The Mini XY Cross Feed Mill T Slot Table is a manual milling machine accessory designed for precise milling tasks. This compact and versatile device is compatible with milling machines and allows for easy control and operation. The XY table provides a convenient way to feed material through the milling machine’s T slot, ensuring accurate and consistent results. Ideal for small-scale milling projects, this Mini XY Cross Feed Mill T Slot Table is a valuable addition to any workshop or manufacturing facility. Needs a handle on lower axis.

90°BT40/50 Angle Head Side Milling Head Cross Milling Head Right Angle Head1-7mm. Note: The package contains a universal positioning block. After receiving the goods, you need to drill holes by yourself according to the size of your main shaft for installation. To match other drive shank models, pl. Ease contact Customer Service. Precautions for using angle milling head. Check whether the weight of the angle milling head meets the weight requirement of the machine tool magazine. (If not, it is recommended to install the angle milling head manually). Check whether the fastening bolts are loose before the angular milling head is installed and processed. Check whether the positioning pin of the angle milling head is fastened with the groove of the fixing block. Check whether the limit pin is completely detached from the positioning ring before use. Do not use the angle milling head continuously for a long time. It is recommended to stop the machine for 5 minutes after 2 hours of machining to prevent overheating of internal parts such as bearings and gears inside the angle milling head. Use a grease gun to inject a small amount of grease every week to lubricate the gears. Do not use the angle milling head when you need to do a good anti-corrosion treatment. Strictly prohibit the use of angle milling head more than the maximum speed range of speed, general use of the maximum speed of 70% of the maximum speed, can be used for a short period of time the highest speed. It is strictly prohibited to strike the angle milling head shell vigorously to prevent the internal bearing gears and other parts from being broken. Keep the input shank and output taper clean when using the angle milling head. Before installing a cushion at the bottom to prevent the angle milling head from dropping the americium mushrooms name countenance legs sticky calabash amber tailored like a person. Packing contents: 1 piece. Otherwise, we will not be able to send the package. Examples of such countries include South Africa, Chile, Peru, Mexico, South Korea, etc. We will solve the problem for you. Please do not leave negative or neutral feedback without contacting us first.

Mini High-Precision Multi-Function Workbench Bench Drill Milling Machine Cross Sliding Table Dovetail Carriage Micro Vise 20X8CM. Product name: High-Precision Multi-Function Workbench. X axis travel: 73MM. Bottom hole distance: 13CM.

Type 150 Power Feed. Type 150 – Y Axis Cross Feed. Semi-automated machining on Class 1 mills to 3 hp. Peak Torque (full-wave SCR control compound DC motor): to 150 in. / 17 NM torque. Intermittent Torque: 120 in. / 13.6 NM. Continuous Torque: 100 in. / 11.3 NM. 50-35 IPM / 13-889 mm/min. Rapid Traverse: 35 IPM / 889 mm/min. Gear Reduction Ratio (motor to screw shaft): 72:1. Smooth surface finish at speeds as low as 0.5 ipm or 13 mm/min. Superior speed regulation, ramping, dynamic breaking, friction safety clutch and limiting circuit protection. Helical gearing and torque limiting friction saftey clutch with new and improved gear. Electrical: 110V, 50/60 Hz, 3 Amps. / 6.8 kg.

Advance cross-slide rotary table. Located in Port Huron Michigan. Pallett weighs around 350 lb.

X Y Axis Mini Bench Cross Slide ViseTable Milling Drilling Fixture Worktable Table size: 310 90mm Dimensions: 310 98 78mm X axis travel: 184mm Y axis travel: 52mm Model :AB8301 Product weight: 2.12Kg Features: The table applies to mini bench drill and drill bracket series. It can also be applied to other suitable machine. The bench is made up of several adjustable dovetail aluminum alloy, We can guarantee a minimum of space and to ensure accuracy. Package :1 AB8301 Cross table. Please visit our store for other choice. International Buyers – Please Note.

CROSS FEED NUT FOR A HARDINGE HORIZONTAL MILLING MACHINE.

Made in USA 6-3/4 Square Compound Dovetailed Cross Slide Table 43 Pounds. This is an American made cross slide, it came off of a machine we parted out where it had held a grinding spindle. The dovetails are tight (no play). The screws are not preloaded and the handle turns a little before the slide moves when reversing direction. The base is 6-3/4 square. The top has a 4 diameter milled surface with a 3/4-10 threaded hole. The height is 5. The weight is 43 pounds. It is a residential address. It is an agricultural address. Your business property also has a residence. You are a business surrounded by residential or agricultural area. You are a stand-alone business or one of only a few businesses miles from other commercial hubs. Our carriers will consider your address limited access if it is a: Cemetery, Church, Country Club, Farm, Golf Club, Hotel, Mall/Shopping Center, Mine, Park, Prison/Correctional Facility, School/College/University, Storage Facility or a utility site. Our carriers will also consider your address limited access if. A semi truck can not easily pull into and turn around. A semi truck must park on the road. A semi truck has to back in off the road. Please call ahead so we have time to pull your items from our Inventory. Thank you for your time and we look forward to serving you.

Bridgeport Cross Feed Screw Assembly with Brass Nuts, New, Unused Surplus; Two available at time of listing. Price is for each.

MYSWEETY Multifunction Worktable Milling Working Cross Table Milling Machine Compound Drilling Slide Table For Bench Drill Adjustme X-Y (6350 SIZE). Mini multifunctional working table 6350, The table is suitable for mini drill and drill bracket series. It can also be applied to other suitable machines. The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy. Adjustment in X direction: 180 mm. Adjustment in Y direction: 50 mm, Distance between grooves : 34mm. Hand wheel with adjustable scale: A ring = 3 mm. Ideal for all drill stands, drilling and milling machines. Specification: Name: Bench Drill Work Table Vise Model: 800913 Specifications: 6350 Adjustment For X Direvction: 180mm Adjustment For Y Direvction: 50mm Material: Carbide Steel Color: Mainly Silver Size: 350100122mm Features: -Made with best quality components -Precise scale for better working -This support table is completely pre-assembled -Strong and sturdy -Stable performance Application: Ideal for all drill stands, drilling and milling machines. Package included: 1 X Milling Support Table Worktable Supplied with screws. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store.