9 x 49 MSC Vertical Milling Machine, Model 951682, S/N 771559. To View under Power Follow the link Below. 9 x 48 Table. Spindle Speeds 60 4200 RPM. Hp 2 220 Volt 3 Phase. Machine Weight 2000 LBS. Variable Speed Milling Head. Good Condition- Head is quiet backlash Good. Inspect under Power in Our Lebanon NJ Warehouse. The item “9 x 49 MSC Vertical Milling Machine, Vari Speed, Power Feed, Made in Taiwan” is in sale since Friday, July 19, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “michaelfinemachineryco” and is located in Lebanon, New Jersey. This item can be shipped to United States.

• Country/Region of Manufacture: Taiwan
• Spindle Horsepower: 2
• Machine Type: Milling Machine
• Table Length: 49
• Max Spindle Speed (RPM): 4200
• Model Year: 1985
• Power Source: Electric
• X-Axis Travel Bed: 30
• Y-Axis Travel Bed: 12
• Z-Axis Travel Bed: 5
• Spindle Taper: r-8
• Brand: MSC
• Table Width: 9
• Control: Manual
• Voltage: 220 V

Power Pauer & Co Indexing Head Milling Machine Tool. The item “Power Pauer & Co Indexing Head Milling Machine Tool” is in sale since Thursday, August 22, 2019. This item is in the category “Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “a1industrialclearances” and is located in Melbourne , Victoria. This item can be shipped worldwide.

• Machine Type: Milling Machine Indexing Head
• MPN: Does Not Apply
• Function: Milling
• Brand: Power Pauer And Co
• Control: Manual
• UPC: Does not apply

Digital readouts & Machinery. Voltage: 110V, or 220V 50/60Hz. Rotate speed: 0-200 RPM. Max torque: 450 in-lb. Max feed rate: 650mm/min. Max return speed: 850mm/min. Dimension: 8 x 4.5 x 13 inches. Package size: 11.8 x 8.7 x 13.8 inches. Gross weight: 16.5 lbs. Brand new power feed. X traverse (left-right travel). These are powered by a Standard 220v or 110V Plug So No Wiring is Required! This set includes everything you should need to install this power feed, including the power feed unit, table mounting bracket, drive gear, shims, safety stop, and hardware. 1 x Power Feed For Milling Machine. 8 x Adjustable Pad. 2 x Tiavel Stop Assembly. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. Brand new Power feed ALB-310X. Variable speeds – Torque 450 in-lb. Available in 220V or 110V (X). Small volume and easy installation. Excellent speed control in the entire range. Variable speeds â Torque 450 in-lb. Add to Favourites. The item “Power feed for Horizontal milling machine ALB-310sx 110V / 220V free shipping” is in sale since Monday, August 20, 2018. This item is in the category “Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “digitechdirect” and is located in Endeavour Hills . This item can be shipped worldwide.

• Modified Item: No
• Custom Bundle: No
• Non-Domestic Product: No

Digital readouts & Machinery. Voltage: 110V, or 220V 50/60Hz. Rotate speed: 0-200 RPM. Max torque: 450 in-lb. Max feed rate: 650mm/min. Normally speed & rapid switch. Max return speed: 850mm/min. Dimension: 8 x 4.5 x 13 inches. Package size: 11.8 x 8.7 x 13.8 inches. Gross weight: 16.5 lbs. Brand new power feed. X traverse (left-right travel). Brand New AL-310S X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, Firstetc. The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot; this not only increases durability and longevity but even reduces noise over time. 1 x Power Feed For Milling Machine. 8 x Adjustable Pad. 2 x Tiavel Stop Assembly. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. Brand new Power feed AL-310SX. Variable speeds Torque 450 in-lb. Available in 220V or 110V (X Y Z). Small volume and easy installation. Excellent speed control in the entire range. Add to Favourites. The item “Power feed milling machine AL-310S 200RPM 450in-lb110V / 220V free shipping” is in sale since Sunday, September 11, 2016. This item is in the category “Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “digitechdirect” and is located in Endeavour Hills . This item can be shipped worldwide.

• Modified Item: No
• Custom Bundle: No
• Non-Domestic Product: No

SUPER NICE KNEE LOW MILAGE NEWER STYLE 1 HP 3 PHASE 220 OR 440 SET ON 220 IF YOU NEED SINGLE PHASE WE HAVE VFD TO CONVERT TO SINGLE PHASE VOLTAGE WE CAN INCLUDE A POWER FEED LIST PRICE 596 WE CAN DO FOR 300. (THIS ONE IS A KEEPER). IF YOU NEED EXTRA TOOLING WE CAN DO A GOOD DISCOUNT IT DOES COME WITH COLLET SET DRILL CHUCK IF YOUR JUST STARTING OUT AND NEED SOME ENDMILLS PLEASE ASK WE CAN SET YOU UP WITH CUTTING TOOLS NO CHARGE. NO HOLES IN THE 42 TABLE TIGHT MACHINE WAS TUNED UP TURN KEY MACHINE. Take a good look at the knee photo that tells it all low low milage low hours on this machine was bought new with the step pully head later model thats all origiginal flaking you dont see them like this to ofen this is a keeper if we repaint this an polish it up we can put on our web site for 4900. The item “WEEKLY SPECIAL BRIDGEPORT MILLING MACHINE DRO POWER FEED CHROME KNEE” is in sale since Thursday, September 5, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jerbou-89″ and is located in Bristol, Connecticut. This item can be shipped to United States.

• Model: J HEAD
• MPN: Does Not Apply
• Brand: BRIDGEPORT

Now for sale and available for your inspection at our warehouse in beautiful downtown Miamisburg, Ohio is this. Vertical Ram/Knee Type Milling Machine complete with. A Acu-Rite MillMate Digital ReadOut (DRO) and Servo Power Feed on theTable, S/N 190060. Manufactured New in 1980. The Head on this machine sounds very good, but the ways are worn, but not scored, and it has about. 090″ backlash in “X” & “Y axes. Everything works as it should on this Milling Machine. It is a decent (but not excellent) milling machine probably capable of holding +/. 002 by a skilled machinist. Specifications for this machine are as follows. Bridgeport Series 1 w/ Acu-Rite MillMate Digital Readout (DRO) and Servo Power Feed on the Table. Table Size: 9″ x 42″. Quill Travel: 5 (Z-Axis). Variable Speed: 60-4,200 rpm. Qull Feed per Spindle Revolution. Quill Diameter: 3 3/8. Table Load: 880 lbs. Adjustable automatic feed disengagement for quill feed in both directions. Reversible switch for clockwise or counterclockwise operation. Acu-Rite MillMate 2-Axis Digital Read Out (DRO). Servo Power Table Feed. One Shot Lubrication System. Overall Dimensions: 58″ L x 66″ W x 88 H. Overall Weight: Approximately 2,350 lbs. We will load, free of charge. First of all, our descriptions are as accurate as we can possibly make them, and we’ve been describing equipment for longer than we care to admit. Every item we sell, unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse 515 Kercher St. Best Ways Brokerage Inc. This Milling Machine will weigh approximately 2,350# and occupy 5′ of bed space. We recommend it be tarped. The item “Bridgeport Series I Milling Machine, 9X42, Two (2) Axes DRO, Servo Power Feed” is in sale since Sunday, April 21, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “u$ave2″ and is located in Miamisburg, Ohio. This item can be shipped to United States.

• Model: Series I, BR-12
• Modified Item: No
• Country/Region of Manufacture: United States
• Spindle Horsepower: 3/2
• Custom Bundle: No
• Table Length: 40” – 59.9”
• Model Year: 1980
• Type: Vertical, Knee Type
• Serial Number: 190060
• Control Type: Acu-Rite MillMate 2 Axis DRO
• Non-Domestic Product: No
• Highest Spindle Speed (RPM): 4001 – 4500
• Make: Bridgeport
• X-Axis Travel Bed: 31” – 35”
• Y-Axis Travel Bed: 10” – 15”
• Z-Axis Travel Bed: 16” – 20”
• Table Width: Less than 10”

We have 2 available! Model #30(BS) / 31N2F (BS) /25. With Power Table Feed. Great for garage, just plug it in! All information deemed accurate but may vary from model to model. For any questions you may have.. Fast Application, its all filled in for you.. Online leasing applications get. Please Note: Not all machines may qualify for Leasing. We accept all Major Credit Cards, Bank Wires, Company and Personal Checks. We always get better rates. Just include the zip code when inquiring and if you have a loading dock or ground level with forklift. CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing. Unless otherwise specified, prices quoted are F. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user’s responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. The item “ACRA 110V Milling Machine with power table feed 2 available Beautiful” is in sale since Sunday, July 21, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “palmtreespecialties” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Machine Type: Milling Machine
• Table Length: 25 in – 29.9 in
• Function: Drilling
• Brand: ACRA
• Table Width: Less than 10 in

Used Rotex RM1 5×20 horizontal milling machine. Mill runs fine, power feed and kick outs work fine as well. Table and ways are decent. Backlash is 1/4 turn on the x and about 1/2 turn on the y. Currently has a 1hp 230v 3ph motor. Paint is a old and worn. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Please check out my other auctions. Call three one four seven five zero one four zero three with questions. Items not picked up within 60 days will be resold. The item “Rotex RM-1 Horizontal Milling Machine Power Feed Benchtop 5×20 1hp 3ph 240v” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ddmo1″ and is located in Millstadt, Illinois. This item can be shipped to United States.

DOALL VARIABLE SPEED MILL W/ POWER FEED – 54″ X 9″ TABLE. This is a fixed listing for a DoALL Milling Machine. Specifications: Make: DoALL Type: Vertical Mill Table Size: 54″ x 9″ Power Feed Installed Variable Speed: 60-4200 RPM. The mill is exactly as pictured and has been tested to be in operational condition. We will load your truck or carrier free of charge at our loading dock. International buyers are always welcomed. Get Images that Make Supersized Seem Small. Tailor your auctions with Auctiva’s. Track Page Views With. Auctiva’s FREE Counter. The item “DOALL VARIABLE SPEED MILL With POWER FEED 54 X 9 TABLE” is in sale since Monday, October 30, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dockguys” and is located in Rochester, New York. This item can be shipped worldwide.

• Make: DOALL
• Type: Manual, Vertical
• Highest Spindle Speed (RPM): 4001 – 4500
• Table Length: 40” – 59.9”
• Table Width: Less than 10”