110V AL-360 Y-axis Horizontal Milling Machine Automatic Cutter Feeder 50/60HZ. Milling machine feeder is suitable for drilling and milling machine series. It has the characteristics of low noise, large torque, high speed, easy installation, flexible operation, beautiful appearance and so on, which meets the requirements of ergonomics. Installed on the milling machine, to provide smooth power to the milling machine, greatly improve the work efficiency. 3.3(8.5CM). 9.5″6.7″11(24CM17CM28CM). 11″8.3″13(28CM21CM33CM). 13.7lbs(6.2kg)/14.3lbs(6.5kg). Product Features & Advantages. When the speed adjustment efficiency is good and the props are cutting, the speed is smaller and the cutting surface accuracy is good and smooth; When it’s slow, the machine doesn’t shake. Excellent material selection and reasonable design. When working fast, the special device makes the transmission of plastic gears and electronic parts not damaged if the tool collides with the workpiece or reverses momentarily. Save time and effort. Low sound, no noise; No noise when switching directions left and right. Stripping saves time and effort, high speed, easy operation, and effectively improves work efficiency. Small size, easy installation, simple operation panel; The switch is waterproof, oil proof, dustproof protective cover, not easy to damage. Product Presentation & Details. Automatic power feeder for horizontal milling machine1. You can make order with no worry. Any concern just feel free to let us know, we’ll reply in 24 hours in normal condition. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Hope for your understanding. Please contact with us at first for more details. Defective & Damaged Products. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear.

Master Mill / Versa Mill Model B. With X Y Table. With Horizontal Mill Setup. We also are including a COPY of the 21 page catalog shown in the pictures ALONG with our 127 page Dumore Versa Mill instruction manual…. Master Mill is the predecessor to the Dumore version. They bought them out. We have both and I believe the accessories are universally used between them? But we don’t have enough accessories to be completely confident in that statement. This is the MODEL B is used on a 13″ to 20″ swing lathe. This machine has a 7″ x 7/8″ arbor for horizontal milling. The support is not found in the catalog we are providing. But there is a lot of arbor that is not used with support. We did show in one of our pictures what they are using for support. Also, they made a lot of different sized arbors inching 1″ and 1-1/4″ see pictures. We also found that most of our involute gear cutters require the 7/8 arbor, which this one has. The machine is great shape! The up and down movement, crank handle, on the tower is slightly bent at the top. IT HAS NO EFFECT on the use. The shaft has no backlash and is tight because of its split nut design. The feed table cross slide dose have some back lash. The motor included is from our inventory. Its a Jet 1/2 hp model with correct speed and spindle size. This was the standard size motor offered. There was a option for a 3/4 hp as well. Tested and works great. Wired 115v but can be switched 220v. The pulley is also the correct 6 model needed. We didn’t mount the motor for 2 reasons. 2 It appears the original motors, SCREW mounted into the motor frame to hold them on. We are going to let you decide how to handle this. The cured piece on the tower, with the dovetail and swivel is the motor mount. FEED TABLE : The Master Mill version is UNIQUE because is swivels 360 degrees!! Versa mill doesn’t do that. Its a fixed 90 degrees. The XY table is very heavy on its own. If you want to know exactly what the charge will be, please ask before checkout. If not, please ask.

DMG MORI NHX 4000 (2013). COORIDINATE SYSTEM ROTATION, 48 WORKPIECE OFFSETS PART PROGRAM STORAGE LENGTH 512 KB 1000 REGISTERABLE PART PROGRAMS IN TOTAL LOCATION: NEW JERSEY. M730BM W/ MAPPS (FULL FOURTH). 1 DEGREE; 2 PALLET STATIONS. CAT-40 (60) STATION TOOLCHANGER. COORIDINATE SYSTEM ROTATION, 48 WORKPIECE OFFSETS PART PROGRAM STORAGE LENGTH 512 KB 1000 REGISTERABLE PART PROGRAMS IN TOTAL. COOLANT SYSTEM – 2 PALLETS – 60 STATION AUTOMATIC TOOL CHANGER – DAIKIN CHILLER – CHIP CONVEYOR.

PLEASE LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF THE ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK AND I WOULD DO MY BEST TO ANSWER ANY QUESTIONS.

Product parameters – Name: electronic power feed, electronic feeders – Model: ALB-310SX (Horizontal) – Main motor power: 95w – Speed range: 0-200 – Maximum speed: 200RPM – Maximum torque: 450in-lb – Power Requirements: AC110V – Applicable models: horizontal turret milling machines, drilling and milling machine, other machinery. Note: Milling machine power feeding easy to install with low noise, large torque, high speed, convenient installation and flexible operation, good appearance, as to meet the requirements of ergonomics. Package Content: 1 x ALB-310SX X-Axis Power feed Milling drill Machine 200RPM 450in-lb 110V (as picture). Usually it cost about 35USD-50USD. Thanks for your understanding. If you receive defective item, please kindly notify us within 14 days.

I don’t think they ever used it. I imagine it was donated to them and never used. The operating condition is unknown. I can tell you I can not engage the vertical or longitudinal handwheel feeds. The cross feed cranks niceley. This is either a parts machine or a machine that with a little (or a lot) of work could be put to use. It is offered untested and with any and all faults. Estimated net weight 3600 lbs.

It’s simply to let you know I have parts available. It’s not taken apart yet so they are all for sale.

MB4000 Horizontal Mill is a top-tier machining solution designed for high-precision and efficient operations! Featuring a powerful 15,000 RPM spindle and a 6-Station Pallet Shuttle System, this machine excels in reducing cycle times and maximizing production efficiency. Low Hours (Cutting Aluminum). (2) 400mm x 400mm Pallets (Tombstones Not Included). Renishaw RMP600 Spindle Probe. Renishaw TS34 Tool Probe with Lenth Offset / Tool Breakage Detection. Mayfran Drum Filtering Chip Conveyor (Ideal for Machining Aluminum).

Explore the capabilities of the KEARNEY & TRECKER S-12 Vertical Milling Machine Head, a robust addition to your machine tool arsenal. Designed to complement the KEARNEY & TRECKER Horizontal Mill, this milling machine head offers precision and versatility for all your metalworking projects. Crafted with the attention to quality and durability, the S-12 Vertical Milling Machine Head is compatible with KEARNEY & TRECKER models, enhancing your fabrication process with its reliable performance. Whether you’re working on intricate parts or bulk production, this machine head is engineered to meet the demands of a dynamic workshop environment. Head is 50 taper with drawbar and tilts left and right and is driven by the spindle nose keys. 12 Width of mount opening. Cleaned and painted, very good condition. Head is coated with rust preventative.

ALSGS 110V 220V Power Feed for Horizontal Milling Machine X Y Axis ALB-310SX Product parameters – Name: electronic power feed, electronic feeders – Model: ALB-310SX (Horizontal) – Main motor power: 95w – Speed range: 0-200 – Maximum speed: 200RPM – Maximum torque: 450in-lb – Power Requirements: AC110V / AC220V, 50 / 60HZ (optional) – Applicable models: horizontal turret milling machines, drilling and milling machine, other machinery. Milling machine power feeding easy to install with low noise, large torque, high speed, convenient installation and flexible operation, good appearance, as to meet the requirements of ergonomics. We plug is three categories: US plug, UK plug, European plug. Our product is the default US plug. Please do tell us the needed voltage and the Plug type when you place order Package Content: 1 x ALB-310SX X-Axis Power feed Milling drill Machine 200RPM 450in-lb 110V / 220V (as picture). Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.