATHE DESIGN AS WELL. YOUR LATHE CAN BE SET TO MAKE TURNING ROUTINES WITH CONTINUING AN AUTOMATIC REVERSAL MOVE TO TAKE ANOTHER CUT OR TOP SET UP THREADING. HORSE POWER FOR THE LATHE STYLE CAN ONLY GO TO 7.5 HP FOR ADDITIONAL COST AT SINGLE PHASE. BUT ON THREE PHASE WE DON’T HAVE RESTRICTIONS AND COST WITH BE DETERMINED BY HORSE POWER REQUESTED. The item “VERTICAL MILLING MACHINE CONTROL SYSTEM, FOR BRIDGEPORT, ACRA, ACER, SHARP” is in sale since Sunday, July 22, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “tasironltd2012″ and is located in Berea, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Model: ELSR CONTROL
• Country/Region of Manufacture: United States
• Brand: TAS IRON LTD

USED REVOLUTION MINUTEMAN III CNC BED MIL with the Centroid CNC Control. Table Size: 12 x 54. X Axis Travel 39. Y Axis Travel 18. Z Axis Travel 20. Spindle Speeds Infinite: 60-4200 RPM. Quill Travel: 5.80. 40 Taper with Power Drawbar. 5 HP Spindle Drive Motor. Fully Programmable Spindle Speeds. Advanced Machinery Resources Inc. Specifications subject to purchaser verification. Orders are not processed until theyre paid in full. The item “Revolution 3 Axis CNC Bed Mill with Centroid Control Bedmill Milling Machine” is in sale since Friday, December 8, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “jerry7oai” and is located in Vancouver, Washington. This item can be shipped to United States.

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices – Fast & Easy. Manual Lathes, Mills, Drills, Saws. Planers & Planer Mills. Ovens, Furnaces & Environmental. 14″ Swg 21.26″ cc Bridgeport-Romi POWER PATH 15 CNC LATHE, DX-32 Control, 8Chk. 14″ Swing 21.26″ Centers Bridgeport-Romi POWER PATH 15 CNC LATHE, DX-32 Control, 8Chk. Ref # : 158313 iammdna XCNCTC. BRIDGEPORT POWERPATH 15 CNC TURNING CENTER. GENERAL SPECIFICATIONS AS PER BROCHURE. SWING OVER “Z” COVER: 17.32. CUTTING DIAMETER: 11.02. CUTTING LENGTH: 21.26. SPINDLE HOLE DIAMETER: 2.6. SPINDLE SPEEDS (ON PROGRAM CHANGE). RANGE 1: 15 – 1,500 RPM. RANGE 2: 45 – 4,500 RPM. # OF TOOLS: 12. NEXT TOOL: 0.8 SEC. 180 DEGREES: 1.5 SEC. BODY TRAVEL: 12.4. QUILL TRAVEL: 5.12. QUILL DIAMETER: 3.15. QUILL TAPER HOLE: 4MT. : 104.6″ X 59.3″ X 66.5. BRIDGEPORT DX-32 CNC CONTROL. 8 3-JAW HYDRAULIC CHUCK. ALL AVAILABLE TOOLHOLDERS & MANUALS. The item “14 Swg 21.26 cc Bridgeport-Romi POWER PATH 15 CNC LATHE, DX-32 Control, 8Chk” is in sale since Sunday, March 31, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “imachine” and is located in Harrison, New Jersey. This item can be shipped to United States.

• Brand: Bridgeport-Romi
• Model: POWER PATH 15
• MPN: POWER PATH 15

D&M4 CNC Machining Center based on the Sherline Mill in an nice enclosure. I refitted it with a Centroid Acorn motion controller. It has the DIGITIZING software level of the Centroid CNC12 software. It comes complete as shown. It has a Lenovo Tiny PC with WiFi, Asus 15 Touchscreen monitor, Contour Shuttle PRO for an MPG, I fitted a Rino right angle drive to it for a 4th axis and a small chuck. Still has its 1/4-20 leadscrews. I also fitted a KB Electronics KBIC controller with SI-5 signal isolator. The Centroid Control can control the spindle RPM. Fitted with micro switches so the machine can home. Has a Gecko G540 4 axis stepper driver running on a 48VDC power supply. Comes with some tooling, & a Shars vise. Full control support on Centroid User Forum. I could see a jeweler using this to engrave wax patterns and engrave rings etc. It “might” be able to go UPS ground. I may also be willing to meet someone within 100 miles of the Phoenix, AZ area. The item “D&M4 Sherline CNC Mill with Centroid Acorn CNC Control & 4th axis” is in sale since Monday, January 21, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “marty_in_mesa” and is located in Mesa, Arizona. This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: United States
• MPN: Does Not Apply
• Brand: Sherline