1988 Fadal VMC 4020 High Torque Vertical CNC Mill. Fadal Vertical Machining Centers were made in the USA and were designed and built to give you the maximum in useful performance. Every element meets the highest standards of quality, productivity and reliability. Virtually every component in the Fadal VMC is American made, to strict quality standards. The standard VMC 4020 offers excellent performance for jobs up to 40″ x 20″ in size. This machine has a 48″ x 20″ work table and occupies a floor space of 116 inches wide by 87 inches deep. CNC 88 High Speed Control. Built In Work Light. Full Enclosure Splash Guards. Process Completion Flashing Lamp. Automatic Way Lubrication System. 21-Station Automatic Tool Changer. Floor to Table Surface. 5 x 0.687″ x 3.75″. Cutting Feed Rate (X/Y/Z). 0.01 to 400 ipm. Rapid Feed Rate (X/Y/Z). Maximum Weight on Table. 3, 6 41 lbs. Axis Drive Motor (X/Y/Z). AC 3,800 Lb s. Spindle Nose to Table. Spindle Center to Column. 22.5 HP, 16.8kW (Peak). 10,0 00 rpm. Machine Floor Space Dimensions. Machine Width x Depth. 1 0 , 5 00 lbs. 80 psi, 15 scfm. 45 Amps, 230/440 VAC, 3-Phase. Specifications subject to verification. As with any piece of equipment, new or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item’s cosmetic condition. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Listed on every item are the directions and information needed to do so. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 116″ x 87″ x 95H. MACHINE WEIGHT: 10,500 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. We reserve the right to end a listing early if the item sells through another outlet. All specifications and description of said goods are approximate only. MACHINE USE AND SAFETY. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability, quality, and we back our equipment with a thirty day return privilege to assure your satisfaction. Our address is 20933 Plummer Street Chatsworth, CA 91311. DIRECT CAPITAL provides equipment financing for our customers. For both new and used equipment. The item “FADAL VMC 4020 High Torque CNC VERTICAL MILL 40×20 Made in USA, (Haas VF-3)” is in sale since Monday, November 21, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Fadal
• Country/Region of Manufacture: United States
• Model: VMC 4020HT
• Serial No.: 8807007

NICE USA MADE DIVIDING HEAD W. The item “NICE USA MADE DIVIDING HEAD W. CUSHMAN 4 CHUCK” is in sale since Friday, March 04, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “randc_inc” and is located in California. This item can be shipped to United States.

Small Horizontal Milling Machine 3/8 arbor. Base is 7½ x 8½. About 10 high at tip of screw. Table is 2½” x 5½”. Includes 4 t-slot nut/bar. Side of table stamped: Made in Western Germany. Plate on base reads: A. Fineisen – Small Tool Specialties – Cambria Heights II, N. Table is true and smooth. Arbor shaft is true, no play, spins freely with no funny noises. Table feed x handwheel handle is not original. Vertical slide is smooth. It will need gone over, adjusted & cleaned up. It’s been around and not perfect. That’s a 2 liter soda bottle for size reference. You get what you see in the photos. Any questions just ask. The item “Vintage Small Horizontal Milling Machine Made Germany Mini Micro Miniature Mill” is in sale since Sunday, January 03, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “clockworktoyshop” and is located in Dalmatia, Pennsylvania. This item can be shipped to United States.

This machine is a 9 X 48 ACRA and is made in Taiwan in the same factory as Bridgeports are made. It is the only mill with all parts interchangeable with Bridgeports. NEW BRIDGEPORT PRICE IS OVER 16,400.00. YOU CAN COME TO OUR PINELLAS PARK STORE AND INSPECT ONE. I CAN ALSO SELL YOU THE FULL LINE OF HARDINGE MANUAL LATHES AT 1/2 THE COST HARDINGE CHARGES YOU. Travel – X Axis 36″ / Y Axis 12″ / Knee 16″ / Quill 5″, 18.5 MAX DISTANCE UNDER SPINDLE. Hardened ground Ways and Gibs. Class 7 Spindle Bearings. 60-4200 Variable Speed Drive. Head Tilt LeftTo Right 90 Degrees. Head Tilt Front To Back 45 Degrees. Chrome Quill with Precision Honed Head. One Shot Lube System. We have partnered with Direct Capital. To help you get the machines you need. Only takes a few minutes to get approval. Servo 140 Power Table Feed for X, Y and Z axis. Servo Power Table Feed for X and Y axis. Dynamo Power Table Feed for X, Y and Z axis. 2 and 3 Axis CNC Control. IMPORT DRO, POWER DRAW BARS, VISEA, COLLET SETS, CLAMP SETS AND IMPORT POWER FEEDS ARE AVAILABLE UPON REQUEST. I DO HAVE ONE IN STOCK WITH 3 AXIS DRO AND X & Y POWER TABLE FEED FOR 11,500.00. See other items in our e-Bay store. Be sure to add me to your favorites list. I HAVE OVER 1000 ITEMS IN MY E BAY STORE. IF YOU CAN NOT FIND WHAT YOU WANT. JUST ASK, Visit store: G and G MACHINERY. WE WELCOME INSPECTIONS AND CUSTOMER PICK UPS. WE ACCEPT ALL MAJOR CREDIT CARDS!! I offer an exclusive thirty-day return privilege. G&G Machinery has no further obligations to the item. Option to repair is at dealer’s discretion. All third-party charges are not refundable. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Sellers: Get your own map of past buyers. Sellers: Add a FREE map to your listings. The item “NEW, BRIDGEPORT CLONE VERTICAL MILL, MILLING MACHINE, MADE IN SAME FACTORY AS BP” is in sale since Thursday, March 08, 2012. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “ggmachine” and is located in Pinellas Park, Florida. This item can be shipped to United States.

• Brand: ACORD
• Model: ACM2-J
• MPN: 9X48
• Country of Manufacture: Taiwan, Province of China

Winner will get all items shown in photo. Please enlarge photo and feel free to ask any questions. ALL THE TOLD ME IS THERE IS ALOT OF CARBIDE END MILLS. I WAS GOING TO LIST THEM IN SMALL LOTS BUT I JUST DON’T HAVE THE PATIENCE. MY LOSS YOUR GAIN. NO RESERVE AND GOOD LUCK. The item “BIGGEST Machinist Tool Lot EVER! Made in U. S. A Carbide End Mill Bit + MORE” is in sale since Friday, November 20, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “airjordan2006″ and is located in Northridge, California. This item can be shipped to United States.

Here’s a rare Hamilton Associates Horizontal Milling Machine. These were made in Baltimore MD in the 1960′s and 1970′s. Hamilton marketed these primarily to schools, and as such, few survive today and virtually none in this condition. Machine operates perfectly and is 99% original. Wiring has been checked and is all in good condition. There is a safety interlock that cuts the power when the belt guard is removed. The switch is connected but is not currently operational. This machine has been completely disassembled with the exception of the spindle. Everything has been cleaned and inspected, re-lubricated and reassembled and adjusted. Just plug it in and start making chips. Machine is 14″ tall to the top of the column, 22″ tall to the top of the switch, 16 deep. Table is 2-3/4 x 14 Total weight is approx. Motor is the original 1/3 HP Westinghouse. Takes inexpensive and easy to find #1 Morse Taper collets and tooling. Comes with a 1MT 1/2 Arbor, spacers, a few cutters, 1MT Shell Mill holder and some Brown & Sharpe shell mills. Even has the original vise. See my other listings for a matching Hamilton Vertical Milling Machine. I also have a Hamilton 6 Metal Lathe that will be listed as soon as some minor repairs have been completed. It will need to be partially disassembled for safe packing. This machine operates on 120v and has a standard 3 prong NEMA 5-15p plug. The item “Hamilton Associates Benchtop Horizontal Milling Machine. Made in USA” is in sale since Wednesday, October 14, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “rapple1066″ and is located in Monroe, New York. This item can be shipped to United States.

• Brand: Hamilton Associates
• Model: Horizontal Miller

Here’s a rare Hamilton Associates Vertical Milling Machine. These were made in Baltimore MD in the 1960′s and 1970′s. Hamilton marketed these primarily to schools, and as such, few survive today and virtually none in this condition. Machine operates perfectly and is 99% original. The knob that locks the countershaft was replaced as the old plastic one had deteriorated beyond repair. Wiring has been checked and is all in good condition. The pinion gear that operates the quill down feed has some minor damage because it had been loose. It has been tightened and re-adjusted and it operates fine. This machine has been completely disassembled with the exception of the spindle. Everything has been cleaned and inspected, re-lubricated and reassembled and adjusted. Just plug it in and start making chips. Machine is 24″ tall, 21″ deep. Table is 2-3/4 x 14 Total weight is approx. Motor is the original 1/3 HP Westinghouse. Takes inexpensive and easy to find #1 Morse Taper collets and tooling. Comes with a 1MT Shell Mill holder and some Brown & Sharpe cutters. Even has the original vise. See my other listings for a matching Hamilton Horizontal Milling Machine. I also have a Hamilton 6 Metal Lathe that will be listed as soon as some minor repairs have been completed. It will need to be partially disassembled for safe packing. The item “Hamilton Associates Benchtop Vertical Milling Machine Made in USA” is in sale since Wednesday, October 14, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “rapple1066″ and is located in Monroe, New York. This item can be shipped to United States.

• Brand: Hamilton Associates
• Model: Vertical Miller

LOT OF SHOP MADE SLITTING SAW ARBORS 1/2 , 5/8 X 1 1/2 W/ 3/4 & 1 SHANK. Size : 1/2 , 5/8 X 1 1/2 7/8. Shank : 3/4 & 1. The item “LOT OF SHOP MADE SLITTING SAW ARBORS 1/2, 5/8 X 1 1/2 With 3/4 & 1 SHANK” is in sale since Monday, July 27, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “randc_inc” and is located in El Monte, California. This item can be shipped to United States.

1991 FADAL VMC-40 CNC VERTICAL MACHINING CENTER. Max Weight On Table………………. 0.01 – 375 IPM (X, Y, Z). 10k oil mist spindle. Spindle Nose To Table…………….. Automatic Tool Changer Positions…… 98″ x 87″ x 94, 8,500 Lbs. Also includes a kurt d675 vise. The item “Sweet 1991 FADAL VMC 40 CNC MILL 22×16 Travels, 10K rpm, Box Ways, Made in USA” is in sale since Thursday, July 16, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “uniqutoolin2014″ and is located in Brea, California. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Fadal
• Model: VMC 40
• Country of Manufacture: United States
• Serial No.: 9103072
• Year: 1991