It is either the DYNA or the MINITECH. In addition There is a spindle mounting bracket that was made for this unit if you want to change the spindle all-together. Machine has been upgraded to USE MACH3/4 The base unit and frame is Dyna 2400 which includes the Acme Screws. Spindle motor is from a 2200 model. This DYNA Mill has the following specs. Frame chassis is 2400 model. The Spindle Motor is from 2200. It has a new drive electronics for X, Y, Z, A axis, each axis has 6amp drivers “Made In USA”. Approximate X=5″, Y=4″ & Z =4 travel. The oil reservoir is mounted on the base (original pictured) and is a push to dispense type plunger. One shot and the system lube all axis ways. The steppers are new and they are Chinese and seems to work well. All X, Y, and Z movement error is 0.05mm. The spindle responds to program ON/OFF gcode. Let us talk about something you may be concerned about as I would be. The table is tested for linearity and it seems to keep excellent Z axis distance from the table at almost every point on the table except some dings here and there. Such accuracy should give user a very good result where an equal depth channel needs to be milled in to work piece. There is one drill mark (point) on the table as seen on the picture. I used this machine manly for PCB cutting at slow FR. The unit was repainted when I was in NJ and the job is not that great. The spindle retains the original specification as shown in the picture. The spindle RPM is maxed out at 10K and uses a spindle motor from 2200. There is hardly anything in this unit to do except plug and run. The CNC machine has 4th axis fully functional. The 4th axis can drive a stepper motor as much as 6.0Amp max. The unit has an isolation transformer which is wired so it can be turned off from the rocker switch. The unit does not needs cleaning but spindle might require repacking. Remember DYNA says the spindles does not need any service. All Axis limit switch work as they should. All switches are original. All other buyers around the US can use any trucking system of their choosing. I will have the unit ready for trucking in a wooden like box container and then wrapped with plastic to protect it from rain while in transition. See the box picture. The item “Dyna 2400/2200 CNC Mill 4 axis MACH3/4 ready Made In USA 1/16 micro-step more” is in sale since Thursday, January 25, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “empire9876″ and is located in Charlotte, North Carolina. This item can be shipped to United States.

Lot of 7 Milling Cutters, SECO Sandvik Ingersoll and more, some new + INSERTS This is a fantastic lot of rotary indexable end and face mills, with a couple indexable ball mills as well. Includes two brand new ones, and all are good, no working damage. Shanks of 1 and over. I’m listing as New Other because there are many new items in the lot. But the rest are used. Includes: Ingersoll Form Master Button End Mill, 1.5in Dia. #3011044 NEVER USED EDP: 3011044 Part: 15B1F1581R01 Series: 15B1F. 1.25 shank Indexable End Mill – for 4 RDHX 12T3-MO NEVER USED Uses 4 Inserts, RD.. Mounted on a Ingersoll WB125 MOD 165K-40 Shank, 1.25, plus a few used inserts. Perfect insert seats, very good used tool, some rubbing evident on shank, but working end looks perfect. Indexable Ball End Mills, one with a decent insert, 1 shanks. 75″ Cutting Diameters, 7.4″ OAL and 6 OAL. Check my other items for sale, I have more lots on the way. Getting rid of my inventory. The item “Lot of 7 Milling Cutters, SECO Sandvik Ingersoll and more, some new + INSERTS” is in sale since Thursday, January 25, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “biomicronian” and is located in Salt Lake City, Utah. This item can be shipped to United States.

• Brand: Unbranded/Generic
• MPN: Does Not Apply

The CNC conversion was done with a CNC Fusion ballscrew kit. The X axis is a 425oz in, Y is 280 oz in, and Z is 420oz in driven by DM542A digital stepper motor drivers. There is a 4th axis driver installed and wired for use with a 4th axis (not included). The spindle is a 500w brushless motor from the LittleMachineShop mini mill/Sieg SX2 and has a pneumatic quick change tool with C3/4 Tormach collet for use with TTS collets or 3/4 shank tools. This is by far the best way to use a CNC machine in my opinion. No messing around with wrenches changing R8 collets. Just push a button and the TTS collet drops out so you can swap it out easily and tool free. Includes rolling enclosure that is set up for flooded coolant. There are two loc line nozzles attached to a magnetic base connected to a submersible pump in a reservoir below the machine. The coolant drains out through a screen back into the reservoir with a secondary catch basin for contaminants/chips. The control box was custom made with an ethernet smoothstepper, 4 DM542A digital stepper motor drivers, a MeanWell 1000W 48V PSU, CNC4PC C6 Spindle control board, and some voltage regulators. There is also a fan installed. There is an e-stop switch on the front as well as a button to release the collet (there’s another button on the spindle head), and a spindle control switch. The spindle can be controlled manually with a knob on the control box or switched to be controlled with the computer through mach. The ethernet smoothstepper is one of the best aspects of this as it means this machine can be used with any computer and there is no need to use one with a parallel port and it supports Mach4. This includes a Windows 7 computer w mach3/cad/cam all ready to go and configured to get using it immediately. Also included is a 1/2″ drill chuck on TTS shank, a 4″ vise with rotating base, USB pendant for jogging etc, clamp kit, and a parallels set. There is also a 38000 rpm pencil grinder attachment on the left side of the spindle for high speed engraving etc. I also installed a tachometer on the face of the spindle to see the RPM of the spindle but never finished it. I can finish it at the buyers request if needed. Feel free to ask any questions you may have. The item “Sieg X2 CNC Fusion Mini Mill with Brushless Spindle, Quick Change Tooling + MORE” is in sale since Saturday, July 15, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “laeauctions” and is located in Los Angeles, California. This item can’t be shipped, the buyer must pick up the item.

Used Sherline 5400 Mill with tooling. The item “Sherline 5400 Mini Mill with rotary table and more accessories and tooling” is in sale since Tuesday, April 11, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “1366ps4″ and is located in Rome, Georgia. This item can be shipped to United States.

If No please Call or text us at. Sherline CNC Mini Milling Machine. Model RS-5A with Power supply Controller Power cables and Mill accessories. Software is NOT INCLUDED. This unit comes from a local school system that no longer offers this class. This is in very good cosmetic and working condition, with no visual defects noted. Power supply and controller both light up, Mill operates nicely, as does the variable speed. No further testing has been done. You are getting the Sherline CNC Mill, Power supply, Controller, all cables and the other accessories that are shown. NO Software or additional collets. Auctiva Free Image Hosting. The item “Sherline CNC Mini Milling MachineMill RS-5APower SupplyControllerand More” is in sale since Tuesday, November 15, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “old_school_warehouse” and is located in Monroeville, Ohio. This item can be shipped to United States.

This milling system is from the estate of my father (a great man of many talents and interests). He had bought it shortly before his health failed. He’d spared no expense — purchasing not just the deluxe package but many other great milling accessories that are included here. He was able to use the machine very little and in fact many of the accessories were clearly never used at all. Here is what’s included. Sherline Mill 5400 with variable speed motor mounted on nice platform with rubber feet. Boring Head with boring tool. Fly cutter head with cutting tool. Milling vise with hold downs. Table hold down kit. Rotating vise base assembly. 6 piece end mill set 4 flute. 6 piece end mill set 2 flute. Assorted tool collets and draw bars. Sherline Catalog and 252 pg Machinist ready reference manual. The item “Sherline Deluxe 5400A Mill package plus many more additional expensive add-ons” is in sale since Monday, December 14, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “1sjk” and is located in Mesa, Arizona. This item can be shipped to United States.

• Brand: Sherline
• Country/Region of Manufacture: United States
• Model: 5400

Winner will get all items shown in photo. Please enlarge photo and feel free to ask any questions. ALL THE TOLD ME IS THERE IS ALOT OF CARBIDE END MILLS. I WAS GOING TO LIST THEM IN SMALL LOTS BUT I JUST DON’T HAVE THE PATIENCE. MY LOSS YOUR GAIN. NO RESERVE AND GOOD LUCK. The item “BIGGEST Machinist Tool Lot EVER! Made in U. S. A Carbide End Mill Bit + MORE” is in sale since Friday, November 20, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “airjordan2006″ and is located in Northridge, California. This item can be shipped to United States.

THERES NOT MUCH TO SAY alL looks to be in excellent condition ,, GET EVERYTHING SEEN , PLEASE ASK ALL QUESTIONS NEEDED,,, THANK YOU FOR LOOKING. The item “LARGE LOT BIG END MILLS BITS MILLING LATHE AND MORE” is in sale since Thursday, November 05, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “ohiokan” and is located in Manhattan, Kansas. This item can be shipped to United States.

• Brand: NIAGRA
• Model: END MILL

Get vendio gallery – now free! 44 end mill box lot, greenfield, sossner, melin, morse, cleveland, more, nr! More or less. Many are unused, some have some wear, all the ones i looked at have lots of life left in them. You get mostly american brands, such as morse, cleveland, sossner, and so on, but there are a few imports as well. They will be packed tightly in a box, but not individually wrapped. Get a deal on a wonderful selection of end mills! Click images to enlarge. Will combine with other items when possible. Vendio images: more than just. Templates with vendio sales manager. Free counters used in millions of listings – vendio!The item “44 END MILL BOX LOT, Greenfield, Sossner, Melin, Morse, Cleveland, More, NR” is in sale since Wednesday, January 28, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Cutting Tools & Consumables\End Mills”. The seller is “the_toolshed” and is located in Belmont, Massachusetts. This item can be shipped to United States.

Many bridgeport parts 4 handles bearing spring winding unit. Some parts are nos.The item “Bridgeport Milling Machine Parts bearing and more” is in sale since Monday, January 26, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “cjpluto” and is located in Newark, New York. This item can be shipped to United States.

• Brand: Bridgeport and others