Here are (2) Servo power feed units. The 100 model works flawlessly, the 150 model does not have the switch to test it. There are several items for the units (gears and old components). I rebuilt the 150 model two years back, it was never used since as I never got a switch to test it. The jog button broke on the 150 and I never tried to source another. The one unit was on the Y axis, the other was on the X axis from a mill I used to have. The brackets are included for X and Y mounting. All my machines are CNC or CNC/manual so I do not need these anymore. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tom206″ and is located in this country: US. This item can be shipped to United States.

• Model: 150

HURCO VM-1 CNC VMC 3 axis, UltiMax CNC, Under power for inspection. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “keitsmit223″ and is located in this country: US. This item can be shipped to United States.

• Machine Type: Machining Center
• Control: CNC
• Model: VM-1
• Spindle Horsepower: 15 hp
• Power Source: Electric
• Table Length: 30 in – 34.9 in
• Spindle Taper: CAT 40
• Brand: Hurco
• Function: Drilling, Milling
• X-Axis Travel Bed: 26 in – 30 in
• Model Year: 2006
• Max Spindle Speed (RPM): 7501 – 10000
• Voltage: 230 V
• Y-Axis Travel Bed: 10 in – 15 in

220 3 phase machine good bearings no backlash, with VFD YOU CANUSE SINGLE PHASE VOLTAGE AND MACHINE SPEED CAN BE USED LIKE A CAIR SPEED MACHINE, LOW HOURS IN VERY GOOD CONDITION THIS IS ABOUT 30 PERCENT OF THE PRICE OF A NEW MACHINE. Take a look at the flaking on the knee they realy took good care of this mill one owner machine came out of a home shop. PLEASE MESSAGE I CAN SEND A LIST OF NEW PARTS TABLE SCREWS INSERTS BEARINGS. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “cncpa53″ and is located in this country: US. This item can be shipped to United States.

• Model: Bridgeport 9×42
• Spindle Horsepower: 9 hp
• Machine Type: Mill Drill
• Function: Drilling
• Brand: msc

Bridgeport Vari Speed Milling Machine 1 1/2HP 36 Table W/ Power Feed-Vise+++. Comes with an angle plate, Bridgeport vise, end mills, collets, collet rack, and drill Chuck. We can install a digital readout if needed for extra charge. Has original Bridgeport powerfeed. Head has refurbished with new bearings, belts, and bushings. Check out my other listings as well. Thank you for looking. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mattpokerpro7750″ and is located in this country: US. This item can be shipped to United States.

• Brand: Bridgeport
• Spindle Horsepower: 2 hp
• Function: Milling
• Machine Type: Milling Machine
• Model: Bridgeport Vari Speed Milling Machine

The power table feed kit is for bridgeport and similar knee type milling machines. These will fit almost any vertical knee type mill out there with the 5/8 shaft end, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… X-AXIS POWER FEED- Made of aluminum material. Rotate Speed: 200 RPM, Max Torque: 450in-lb. Your Best Online Business Partner. Power Feed X-Axis Torque 450 in-lb Power Feed Milling Machine 200RPM 110V. Made of aluminum material. Power feed is equipped with safety feature to protect transmission gear and electronic components as to meet the requirements of ergonomics. QUIET & RAPID OPERATION. Noiseless direction changes, better surface smoothness and power table feed won’t vibrate or strain in low speed. DURABLE & LONG LASTING. Safe design helps to protect transmission gear and electronic components; two gears of this power table feed will not mesh and wear at the same spot, maximizing durability and longevity. Weight:12.83 lb. Model: 450 in-lb X-Axis. Rotate speed: 0-200 RPM. Max torque: 450 in-lb. Max feed rate: 650mm/min. Max return speed: 850mm/min. Dimension: 12.60 X 11.22X 7.87 IN. Package weight: 12.83lb. 1 x Power Feed For Milling Machine 8 x Adjustable Pad 2 x Tiavel Stop Assembly 1 x Adapter; 1 x Bevel Gear 1 x Dial Nut ;1 x Locking Nut 1 x Product Manual. 12.60 x 11.22 x 7.87 IN. We are not responsible for wrong or undeliverable address. We fully understand how critical it is to keep communications as smooth and quick as possible. Many issues could be resolved by themselves thru well communications. We are trying every effort to answer your questions and inquiries in a timely manner.. Please note that our office is closed during weekend and holidays. Please keep in mind that by no means we would ignore your emails and not respond on purpose. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “topower-biproducts” and is located in this country: US. This item can be shipped to United States.

• Machine Type: Mini Milling Machine
• Max feed rate: 650mm/min
• Brand: topower-biproducts
• Control: Manual
• Max return speed: 850mm/min
• Style: X-Axis/450LBS
• Voltage: 110V, 50/60Hz
• Material: Iron, PVC
• Power Source: Electric
• MPN: 164137
• Custom Bundle: No
• Rotate speed: 0-200 RPM
• Modified Item: No
• Max torque: 450 in-lb
• Color: White
• Dimension: 12.60 x 11.22 x 7.87 IN
• Weight: 12.83 lb
• Country/Region of Manufacture: China

ALB-310SX X-Axis Power Feed Milling Drill Machine 200RPM 450in-lb. Product parameters – Name: electronic power feed, electronic feeders – Model: ALB-310SX (Horizontal) – Main motor power: 95w – Speed range: 0-200 – Maximum speed: 200RPM – Maximum torque: 450in-lb – Power Requirements: AC110V , 50 Hz – Applicable models: vertical turret milling machines, drilling and milling machine, other machinery. Package Content: 1 x ALB-310SX X-Axis Power feed Milling drill Machine 200RPM 450in-lb (as picture). Usually it cost about 35USD-50USD. Thanks for your understanding. If you receive defective item, please kindly notify us within 14 days. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “topcyberday” and is located in this country: US. This item can be shipped to United States.

• Model: ALB-310SX
• Machine Type: Vertical Milling Machine
• Main motor power: 95w
• Function: Drilling
• Speed range: 0-200
• Maximum speed: 200RPM
• Power Requirements: AC110V , 50 Hz
• Brand: Unbranded/Generic
• Voltage: 110 V

Maximum Feed Rate Per Minute (Inch). Maximum Feed Rate Per Minute (Decimal Inch). Minimum Feed Rate Per Minute (Inch). Maximum Peak Torque Per Pound (Inch). Maximum Continuous Torque Per Pound (Inch). Traversing Speed Per Minute (Inch). This item is new, however, The original packaging is imperfect. Please review photos, comes as shown. 155 Center Ct, Venice, FL 34285. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “industryrecycles” and is located in this country: US. This item can be shipped to United States, Canada, Mexico, Bermuda.

• Location: VM11219pallet225
• MPN: AL-500PZ
• Function: Milling
• Model Year: Unknown
• MSRP: $520
• Machine Type: Milling Machine
• Country/Region of Manufacture: Taiwan
• Model: AL-500PZ
• Brand: WORKHORSE

This is a USED Jet JTM-4VS vertical milling machine and it is LOADED! The standard stock number is 690180 and serial number is 9031495, it has a 9″x49″ table with 34″ of longitudinal travel and 12″ of cross travel, with a one-shot lube system. Then the table capacity is 660 pounds and it has 3 T-Slots that are 5/8″ on 2-1/2″ centers. It has a R-8 spindle and the quill travel is 5 with a 60-4200 RPM variable speed head. Machine has 3 power down feeds on that head of. 006, then is will tilt 90° right to left and 45° front to back. Motor is 3 H. 230/460 volt and is 3-phase and has a multiple electric 115-Volt outlet fixture on the back to plug in the various accessories. This thing is LOADED and in very good condition! INCLUDES: MLV-6 JET 6″ Swivel Vise, 0-1/2″ drill chuck, work light, safety shield on magnetic base, Kool Mist air type coolant unit with a flexible arm on a magnetic base, Jet Brand power table feeds on cross feed & table feed, Servo Brand power table feed on the knee and lastly it has a 2-Axis Newall Digital Readout System. Machine weights around 2700 lbs. E b a y Stores And check out our website with over 300,000 items in stock! It is fully interactive and will show you current pricing and stock availability on thousands of items! Or register today & open an account to place orders, print statements, expedite orders and more! Also listed will be our toll free telephone and fax numbers for your convenience. Get your copy of our 450 page T&S Catalog, with listings of popular items from all the companies we represent. Direct Links to all our vendors which include some of the top names in the industry; Kennedy, OSG, Guhring, Clausing, Jet, Precision Twist-Dormer, Wilton, Norton, Starrett, Allied, Mitutoyo, YG-1 Keo, Brown & Sharpe and Jacobs, just to name a few! WE SPECIALIZE IN CUTTING TOOLS! Hundreds of decimal reamers, including over and under size metric reamers from 1mm to 20mm….. Hundreds of special taps from #000 to 4, endmills, toolholders, abrasives, fasteners, machinery and much more. Give us a call! This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tstoolsupplycompany” and is located in this country: US. This item can be shipped to United States.

• Model: JTM-4VS
• Spindle Horsepower: 3 H.P.
• Country/Region of Manufacture: Taiwan
• Machine Type: Power Feed Milling Machine
• Table Length: 49\
• Max Spindle Speed (RPM): 60-4200 RPM’s
• Model Year: Serial #9031495
• Power Source: 3-Phase, Electric
• Spindle Taper: R-8 Spindle
• Function: Drilling, Milling
• Brand: JET
• Table Width: 9\
• Control: Manual
• Voltage: 230/460-Volt

USED BRIDGEPORT MILLING MACHINE SERIES 1, 2HP, W/ RISER BLOCK, 3 POWER FEEDS, 1 KURT VISE, NEW DIGITAL READOUT. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “elitetooling” and is located in this country: US. This item can be shipped to United States.

• Spindle Horsepower: 2 hp
• Brand: Bridgeport
• Function: Milling

Bridgeport Milling Machine Original Power Feed With Power Unit & Rod Parts Unit. I just took it off a Vari speed Bridgeport, we are just going to install a new one. It might be an easy fix. Check out my other listings as well. Thank you for looking. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mattpokerpro7750″ and is located in this country: US. This item can be shipped to United States.

• Brand: Bridgeport