This mini drilling/milling machine with lathe bed can handle most materials. It has a 550watt motor with variable speed drive, The working table with t-slots can enable clamping of workpieces and metric graduated compound scales. The machine also incorporates a tilting column which allows drilling/milling of workpiece at ±90° from vertical. It is supplied with 13mm chuck accessory kit. For adjusting and setting. The lathe bed is made of high grade iron. The rigidity of lathe, the handness and accuracy of the v-slideways are obtained by raw materials, heat hardening and grinding. This machine is DC motor driven. The spindle speed is variable from 20-2500rpm. The feed speed can be adjusted according to the requirements of different workpieces. Head swivels ±90° verticaly. Adjustable gibs on table precision. Adjustable stops on table. Straightforward gear drive mechanism. Extra wide cross table. Chuck Arbor Bolt provides tightening of drilling chuck through the spindle. Rack and pinion feed for drilling operations. Safety guard with microswitch according to EU-requirements. Available in metric leadscrews. START / STOP switch incorporates emergency STOP. Table travel:10/12250/300mm. Cross slide:4″/5″ 100/130mm. Spindle travel:7 180mm. Taper of hole in spindle :MT #3 or R8. Drilling Capacity:1/2 (13mm). End Milling Capacity:5/8 (16mm). Face Milling Capacity:11/8 (30mm). Longitudinal travel: 3.94/10cm. Cross travel: 9.84/25cm. Spindle stroke: 7.87/20cm. Working table size: 18.11″x4.41″/46x11cm. Max distance spindle to table: 8.66/22cm. T-slot: 0.39/1cm. Spindle rotary angle: -45°+45°. Dimension: 14.5″x 26.5″x27/37x67x68cm. Replcement of chuck: When replacing the chuck, place a cloth or a piece of wood on the bed way at the bottom of the chuck. This is to avoid damage to the bed way caused by carelessly dropping the chuck. Loosen the 3 set screws to replace the chuck. Replcement of jaws: There are two types of jaws: Internal and external. Please note that the number of jaws fit with the number inside the chuck’s groove. Do not mix them together. When you are going to mount them, please mount them in ascending order 1-2-3, when you are going to take them oit, be sure to take them out in descending order(3-2-1) one by one. After you finish this procedure, rotate the jaws to the smallest diameter and check that the three jaws are well fitted. If you need to reassemble them again as they are not properly assembled. When you are going yo mount the work piece you need only to loosen one jaw. However, we recommend you loosen the three jaws at the same time. In this way you can protect them and will not damage the thread inside. Compound rest adjustment: Loosen the two screws. After you have obtained the angle you desire, please do not forgey to tighten them. Tailstock rest adjustment: When you are going yo change position or replace the tailstock, you need to loosen the nut. Replacement of carbon brushes: Replace the carbon brushed by removing the brush covers both on motor cover. Tool post adjustment: When you are going to asjust the tool post position, you only need to loosen the lever. After you have finished be sure to tighten. If you are going yo replace the work cutter then you need to loosen the screws with the allen wrench provided. Use the chuck to hold the workpiece firmly, and the cutter to start lath’s face cutting(edge of the cutter must be at the same height as the center). By changing the tool post angle and asjustig the compound rest, you can do internal cutting. After asjusting the angle of the compound rest, you can do bevel cutting. Use the chuck to hold the workpiece firmly. Then use the center to fix the other end. If you change the center to drilling chick you can start your drilling immediately. This is a quality mini mill Ideal for the professional engineer or model maker alike. The precision mini lathe is designed to preform various types of processing jobs. Counterface tuming, drilling, threading, and cutting jobs on materials made up of round bar and bar materials can be preformed with this machine. The machine can be used in areas such as mini precision parts processing, sample processing and modeling works. Note: This machine is suitble to use only from 12°C-35°C53.6-95. 1 X Mini Milling Machine. 1 X Mini milling machine base. 1 X Mini milling machine column. 1 X Tool kit with wrenches. The item “Mini Electric Milling Drilling Machine With Gear Drive Precision Vertical Tool” is in sale since Monday, November 12, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “globalfactoryshop” and is located in Rowland Heights, California. This item can be shipped to United States.

• Model: mini drilling/milling machine with lathe bed
• MPN: Does Not Apply
• Brand: Unbranded
• Function: Drilling, Milling
• Power Source: Electric
• Machine Type: Mini Milling Machine
• Motor Power: 550W
• Max.table travel: 10″/12250/300mm
• Max.cross slide: 4″/5″ 100/130mm
• Max.spindle travel: 7″ 180mm
• Spindle Speed: L:50-1100rpm H:120-2500rpm
• Taper of hole in spindle: *:MT #3 or R8
• Drilling Capacity: 1/2″ (13mm)
• End Milling Capacity: 5/8″ (16mm)
• Face Milling Capacity: 11/8″ (30mm)
• Longitudinal travel: 3.94″/10cm
• Cross travel: 9.84″/25cm
• Spindle stroke: 7.87″/20cm
• Working table size: 18.11″x4.41″/46x11cm
• Max distance spindle to table: 8.66″/22cm
• Spindle taper: MT3
• T-slot: 0.39″/1cm

This mini drilling/milling machine with lathe bed can handle most materials. It has a 550watt motor with variable speed drive, The working table with t-slots can enable clamping of workpieces and metric graduated compound scales. The machine also incorporates a tilting column which allows drilling/milling of workpiece at ±90° from vertical. It is supplied with 13mm chuck accessory kit. For adjusting and setting. The lathe bed is made of high grade iron. The rigidity of lathe, the handness and accuracy of the v-slideways are obtained by raw materials, heat hardening and grinding. This machine is DC motor driven. The spindle speed is variable from 20-2500rpm. The feed speed can be adjusted according to the requirements of different workpieces. Head swivels ±90° verticaly. Adjustable gibs on table precision. Adjustable stops on table. Straightforward gear drive mechanism. Extra wide cross table. Chuck Arbor Bolt provides tightening of drilling chuck through the spindle. Rack and pinion feed for drilling operations. Safety guard with microswitch according to EU-requirements. Available in metric leadscrews. START / STOP switch incorporates emergency STOP. Table travel:10/12250/300mm. Cross slide:4″/5″ 100/130mm. Spindle travel:7 180mm. Taper of hole in spindle :MT #3 or R8. Drilling Capacity:1/2 (13mm). End Milling Capacity:5/8 (16mm). Face Milling Capacity:11/8 (30mm). Longitudinal travel: 3.94/10cm. Cross travel: 9.84/25cm. Spindle stroke: 7.87/20cm. Working table size: 18.11″x4.41″/46x11cm. Max distance spindle to table: 8.66/22cm. T-slot: 0.39/1cm. Spindle rotary angle: -45°+45°. Dimension: 14.5″x 26.5″x27/37x67x68cm. Replcement of chuck: When replacing the chuck, place a cloth or a piece of wood on the bed way at the bottom of the chuck. This is to avoid damage to the bed way caused by carelessly dropping the chuck. Loosen the 3 set screws to replace the chuck. Replcement of jaws: There are two types of jaws: Internal and external. Please note that the number of jaws fit with the number inside the chuck’s groove. Do not mix them together. When you are going to mount them, please mount them in ascending order 1-2-3, when you are going to take them oit, be sure to take them out in descending order(3-2-1) one by one. After you finish this procedure, rotate the jaws to the smallest diameter and check that the three jaws are well fitted. If you need to reassemble them again as they are not properly assembled. When you are going yo mount the work piece you need only to loosen one jaw. However, we recommend you loosen the three jaws at the same time. In this way you can protect them and will not damage the thread inside. Compound rest adjustment: Loosen the two screws. After you have obtained the angle you desire, please do not forgey to tighten them. Tailstock rest adjustment: When you are going yo change position or replace the tailstock, you need to loosen the nut. Replacement of carbon brushes: Replace the carbon brushed by removing the brush covers both on motor cover. Tool post adjustment: When you are going to asjust the tool post position, you only need to loosen the lever. After you have finished be sure to tighten. If you are going yo replace the work cutter then you need to loosen the screws with the allen wrench provided. Use the chuck to hold the workpiece firmly, and the cutter to start lath’s face cutting(edge of the cutter must be at the same height as the center). By changing the tool post angle and asjustig the compound rest, you can do internal cutting. After asjusting the angle of the compound rest, you can do bevel cutting. Use the chuck to hold the workpiece firmly. Then use the center to fix the other end. If you change the center to drilling chick you can start your drilling immediately. This is a quality mini mill Ideal for the professional engineer or model maker alike. The precision mini lathe is designed to preform various types of processing jobs. Counterface tuming, drilling, threading, and cutting jobs on materials made up of round bar and bar materials can be preformed with this machine. The machine can be used in areas such as mini precision parts processing, sample processing and modeling works. This machine is suitble to use only from 12°C-35°C53.6-95. 1 X Mini Milling Machine. 1 X Mini milling machine base. 1 X Mini milling machine column. 1 X Tool kit with wrenches. We have warehouses in the USA. E-mails are answered Monday through Saturday. Please allow up to 48 hours for a response to your message 3. The item “Mini Milling Drilling Machine Variable Speed Gear Drive 550W 2500rpm Motor MT3″ is in sale since Wednesday, July 18, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “iddmart2011″ and is located in Rowland Heights, California. This item can be shipped to United States.

• Model: mini drilling/milling machine with lathe bed
• Function: Drilling
• Power Source: Electric
• MPN: Does Not Apply
• Machine Type: Mini Milling Machine
• Brand: Unbranded
• Motor Power: 550W
• Max.table travel: 10″/12250/300mm
• Max.cross slide: 4″/5″ 100/130mm
• Max.spindle travel: 7″ 180mm
• Spindle Speed: L:50-1100rpm H:120-2500rpm
• Taper of hole in spindle: *:MT #3 or R8
• Drilling Capacity: 1/2″ (13mm)
• End Milling Capacity: 5/8″ (16mm)
• Face Milling Capacity: 11/8″ (30mm)
• Longitudinal travel: 3.94″/10cm
• Cross travel: 9.84″/25cm
• Spindle stroke: 7.87″/20cm
• Working table size: 18.11″x4.41″/46x11cm
• Max distance spindle to table: 8.66″/22cm
• Spindle taper: MT3
• T-slot: 0.39″/1cm

Vintage Brown and Sharpe dividing head. I only have one of the plates. The item “Vtg Brown & Sharpe Dividing Head Milling Lathe Machine Index Gear” is in sale since Saturday, April 20, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rickcact” and is located in North Grosvenordale, Connecticut. This item can be shipped to United States.

• Non-Domestic Product: No
• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Brand: Brown & Sharpe

Hydraulic Hoses and Fittings. Lifting and Hanging Magnets. Lifts Jacks and Hoists. Magnetic Drills and Cutters. Motorcycle Lifts and Chocks. Pipe Cutting and Drilling. Pipe Stands and Vises. Pipe Threading Machine Parts. Rebar Cutting and Bending. SDS Drills and Bits. Erie Tools Variable Speed Mini Milling Machine Benchtop Drilling and Machining Gear Driven with Adjustable Depth Stop. Designed for drilling, deep milling and face milling with variable speed control. Drilling Capacity: 3/8 (10mm). End Mill Capacity: 3/8 (10mm). High-speed Steel 6-piece 4 Flute with 3/8 Shank set Included. Includes 1/8″, 3/16″, 1/4″, 5/16″, 3/8″ and 5/32″ sizes. Includes High Speed Steel 6-piece 4 Flute with 3/8 Shank set. Heavy duty variable speed mini milling and drilling benchtop machine comes standard with a high-speed steel 6-piece 4 Flute with 3/8 Shank cutter set. The set includes 1/8″, 3/16″, 1/4″, 5/16″, 3/8″ and 5/32″ size cutters. This mill has a Drilling and End Mill Capacity of 3/8″ along with a Face Mill Capacity of 5/8″. End Mill Capacity: 3/8. Face Mill Capacity: 5/8. Max X-Axis Table Travel: 8.5. Max Y-Axis Table Travel: 6.5. Max Z-Axis without collet: 10. Spindle Taper: MT #2. Spindle Stroke: 1 3/16. Table Size: 9.45″ x 5.70″. Spindle Speed: Low: 01000 RPM High: 02000 RPM. Motor Output Power: 150W. Designed for drilling, deep milling and face milling. Safety shut off switch. Fine feed hand wheel. Longitudinal feed hand wheel. A clear guard on the spindle. Rubber chip guards on ways. Zero setting dials read in inches. Chuck Capacity: 1/16″-3/8″. High-Speed Steel 6-piece 4 Flute with 3/8 Shank set. Spanner wrench for the spindle nut. This item usually ships UPS. Our live, friendly, experienced customer service team is ready to help! Customer Service Hours: 8:00 a. To 6:00 p. EST, Monday through Friday. Erie Tools Customer Service will respond to all customer messages during normal customer service hours. For help with any questions you may have. Before returning an item to receive an RGA number. Please clearly write the RGA# on the outside of the box so we can quickly process your return. Thank you for purchasing from Erie Tools! If you are satisfied with your shopping experience, please leave us 5-star feedback in any applicable category. We appreciate the time and effort it takes to leave us a 5-star review. The item “Erie Tools Mini Bench Top Mill & Drilling Machine Gear Driven, Adjustable Stop” is in sale since Tuesday, October 2, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “erietools” and is located in Toledo, Ohio. This item can be shipped to United States, Canada.

• MPN: ETD-SM-MILL
• Type: Blade
• Country/Region of Manufacture: China
• Net Weight: 112.000

Willard indexer, everything shown. The item “Willard Indexing Milling Machine Machinist Tool Gear Cutting Vintage Machinist” is in sale since Friday, February 1, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “1966megahertz” and is located in Schuylkill Haven, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

• Brand: Unbranded
• MPN: Dividing head
• Country/Region of Manufacture: United States

Variable Speed Milling Mill Machine Precision Vertical Turret Milling Machine. We offer you a superior drilling machine with digital display. Our mini drilling/milling machine with lathe bed can handle most materials. It features a 550watt motor with variable speed drive. The working table with t-slots enables to clamp workpieces and metric graduated compound scales. The machine also incorporates a tilting column which allows drilling/milling of workpiece at ±90° from vertical. It is supplied with 13mm chuck accessory kit for adjusting and setting. The lathe bed is made of high grade iron. The rigidity of lathe, the hardness and accuracy of the v-slideways are obtained by raw materials, heat hardening and grinding. Additionally, this machine is DC motor driven, with variable speed from 20-2500rpm. The feed speed can be adjusted according to the requirements of different workpieces. Use the chuck to hold the workpiece firmly. Then use the center to fix the other end. If you change the center to drilling chick you can start your drilling immediately. Use the chuck to hold the workpiece firmly, and the cutter to start lath’s face cutting(edge of the cutter must be at the same height as the center). By changing the tool post angle and adjustig the compound rest, you can do internal cutting. After adjusting the angle of the compound rest, you can do bevel cutting. This is a quality mini mill Ideal for the professional engineer or model maker alike. The precision mini lathe is designed to preform various types of processing jobs. Counterface tuming, drilling, threading, and cutting jobs on materials made up of round bar and bar materials can be preformed with this machine. The machine can be used in areas such as mini precision parts processing, sample processing and modeling works. Head swivels ±90° vertically. Adjustable gibs on table precision. Adjustable stops on table. Straightforward gear drive mechanism. Extra wide cross table. Chuck arbor bolt provides tightening of drilling chuck through the spindle. Rack and pinion feed for drilling operations. Safety guard with microswitch according to EU-requirements. Available in metric leadscrews. START / STOP switch incorporates emergency STOP. Drilling capacity: 13mm /0.51. Face milling capacity: 30mm /1.18. End milling capacity: 16mm/0.63. Longitudinal travel: 100mm/3.94. Cross travel: 250mm /9.84. Spindle stroke: 200mm /7.87. Working table size: 460 x 112mm/18.11 x4. Max distance spindle to table: 220mm /8.66. T-slot: 10mm /0.39. Spindle speed: 20 – 2500rpm. Spindle rotary angle: -45°+45°. Dimension: 368 x 673 x 685mm /14.5″x 26.5″x27. X-Axis Travel Bed: 300mm/11.81. Y-Axis Travel Bed: 140mm/5.51. Z-Axis Travel Bed: 220mm/8.66. Table Size: 460110mm/18.11″x4.33″. 1 x Complete drilling machine. 1 x Necessary tool kit. 1 x English manual. Sign up to newsletter. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “Mini Milling Drilling Machine Digital Display 20 2500rpm Gear Drive Variable” is in sale since Monday, January 14, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “love-happyshopping” and is located in Ontario, California. This item can be shipped to United States, Canada, Mexico.

• Brand: Vevor 1512025211970722
• MPN: XCXZZ00311512025211
• Country/Region of Manufacture: China
• Motor power: 550W
• Drilling capacity: 13mm /0.51 inch
• Face milling capacity: 30mm /1.18 inch
• End milling capacity: 16mm/0.63 inch
• Longitudinal travel: 100mm/3.94 inch
• Cross travel: 250mm /9.84 inch
• Spindle stroke: 200mm /7.87 inch
• Working table size: 460X 112mm/18.11 x4.41 inch
• Max distance spindle to table: 220mm /8.66 inch
• Spindle taper: MT3
• T-slot: 10mm /0.39 inch
• Spindle speed: 20 – 2500rpm
• Spindle rotary angle: -45 ~+45 degrees
• Dimension: 368X673X685mm /14.5 x 26.5 x27 inch
• X-Axis Travel Bed: 300mm/11.81 inch
• Y-Axis Travel Bed: 140mm/5.51 inch
• Z-Axis Travel Bed: 220mm/8.66 inch
• Table Size: 460*110mm/18.11×4.33 inch

GAP WILL DO 26″ SWING 3 PHASE 220 10″ 3 JAW CHUCK QUICK CHANGE TOOL POST WITH 4 HOLDERS BORING BARS INDEXABLE CUTTERS WITH CARBIDE INSERTS DRILL CHUCK CENTER FOLLOW REST STEADY REST AND MUCH MORE, THIS IS A GOOD HEAVY DUTY GEAR HEAD MAchine. Contact me with any questions. This as like a new machine quill looks new very little use. The item “ROYAL Gear Head Lathe 18 x 40 TooL Room Lathe -inch metric gap 26″ is in sale since Tuesday, December 4, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “jerbou-89″ and is located in Bristol, Connecticut. This item can be shipped to United States.

• Brand: royal
• Model: 1840
• Country/Region of Manufacture: United States
• MPN: Does Not Apply

Mini Drilling & Milling Machine 600W Motor Gear Drive. The included service is delivered to your address. Thanks for your kindly understanding! Head swivels ±90° vertically; START / STOP switch incorporates emergency STOP. Adjustable gibs on table precision; adjustable stops on table. Straightforward gear drive mechanism; 0-2500RPM spindle speed. Chuck arbor bolt provides tightening of drilling chuck through the spindle. Rack and pinion feed for drilling operations; metric leadscrews available. Safety guard with microswitch according to EU-requirements. Please slow down the machine before converting high-speed mode into low-speed mode, or the gear may break down. Distance Spindle to Table. 640 x 565 x 720mm. 1 x Milling Machine. 1 x Wrench (36). 1 x Drill Chuck. 1 x Handle Lever. 4 x Hex Wrenches (2, 2.5, 3, 4, 5, 6, 8). 1 x Hook Spanner (45-52). 1 x Double End Wrench (8-10, 13-16). 1 x Drill Chuck Wrench. 4 x T-shape Nuts. 4 x Nuts (M8). 4 x Double End Bolts (M8X60). 1 x Fuse (8A). Your kind consideration would be highly appreciated. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Parts must be resaleable and in the original packaging. We cannot take back used products. We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt. The item “Mini Drilling & Milling Machine 600W Motor Gear Drive” is in sale since Tuesday, December 4, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “acautoparts04″ and is located in Memphis,Anaheim. This item can be shipped to United States.

• Brand: preenex
• MPN: Does Not Apply

Here is a nice. Dividing / Indexing Head with a tail stock and 2 dividing plates. The head accepts #4 morse taper chuck or center. The thread OD for mounting a jaw chuck is 2.675 x 5 TPI. The dividing plates are 7-1/2 dia. The height of the centers are 5-1/8. The center on the tail stock has some damage (see last pic). The head weighs 85 lbs and the tail stock weighs 24lbs. The base of the head is 6-1/4″ x 8″. It stands 8-1/2 tall from the base to to the top of the body. This is also listed for sale locally so the listing could end at any time. Check the pictures for condition as the items we sell are used and may have marks or blemishes. Check out the other items in our store at LnL Deals. The item “Dividing Indexing Head & Tail Stock, Milling, Machinist Tool, Index, Gear” is in sale since Tuesday, December 18, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “lbkos14mvy” and is located in Elizabethtown, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Non-Domestic Product: No

Sign up to Newsletters. 550W Variable Speed Milling Mill Machine Precision Vertical Turret Milling Machine. This mini drilling/milling machine with lathe bed can handle most materials. It has a 550watt motor with variable speed drive, The working table with t-slots can enable clamping of workpieces and metric graduated compound scales. The machine also incorporates a tilting column which allows drilling/milling of workpiece at ±90° from vertical. It is supplied with 13mm chuck accessory kit. For adjusting and setting. The lathe bed is made of high grade iron. The rigidity of lathe, the hand. Ness and accuracy of the v-slideways are obtained by raw materials, heat hardening and grinding. This machine is DC motor driven. The spindle speed is variable from 20-2500rpm. The feed speed can be adjusted according to the requirements of different workpieces. When replacing the chuck, place a cloth or a piece of wood on the bed way at the bottom of the chuck, which helps to avoid damage to the bed way caused by carelessly dropping the chuck. Loosen the 3 set screws to replace the chuck. There are two types of jaws: Internal and external. Please note that the number of jaws fit with the number inside the chuck’s groove. Do not mix them together. When you are going to mount them, please mount them in ascending order 1-2-3, when you are going to take them out, be sure to take them out in descending order(3-2-1) one by one. After you finish this procedure, rotate the jaws to the smallest diameter and check that the three jaws are well fitted. If you need to reassemble them again as they are not properly assembled. When you are going yo mount the work piece you need only to loosen one jaw. However, we recommend you loosen the three jaws at the same time. In this way, you can protect them and will not damage the thread inside. Loosen the two screws. After you have obtained the angle you desire, please do not forgey to tighten them. When you are going yo change position or replace the tailstock, you need to loosen the nut. Replacement of carbon brushes. Replace the carbon brushed by removing the brush covers both on motor cover. Tool post adjustment: When you are going to a. Just the tool post position, you only need to loosen the lever. After you have finished be sure to tighten. If you are going yo replace the work cutter then you need to loosen the screws with the allen wrench provided. Use the chuck to hold the workpiece firmly. Then use the center to fix the other end. If you change the center to drilling chick you can start your drilling immediately. Use the chuck to hold the workpiece firmly, and the cutter to start lath’s face cutting(edge of the cutter must be at the same height as the center). By changing the tool post angle and a. G the compound rest, you can do internal cutting. Justing the angle of the compound rest, you can do bevel cutting. This is a quality mini mill Ideal for the professional engineer or model maker alike. The precision mini lathe is designed to preform various types of processing jobs. Ming, drilling, threading, and cutting jobs on materials made up of round bar and bar materials can be preformed with this machine. The machine can be used in areas such as mini precision parts processing, sample processing and modeling works. This machine is suit. Ble to use only from 12°C-35°C. Head swivels ±90° vertical. Adjustable gibs on table precision. Adjustable stops on table. Straightforward gear drive mechanism. Extra wide cross table. Chuck Arbor Bolt provides tightening of drilling chuck through the spindle. Rack and pinion feed for drilling operations. Safety guard with microswitch according to EU-requirements. Available in metric leadscrews. START / STOP switch incorporates emergency STOP. Drilling capacity: 13mm /0.51. Face milling capacity: 30mm /1.18. End milling capacity: 16mm/0.63. Longitudinal travel: 100mm/3.94. Cross travel: 250mm /9.84. Spindle stroke: 200mm /7.87. Working table size: 460X 112mm/18.11″x4.41″. Max distance spindle to table: 220mm /8.66. T-slot: 10mm /0.39. Spindle speed: 20 – 2500rpm. Spindle rotary angle: -45°+45°. Dimension: 368X673X685mm /14.5″x 26.5″x27. Size: 460110mm/18.11″x4.33″. Mini milling machine powertrain. 1 X Tool kit with wrenches. 1 X Mini milling machine base. Mini milling machine column. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “Mini Milling Drilling Machine With Gear Drive High Performance Durable Mt3″ is in sale since Monday, October 16, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “happykisssoul” and is located in Ontario, California. This item can be shipped to United States, Canada, Mexico, Germany.

• Brand: VEVOR
• MPN: ZCXZG007431505877746
• Model: MINI MILLING DRILLING MACHINE
• Country/Region of Manufacture: China
• Motor power: 550W
• Drilling capacity: 13mm /0.51 inch
• Face milling capacity: 30mm /1.18 inch
• End milling capacity: 16mm/0.63 inch
• Longitudinal travel: 100mm/3.94 inch
• Cross travel: 250mm /9.84 inch
• Spindle stroke: 200mm /7.87 inch
• Working table size: 460X 112mm/18.11 x4.41 inch
• Max distance spindle to table: 220mm /8.66 inch
• Spindle taper: MT3
• T-slot: 10mm /0.39 inch
• Spindle speed: 20 – 2500rpm
• Spindle rotary angle: -45 ~+45 degrees
• Dimension: 368X673X685mm /14.5x 26.5×27 inch
• X-Axis Travel Bed: 300mm/11.81 inch
• Y-Axis Travel Bed: 140mm/5.51 inch
• Z-Axis Travel Bed: 220mm/8.66 inch
• Table Size: 460*110mm/18.11×4.33 inch
• Weight: 80kg/176lbs
• UPC: 895801479731