HAAS TAILSTOCK W/4 CENTER HEIGHT W/ #3MT DEAD CENTER.

This Bridgeport milling machine tailstock is in excellent shape and has a center height of 8 inches. It is perfect for drilling and milling tasks and is suitable for use in the CNC, Metalworking & Manufacturing industry. The brand of this machine is Bridgeport and it is a model that is tailored specifically for milling machines. If you are looking for a reliable and efficient tailstock for your milling machine, this one is definitely worth considering. Its condition is impeccable, making it an excellent choice for those who value quality and performance. Get your hands on this machine today and take your machining tasks to the next level!

Motor: 0.2 HP. Drilling Capacity: 1/4 inch. Spindle Travel: 1-1/2 inches. Headstock Travel: 7-3/4 inches. Spindle to Column Distance: 6-1/2 inches. Spindle to Taper: JT1. Speed: Low Range 0-3600 RPM. High Range: 0-5000 RPM. Weighs about 31 pounds. Comes as shown in photos. Has a little surface rust. Tested to point of turning on but not tested further. Not sure if anything else is missing so please see pictures for details.

High Z Mod Bundle Z Axis Height Modification Bundle Kit for Lead CNC Wood Router. High Z Mod Bundle for Lead CNC. The High Z modification for the LEAD CNC brings your creative capabilities to new heights! With 8′ of clearance this modification can be adapted easily to your existing LEAD CNC Router. The structural design is rigid and capable of milling through hard woods, plastics, foam. The sky is the limit with your LEAD CNC, its time to take your projects to the next level! This modification is for the. 8′ of clearance for Z-Axis. Additional X-Carriage and C-Beam for added strength. Adjustable mounting configuration for Z-Axis. Rigid modification design including additional framing components for added strength. When using an extended bit we recommend the use of softer materials, such as wood and foam. However, you can lower the Z axis down and cut harder materials just like the. ” V-Slot ” and ” C-Beam ” are registered trademarks of OpenBuilds LLC as released under the Creative Commons Licence “Attribution-ShareAlike”. All our components are designed to work and are fully compatible with the products produced by OpenBuilds. Terms of Sale (VAT). (Recommend for bulk orders). Return must include all original package and accesorries, item must in good condition. We will work with you to until you are satisfied. We will try our best to solve your problem to your satisfaction. We are always here with you! This item is in the category “Computers/Tablets & Networking\3D Printers & Supplies\3D Printers”. The seller is “bulkman3d” and is located in this country: CN. This item can be shipped worldwide.

• Size: 1500mmx 1500mm
• Brand: BULK-MAN 3D
• Item Name: High Z Mod Bundle for Lead CNC
• Model Number: LD-CNC-HZ-
• Frame Material: 6063-T5 Aluminum
• Type: High Z Mod Bundle for Lead CNC
• Material: 6063-T5 Aluminum
• Country/Region of Manufacture: GuangDong of China
• Compatible Model: For Lead CNC Router
• Color: Silver
• Features: DIY Kit
• 3D Technology: FDM
• Interface: USB 2.0, USB 3.0, Wi-Fi

CNC 4th A Rotary Axis. Chuck: 50MM 3-jaw chuck. Speed reducing ratio: 4:1. Stepper motor: Two phase 42 stepper motor. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dembergear1″ and is located in this country: CN. This item can be shipped worldwide.

• Color: 4 axis add Tailstock
• Ships From: China
• Model: 5909237474
• Modified Item: No
• Spindle Horsepower: CNC 4th A Rotary Axis
• Country/Region of Manufacture: China
• Custom Bundle: No
• Machine Type: Milling Machine
• Table Length: CNC 4th A Rotary Axis
• Max Spindle Speed (RPM): CNC 4th A Rotary Axis
• Model Year: 2020
• Power Source: Electric
• X-Axis Travel Bed: CNC 4th A Rotary Axis
• Y-Axis Travel Bed: CNC 4th A Rotary Axis
• Z-Axis Travel Bed: CNC 4th A Rotary Axis
• MPN: 5909237498
• Spindle Taper: CNC 4th A Rotary Axis
• Power: Electric
• Function: Milling
• Size: 127MM*118MM*75MM
• Speed reducing ratio: 4:1
• Stepper motor: Two phase 42 stepper motor
• Weight: 2KG
• Center height: 44MM
• Certification: CE
• Brand: Unbranded
• Chuck: 50MM 3-jaw chuck
• Number of Jaws: 4
• Origin: CN(Origin)
• Table Width: CNC 4th A Rotary Axis
• Control: CNC
• Voltage: 220 V

THE HEIGHT AND ANGLE CAN BE ADJUSTED. THE MICRO-ADJUSTMENT KNOB ASSEMBLY IS MISSING. NO CRACKS OR REPAIRS. THERE ARE MEASUREMENTS IN THE PICTURES. MAKE SURE YOUR REGISTERED STREET ADDRESS IS CLEAR AND UP TO DATE WHEN YOU GO TO PAY FOR THIS ITEM. I WILL NOT CHANGE IT FOR YOU AFTER THE SALE. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “h.resale_llc” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Bulgaria, Czech Republic, Finland, Hungary, Estonia, Australia, Greece, Portugal, Cyprus, Japan, Sweden, Korea, South, Indonesia, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, New Zealand, Philippines, Switzerland, Norway, Ukraine, Croatia, Republic of, Malaysia, Iceland.

• Brand: Yuasa

SET OF 6 PARALLEL’S. Each parallel consists of two ground pieces which slide smoothly on each other and can be locked in position. They can easily be expanded to size in openings for quick reference measurements. They can also be used in pairs as parallels. Range of this set is 3/8″ – 2 1/4″. The item “RDGTOOLS 6PC ADJUSTABLE PARALLEL SET 3/8 X 2-1/4 HEIGHT RANGE MILLING TOOLS” is in sale since Thursday, August 27, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped worldwide.

• Country/Region of Manufacture: China
• MPN: Does Not Apply
• Treated Material: Steel
• Brand: RDGTools HBM Myford
• Control: Manual

One of machine tool accessories for dividing workpieces into equal partitions. By using dividing scale ring, vernier, locating pin, index plate and change gear, workpieces placed can be divided into equal partitions according to your demand. It can be used for direct and indirect dividing. Able to complete gear, face and flute processing without need of accessories, however its whole construction is the same with the universal type. Can complete 2, 3, 4, 6, 8, 12, 24 division indexing. Are attached along with the dividing head for indirect dividing in any division indexing 2-50, 51-380 except prime numbers and certain other numbers. The front of dividing head dimension. The tail of the dividing head dimension. Uantity of dividing plate’s hole Helical gear reduction ratio. 100% brand new, of good quality. Divide any angle by the direct, indirect or differential methods. Head stock swivels to all angles. Direct mounted index plate has 24 divisions. Headstock Taper: 7 B&S. Weight: 23 kg (50.7 lbs). Package Dimensions: 410235205mm (1698inch). 1 X Dividing Head Set. 3 X Dividing Plates. 1 X 125mm 3 Jaw Chuck. The item “BS-0 PRECISION SEMI UNIVERSAL DIVIDING HEAD SET 4 HEIGHT INCLUDES 5 CHUCK” is in sale since Tuesday, January 3, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “renewtopsolar” and is located in Cranbury, New Jersey. This item can be shipped worldwide.

• Note1: Buyers responsible for custom clearance.
• Note2: Buyers responsible for potential tariff.
• Model: Complete Dividing 5″ Head Set
• UPC: 607052788971
• Brand: DC HOUSE
• MPN: DCHOUSE09

This southbend milling machine features a 1hp motor, some tooling included, and is low enough to house in a standard basement. This has been used and maintained in good condition at a precision manufacturing company in easthampton, ma.

The item “Southbend Milling Machine, 1hp motor, some tooling included, low height” is in sale since Monday, November 25, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “cmor3455″ and is located in Florence, Massachusetts. This item can only be shipped to United States.