2 Hp Bridgeport Series 1 CNC Vertical Kneemill with 3-Axis Anilam Crusader II Controller. CONTROLLER NEEDS UNKNOWN REPAIR(S). 3-Axis CNC Control w/3x Sema Permanent Magnet DC ServoMotors. Type: MT-30M4-59 Spindle Motor: 2 Hp, 220/440V, 3 Ph, 60 Hz Spindle Speed (Variable): 55 – 4,200 RPM Showa Auto-Lube system 10″ x 50″ T-Slot Table Longitudinal Table Travel: 30″ Cross Saddle Travel: 15″ Vertical Knee Travel: 16″ Spindle Nose: R-8 Spindle Quill Travel: 5″ Spindle Quill Feeds (3x): 0.006″, 0.003″, 0.045″ Ram Travel: 22″ Overall Dimensions: (LxWxH) 65″ x 70″ x 95 (CNC Controller Needs Repair). SPEC’S SUBJECT TO FINAL INSPECTION. IF WE HAVE NOT DONE SO, PLEASE LET US KNOW WHAT WE NEED TO DO THAT’LL ENABLE YOU TO PROVIDE. WE’LL DO OUR VERY BEST TO MAKE IT SO! The item “Bridgeport 2 Hp CNC Vertical Knee mill 10×50 table withAnilam 3-Axis Controller” is in sale since Monday, January 11, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rj-equipment” and is located in Cedarburg, Wisconsin. This item can be shipped to United States.

• Model: 2 Hp Series I Turret Kneemill
• Modified Item: No
• Spindle Horsepower: 2 hp
• Country/Region of Manufacture: United States
• Machine Type: Vertical Milling Machine
• Table Length: 50
• Max Spindle Speed (RPM): 4001 – 4500
• Model Year: 1990
• Power Source: Electric
• X-Axis Travel Bed: 26 in – 30 in
• Y-Axis Travel Bed: 16 in – 20 in
• Z-Axis Travel Bed: 16 in – 20 in
• Spindle Taper: R8
• MPN: Does Not Apply
• Serial Number: 231418
• Function: Drilling
• Brand: Bridgeport
• Table Width: 10 in – 14.9 in
• Control: CNC
• Voltage: 208-230/460

Milling Machine Riser Block 4 for Bridgeport-Type Knee MIlls 4inch. Milling Machine Riser Block 4. For Bridgeport-Type Knee Mills. Includes 4 bolts and cross member (spider). The bolts (qty: 4) are hex head bolts 1/2 in diameter and can thread into the spider. The base diameter is 15 inch (380mm). The shoulder diameter is 12.48 (317mm). The inside diameter is 10 (255.9mm). The rectangular bolt pattern is 9 5/8″ x 6 3/4″. 2015-12-29 Application Note: Some customers with original Bridgeports installed the riser block without modification, however, a recent customer with 1960 Bridgeport Series 1 J-head reports that this riser block’s bolt pattern is correct, but the bore needs to be enlarged to accept the Bridgeport’s turret. In light of this information, please budget your time accordingly. We’ll keep this note updated as more information comes in. Please note: Actual paint color of the riser block MAY VARY from the photos. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “Milling Machine Riser Block 4 for Bridgeport-Type Knee MIlls 4inch” is in sale since Saturday, January 9, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped worldwide.

• Brand: EISEN
• MPN: S2-RB-4″
• Country/Region of Manufacture: Taiwan

Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router Milling Edge Tech. Square the head of a milling machine quickly and easilySimply lower unit to the table and adjust the head until both indicators read the sameSized perfectly to fit the bed of a 6″ vise allowing the head to be trammed to the vise instead of the tableCan be used with a sine bar or sine plate to adjust the head to precise anglesCalibration procedure accounts for any error introduced by worn colletsGuaranteed to be equal to or better than any other tramming method or spindle squaring device availableLarge 2.2″ easy to read indicator faceBody made from red anodized aluminiumIncludes calibration gauge and padded caseThe Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate – Tramming is the process of squaring the head of your mill to the table. Most machinists know that if your mill is not trammed properly, surface finishes will be poor and parts will not be flat or square. Most machinists also know that conventional tramming techniques can be tedious and time consuming. The Pro Tram solves these issues allowing you to tram your mill quickly and accurately. To use the Pro Tram simply lower the unit down onto the table and adjust the head until both indicators read the same number. Repeat this process for the opposite axis and you are done. The Pro Tram is also sized perfectly to fit the bed of a 6 inch vise allowing you to tram the head to the vise instead of the table. If you want to spend less time tramming your mill and more time machining parts then you need the Pro Tram by Edge Technology. Key SpecificationsShank Size – 1/2 inch. Graduation – 0.0005inch. Gauge repeatability – 0.0002 inch. Between Centres – 5 inch. Edge Technology Pro Tramming Gauge for accurately setting milling head square. We offer full UK support on all the products we sell. Same day despatch on all items ordered before 15:00 GMT. Square the head of a milling machine quickly and easily. Simply lower unit to the table and adjust the head until both indicators read the same. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Large 2.2 easy to read indicator face. Body made from red anodized aluminium. Includes calibration gauge and padded case. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate – Tramming is the process of squaring the head of your mill to the table. Shank Size – 1/2 inch. Machine DRO are suppliers of Digital Readout Systems, Measuring Tools, Machine Tools. Established in the UK in 2003 and we pride ourselves on providing top quality tools and equipment with professional customer service and support to both professionals and hobbyists. The item “Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router Milling Edge Tech” is in sale since Tuesday, August 7, 2018. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machine_dro” and is located in Hoddesdon. This item can be shipped worldwide.

• Brand: Edge Technology
• MPN: 09-000
• Manufacturer Part Number: 09-000
• Part Number: ME-ED-09-000
• Type: Tramming
• Weight (Grams): 950.000000

Gorton 10×42 milling machine 2hp 240v 3phase. Includes B&S taper 703-2 collet chuck with 10 collets and wrenches. Table is decent as are the ways. Runs fine, no power feeds. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Please check out my other auctions. Call three one four seven five zero one four zero three with questions. Items not picked up within 60 days will be resold. The item “Gorton 1-22 mastermil 10×42 milling machine with collets Bridgeport knee type” is in sale since Friday, December 27, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ddmo1″ and is located in Millstadt, Illinois. This item can be shipped to United States.

• Machine Type: Milling Machine
• Function: Milling

The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that¡¯s why our customers keep coming back. The item “AS-250 X AXIS POWER FEED KNEE MILLS FOR BRIDGEPORT MILLING MACHINE 0-200 RPM” is in sale since Friday, March 5, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “vipshopmarket” and is located in Westbury, New York. This item can be shipped to United States.

• Voltage: 110V
• Rotate speed: 0-200 RPM
• Torque: 150 lbs
• Package size: 13″x8″x7″
• Gross weight: 6.5 kg(14.3 lb)
• Warranty: 5 Years
• Function: Milling
• Machine Type: Milling Machine
• Power Source: Electric
• Control: Manual
• Brand: VEVOR
• Model: AS-250-150
• MPN: ZCXZG0085

Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router Milling Edge Tech. Square the head of a milling machine quickly and easilySimply lower unit to the table and adjust the head until both indicators read the sameSized perfectly to fit the bed of a 6″ vise allowing the head to be trammed to the vise instead of the tableCan be used with a sine bar or sine plate to adjust the head to precise anglesCalibration procedure accounts for any error introduced by worn colletsGuaranteed to be equal to or better than any other tramming method or spindle squaring device availableLarge 2.2″ easy to read indicator faceBody made from red anodized aluminiumIncludes calibration gauge and padded caseShank Size – 1/2 inchThe Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate – Tramming is the process of squaring the head of your mill to the table. Most machinists know that if your mill is not trammed properly, surface finishes will be poor and parts will not be flat or square. Most machinists also know that conventional tramming techniques can be tedious and time consuming. The Pro Tram solves these issues allowing you to tram your mill quickly and accurately. To use the Pro Tram simply lower the unit down onto the table and adjust the head until both indicators read the same number. Repeat this process for the opposite axis and you are done. The Pro Tram is also sized perfectly to fit the bed of a 6 inch vice allowing you to tram the head to the vice instead of the table. If you want to spend less time tramming your mill and more time machining parts then you need the Pro Tram by Edge Technology. Key SpecificationsGraduation – 0.001inchGauge repeatability – 0.0002 inchBetween Centres – 5 inch. Edge Technology Pro Tramming Gauge for accurately setting milling head square. We offer full UK support on all the products we sell. Same day despatch on all items ordered before 15:00 GMT. Square the head of a milling machine quickly and easily. Simply lower unit to the table and adjust the head until both indicators read the same. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Large 2.2 easy to read indicator face. Body made from red anodized aluminium. Includes calibration gauge and padded case. Shank Size – 1/2 inch. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate – Tramming is the process of squaring the head of your mill to the table. Graduation – 0.001inch. Gauge repeatability – 0.0002 inch. Between Centres – 5 inch. Machine DRO are suppliers of Digital Readout Systems, Measuring Tools, Machine Tools. Established in the UK in 2003 and we pride ourselves on providing top quality tools and equipment with professional customer service and support to both professionals and hobbyists. The item “Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router Milling Edge Tech” is in sale since Monday, July 30, 2018. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machine_dro” and is located in Hoddesdon. This item can be shipped worldwide.

• Brand: Edge Technology
• MPN: 01-000
• Manufacturer Part Number: 01-000
• Part Number: ME-ED-01-000
• Type: Tramming

Bridgeport 2J 48″ Vertical Knee Milling Machine CNC Vari-Speed Q-Trvl:5″ AutoFed. Please send the following info. This item comes in non-original packaging. It has scuffs and scratches from normal use. This mill currently only runs manually. The electrical portion, controller, auto-feed do not work. When the power is applied (depressing the appropriate breaker) the spindle ran smoothly and the speed can be adjusted normally. All the 3-axis (X, Y, Z) manually move easily with no problems. All the other manual levers and adjustments work well. When the controller boots up displaying, “waiting for BMDC–6″, it then displays the three-axis counters, but comes up with an error, “GP Fault – Fatal Error”, both seen in the images. We can not get past this point. If a number is typed in at this point and entered the screen goes blank. We did notice that the internal hard drive is disconnected, as seen in the image. We could not find any place to connect it to. Since we could not get past this point, none of the axis motors or controller module was tested. One of the head assembly bolts is broken off, also seen in one of the pictures. No further testing was performed. No manuals, cords/cables, or additional items are included if not listed or shown. (1) Bridgeport 2J 48 Vertical Knee Milling Machine. Table Size: 48″ x 9″. Low: 120 – 500. High: 900 – 3000. High Red Zone: 3300 – 4200. Auto-Feed: X, Y Z-Axis. For questions regarding this item, please reference the SKU to help us better serve you. DougDeals Terms and Conditions. DougDeals Terms of Use. Items are described to the best of our ability. Items that have not been tested may or may not work properly. Items listed for parts or repair may or may not have additional defects of which we are not aware. DougDeals reserves the right to refuse service to anyone that does not comply with the terms listed and linked here. The sole and exclusive venue for any lawsuit arising out of or relating to this agreement shall be the Travis County Civil Courts of Travis County, Texas. The item “Bridgeport 2J 48 Vertical Knee Milling Machine CNC Vari-Speed Q-Trvl5 AutoFed” is in sale since Thursday, March 11, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “athomemarket” and is located in Leander, Texas. This item can be shipped worldwide.

• Brand: Bridgeport
• MPN: 2J

Tested and works as it should. Has Power feed on X axis. Task light included, does not work. Other motions and screws turn freely and are not sloppy. A speed RPM 78-197 in first 155-555 in Second. BULLSEYE INDUSTRIAL SALES, LLC. Bullseye Industrial Sales is proud to be a dedicated supplier to the manufacturing industry. We are a leading source for quality new and used equipment. We understand that keeping your equipment running is vital keeping your customers happy and we can provide equipment or replacement parts to get your machine or next project back on schedule. We get hundreds of items in daily, if we dont have it today check back tomorrow. Next Day & Second Day Air Services are available. We choose the carrier. Will there be a dock or forklift. Please make sure that we have the BOL. Prefer to pick it up yourself? You are welcome to do so, by appointment. We will load it free of charge unless otherwise stated in the listing. After the return period has ended, you can no longer return the product. Unless otherwise specifically agreed to in writing by. All goods are so “AS IS’ and “WITH ALL FAULTS meaning, without limitation, that. Which extend beyond the description of the goods on the face hereof; and. The item “Enco 100-1527 2HP 220V 3Ph 9 x 42 Multi Speed Knee End Mill Machine See Info” is in sale since Friday, October 23, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “bullseyeindustrialsales” and is located in Middlebury, Indiana. This item can be shipped to United States.

• Brand: Enco
• Country of Manufacture: China
• MPN: 100-1527

Milling Machine Riser Block 6 for Bridgeport-Type Knee Mills 6inch. 6 Milling Machine Riser Block. For Bridgeport-Type Knee Mills. Includes 4 bolts and cross member (spider). The bolts (qty: 4) are hex head bolts 1/2 in diameter and can thread into the spider. Please check drawing for dimensions. The base diameter is 15 inch (380mm). The shoulder diameter is 12.48 (317mm). The inside diameter is 10 (255.9mm). The rectangular bolt pattern is 9 5/8″ x 6 3/4″. Please note: Actual paint color of the riser block MAY VARY from the photos. 2015-12-29 Application Note: Some customers with original Bridgeports installed the riser block without modification, however, a recent customer with 1960 Bridgeport Series 1 J-head reports that this riser block’s bolt pattern is correct, but the bore needs to be enlarged to accept the Bridgeport’s turret. In light of this information, please budget your time accordingly. We’ll keep this note updated as more information comes in. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “Milling Machine Riser Block 6 for Bridgeport-Type Knee Mills 6inch” is in sale since Friday, October 16, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped worldwide.

• Brand: FLAIR
• MPN: S2-RB-6″
• Country/Region of Manufacture: Taiwan

In good working condition. Available for inspection under power in our Amityville, NY shop. Thank you very much for looking! Please check out my other listings. The item “Bridgeport Vertical Knee Mill with Power Feed and Tractools DRO” is in sale since Tuesday, January 19, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “precisionsignsny” and is located in Amityville, New York. This item can’t be shipped, the buyer must pick up the item.

• Spindle Horsepower: 1 hp
• Country/Region of Manufacture: United States
• Machine Type: Milling Machine
• Table Length: 32
• Max Spindle Speed (RPM): 2501 – 3000
• Model Year: Unknown
• Power Source: Electric
• X-Axis Travel Bed: 26 in – 30 in
• Y-Axis Travel Bed: 10 in – 15 in
• Z-Axis Travel Bed: 16 in – 20 in
• Spindle Taper: R8
• Function: Drilling
• Brand: Bridgeport
• Table Width: 9
• Control: Manual
• Voltage: 220