feed Subscribe to feed
pic
8. 09
2023

CNC DIY Engraving Cutting Marking Machine 1M1M 80W Laser Module With Z Axis

Written by: admin - Posted in: engraving - Tags: , , , , , , ,
CNC DIY Engraving Cutting Marking Machine 1M1M 80W Laser Module With Z Axis


Added chain, no need to worry about cable when engraving. The maximum engraving an area to achieve 100 100CM. Aluminum material, acrylic produced. It can adjust laser power by software. 100100 ultra large engraving area, gantry shape design, no engraving height limitation. Three stepper motor drive providing faster moving speed. Engraving power and long-term available. Can print any pictures easily. The software can directly import pictures, enter text, support simple dxf file. This machine is a full set of parts, required installed on their own, giving the purchaser to install software and tutorials. Sysytem Support;Win XP/7/8/10. Engrave Mode:Photo, Word, Scan, outline, Pixel Laser Engraving. Supported Formats:jpg, bmp, svg, G-code. Material:Stainless Steel and Acrylic. Working Voltage:DC 12V. Working Current:DC 5A. Laser Power:15W/30W/40W(Fixed Focus). Control Software System :CNC software. Engraving Area:100x100cm / 39.37 x 39.37inch (maximum). Optical Power Output:10w. Laser Tube: LD FAC C-Lens. Beam Shape:Dot (Fixed Focus). Operating Voltage:DC 12v. Module Size:40mm X 40mm X 152mm. Cooling Mode:12v 10000 Rpm 40mm Cooling Fan. Focus:0.080.08. Input Interface:xh2.54-3pin (+, -, Pwm/ttl). TTL Output Power:> 1k Hz Output Power = Continuous Power X 40%. Laser Class:class IV. Safe Temperature Range:15? Life Time:1500020000 Hours. Laser Cable Length:80cm. Heatsink Material:Aluminum + PCTG. Anti-static: Up To 25kv Static Electricity Can Be Eliminated. Shell: Frosted Material, Good Heat Dissipation. Magnetic Blower Protective Shell:constitutes An Air Duct, Has Good Heat Dissipation, And Protects Eyes And Lasers. Engraving Parameters Of Different Materials (For Reference Only). Plywood 2mm cut : 500mm/min, S1000, 1 Pass. Plywood 3mm cut : 450mm/min, S1000, 1 Pass. Plywood 4mm cut : 400mm/min, S1000, 1 Pass. Plywood 5mm cut : 240mm/min, S1000, 1 Pass. MDF board 3mm cut : 180mm/min, S1000, 1 Pass. MDF board 3mm cut : 120mm/min, S1000, 2 Pass. Black acrylic plate 3mm : 120mm/min, S1000, 1Pass. Black acrylic plate 5mm : 120mm/min, S1000, 2Pass. Two-axis board connection diagram. Three-axis board connection diagram. Control Board–GRBL 2 Axis. UPgrade:Control Board–GRBL 3 Axis:(Work with Z axis kits).

31. 07
2023

130W Laser Module CNC Router Laser Engraving Machine 1M1M Woodworking Area

Written by: admin - Posted in: 130w - Tags: , , , , , , , ,
130W Laser Module CNC Router Laser Engraving Machine 1M1M Woodworking Area


Cloud L10 laser engraver has 10W/20W machine power and 10W+ continuous pulse output power. With air assist and precise focus, Cloud L10 laser engraving machine is capable of cutting a 10mm wood board and a 5mm black acrylic board in ONE PASS. Large working area, no Engraving Height Limitation. 10001000mm is the largest engraving area on the market. At the same time. You can engrave on more than 100 materials such as balsa, wood, plastic, leather, black acrylic, etc. Dual mode selection to meet different engraving needs. Support laser mode and cnc mode, you can choose according to your needs. It can also be matched with a rotation axis to carry out your creation on a cylinder. Unleash your creativity to meet your various needs. Sturdy strcture, easy installation. You only needs 6 screws to complete the installation, also can install other accessories according to your needs. Support Wireless, Computer and Other System Control. Machine Model: Cloud L10. Minimum Machine Size: 12201275222mm. Laser Z Plate Adjustment Range: 135mm. Xy Maximum Stroke: 1000mm 1000mm. Minimum Package Weight 16 Kg. Body Material: All-metal Aluminum Alloy Body. Power Supply Size: 100-220V 24V 5A. Material: aluminum alloy + plastic. Spot form: Punctiform, fixed focus. Input voltage: 12V 3.2A / 24V 1.7A. Input port: XH2.54-3P socket. Interface parameters: support TTL signal control power. Laser module net weight: 300g. Laser Spot :0.08 0.10mm. Light Path: Focused Beam. Laser Beam Mode:Dotted. Laser Diode:4 Beam. Focal Length:40(±1mm). Laser Cable:80cm 3p-4p. Working Mode:Pulse work. Product Material: Aluminum 6061. XY Limit switch pre-assembled. The L10 machine is pre-installed with a limit switch device on the xy axis, which can realize the homing or positioning function, which is very helpful for repeated positioning.

24. 06
2023

40With80W Laser Module CNC Router Laser Engraver Machine 1M1M Large Frame DIY

Written by: admin - Posted in: 40with80w - Tags: , , , , , , , ,
40With80W Laser Module CNC Router Laser Engraver Machine 1M1M Large Frame DIY


You May Also Like. 80W Laser CNC Desktop Laser Engraver Printer Wood Router Laser Cutting DIY Tool. 450nm 40W/80W Laser Module CNC Router Laser Engraver Machine Large Frame 1M1M. 80W Air Assist CNC Laser Engraving Machine 3040cm Laser Cutter Engraver Tool. 80W Laser Engraver 1m1m Working Area Laser Engrave Machine With TTL/ PWM DIY. 1M1M Working Area Laser Engrave Machine with TTL/ PWM Laser cutting machine. Upgraed CNC Router Machine 8080 Full Kit 3 Axis Engraving Cutting Machine DIY. Laser Cutting Machine GRBL 32Bit PWM Control Laser Engraving Machine (No laser). 40/80W High Accuracy Laser Engraving Cutting Machine DIY Printer Milling Machine. 6565cm Work Area Laser Cutting Engraving Machine Frame DIY Cutter Printer Tools. Laser Engraver 80W App Control CNC Router and Laser 2 in 1 Machine Cutting Tool. Added chain, no need to worry about cable when engraving. The maximum engraving an area to achieve 100 100CM. Aluminum material, acrylic produced. It can adjust laser power by software. 100100 ultra large engraving area, gantry shape design, no engraving height limitation. Three stepper motor drive providing faster moving speed. Engraving power and long-term available. Can print any pictures easily. The software can directly import pictures, enter text, support simple dxf file. This machine is a full set of parts, required installed on their own, giving the purchaser to install software and tutorials. Sysytem Support;Win XP/7/8/10. Engrave Mode:Photo, Word, Scan, outline, Pixel Laser Engraving. Supported Formats:jpg, bmp, svg, G-code. Material:Stainless Steel and Acrylic. Working Voltage:DC 12V. Working Current:DC 5A. Laser Power:15W/30W/40W(Fixed Focus). Control Software System :CNC software. Engraving Area:100x100cm / 39.37 x 39.37inch (maximum). Optical Power Output:5.5w. Laser Tube: LD FAC C-Lens. Beam Shape:Dot (Fixed Focus). Operating Voltage:DC 12v. Module Size:40mm X 40mm X 152mm. Cooling Mode:12v 10000 Rpm 40mm Cooling Fan. Focus:0.080.08. Input Interface:xh2.54-3pin (+, -, Pwm/ttl). TTL Output Power:> 1k Hz Output Power = Continuous Power X 40%. Laser Class:class IV. Safe Temperature Range:15? Life Time:1500020000 Hours. Laser Cable Length:80cm. Heatsink Material:Aluminum + PCTG. Anti-static: Up To 25kv Static Electricity Can Be Eliminated. Shell: Frosted Material, Good Heat Dissipation. Magnetic Blower Protective Shell:constitutes An Air Duct, Has Good Heat Dissipation, And Protects Eyes And Lasers. Optical power output:9.5W11W. Beam shape:Dot (Fixed Focus). Operating voltage:DC 12V. Input interface:XH2.54-3Pin (+, -, PWM/TTL). TTL output power:> 1K HZ output power = continuous power x 40%. Laser class:Class IV. Safe temperature range:15? Life time:1500020000 hours. Up to 25kV static. Electricity can be eliminated. Shell: Frosted material, good heat dissipation. Magnetic blower protective shell:Constitutes an air duct, has good heat dissipation, and protects eyes and lasers. Engraving Parameters Of Different Materials (For Reference Only). Plywood 2mm cut : 500mm/min, S1000, 1 Pass. Plywood 3mm cut : 450mm/min, S1000, 1 Pass. Plywood 4mm cut : 400mm/min, S1000, 1 Pass. Plywood 5mm cut : 240mm/min, S1000, 1 Pass. MDF board 3mm cut : 180mm/min, S1000, 1 Pass. MDF board 3mm cut : 120mm/min, S1000, 2 Pass. Black acrylic plate 3mm : 120mm/min, S1000, 1Pass. Black acrylic plate 5mm : 120mm/min, S1000, 2Pass. Plywood 2mm cut : 300mm/min, S1000, 1 Pass. Plywood 3mm cut : 250mm/min, S1000, 1 Pass. Plywood 4mm cut : 200mm/min, S1000, 1 Pass. Plywood 5mm cut : 100mm/min, S1000, 1 Pass. Plywood 5mm cut : 200mm/min, S1000, 2 Pass. MDF board 3mm cut : 100mm/min, S1000, 1 Pass. MDF board 3mm cut : 320mm/min, S1000, 2 Pass. Black acrylic plate 3mm : 100mm/min, S1000, 1Pass. Black acrylic plate 5mm : 100mm/min, S1000, 3Pass. Two-axis board connection diagram. Three-axis board connection diagram. Control Board–GRBL 2 Axis. UPgrade:Control Board–GRBL 3 Axis:(Work with Z axis kits). Sometimes take longer in some remote city. These items are 100% Brand New. We do our best to serve our customers the best that we can. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem. Monday-Friday Beijing Time 8:30A. We will reply to you within 24 hours. As soon as possible.

15. 11
2022

Spindle motor driver module for Kitamura MyCenter 2 milling machine

Written by: admin - Posted in: spindle - Tags: , , , , , , ,
Spindle motor driver module for Kitamura MyCenter 2 milling machine


Spindle motor driver module for Kitamura MyCenter 2 milling machine


Spindle motor driver module for Kitamura MyCenter 2 milling machine


This is the spindle motor drive unit from a Kitamura MyCenter2 milling machine, this was for a 10 horsepower spindle motor and is believed to be in good working order. It was working when the machine was taken out of service. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “starcountryarizona” and is located in this country: US. This item can be shipped to United States.

  • Brand: FANUC
  • Machine Type: Machining Center
  • Model: OM-B
14. 11
2022

X Y Z motor driver module for Kitamura MyCenter 2 milling machine

Written by: admin - Posted in: motor - Tags: , , , , , ,
X Y Z motor driver module for Kitamura MyCenter 2 milling machine


X Y Z motor driver module for Kitamura MyCenter 2 milling machine


X Y Z motor driver module for Kitamura MyCenter 2 milling machine


X Y Z motor driver module for Kitamura MyCenter 2 milling machine



Here we have the X Y Z stepper motor drive package for the Kitamura MyCenter 2 vertical milling machine. This is from a Fanuc control package for the machine. The machine control was Fanuc OM-B. The table and head positioning all worked from this one package with inputs from the Fanuc computer. We believe the problem with our machine had nothing to do with this set of drivers, the drivers showed no faults and had been working properly. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “starcountryarizona” and is located in this country: US. This item can be shipped to United States.

  • Brand: FANUC
  • Machine Type: Machining Center
  • Model: OM-B

Search this blog