Complete running machine with good bearings all pullys are good comes with quill handle knee handle r8 collets vise head was tuned up all working machine. Turnkey plug and play. (CHECK CARD OR WIRE NO ONLINE PAYMENTS). THIS IS WAY BELOW MARKET VALUE!!!!!!!!!!! WE DO HAVE A 4TH AXIS A HAAS THAT MIGHT WORK ON THIS MACHINE WE CAN DISCOUNT IF INTERESTED. The item “Bridgeport Milling Machine vari speed power feed 9x 42″ is in sale since Monday, March 11, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “jerbou-89″ and is located in Bristol, Connecticut. This item can be shipped to United States.

• MPN: Does Not Apply
• Brand: bridgeport
• Model: varispeed

BRIDGEPORT MILL VARI SPEED CHROME WAYS DRO 3 POWER FEEDS 2 HP POWER DRAWBAR PLEASE ASK FOR JIM 7146121480 TNT INDUSTRIAL. Under no circumstances shall we or any affiliate of ours have any liability whatsoever for the loss of use of for any indirect or consequential damages. The item “NICE BRIDGEPORT MILL VARI SPEED CHROME WAYS DRO 3 POWER FEEDS 2 HP POWER DRAWBAR” is in sale since Tuesday, March 12, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “tnt_industrial” and is located in Long Beach, California. This item can be shipped to United States.

• Model: MV-350
• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• MPN: Does Not Apply
• Brand: BRIDGEPORT
• Non-Domestic Product: No

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices – Fast & Easy. Manual Lathes, Mills, Drills, Saws. Planers & Planer Mills. Ovens, Furnaces & Environmental. 14″ Swg 21.26″ cc Bridgeport-Romi POWER PATH 15 CNC LATHE, DX-32 Control, 8Chk. 14″ Swing 21.26″ Centers Bridgeport-Romi POWER PATH 15 CNC LATHE, DX-32 Control, 8Chk. Ref # : 158313 iammdna XCNCTC. BRIDGEPORT POWERPATH 15 CNC TURNING CENTER. GENERAL SPECIFICATIONS AS PER BROCHURE. SWING OVER “Z” COVER: 17.32. CUTTING DIAMETER: 11.02. CUTTING LENGTH: 21.26. SPINDLE HOLE DIAMETER: 2.6. SPINDLE SPEEDS (ON PROGRAM CHANGE). RANGE 1: 15 – 1,500 RPM. RANGE 2: 45 – 4,500 RPM. # OF TOOLS: 12. NEXT TOOL: 0.8 SEC. 180 DEGREES: 1.5 SEC. BODY TRAVEL: 12.4. QUILL TRAVEL: 5.12. QUILL DIAMETER: 3.15. QUILL TAPER HOLE: 4MT. : 104.6″ X 59.3″ X 66.5. BRIDGEPORT DX-32 CNC CONTROL. 8 3-JAW HYDRAULIC CHUCK. ALL AVAILABLE TOOLHOLDERS & MANUALS. The item “14 Swg 21.26 cc Bridgeport-Romi POWER PATH 15 CNC LATHE, DX-32 Control, 8Chk” is in sale since Sunday, March 31, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “imachine” and is located in Harrison, New Jersey. This item can be shipped to United States.

• Brand: Bridgeport-Romi
• Model: POWER PATH 15
• MPN: POWER PATH 15

ALSGS AL-310S 110V / 220V milling machine power feed 450 in-lb power feed machinery for X , Y & Z axis. Name: milling machine, electronic feeding device. Model: AL – 310S (X, Y, Z). The main motor power: 95W. Maximum speed: 200 RPM. The maximum torque: in 450 – lb. Power requirement: AC 110V / 220V +/-20%, 50/60 hz (optional). Suitable model: vertical turret milling machine, drilling and milling machine and other machinery. After ordering please tell us. The axis(X, Y or Z axis) that you need, or we will default send X axis. There are 110V & 220V 2 types for choice, please tell us which voltage input type do you need, or we will default send 110V. The item “ALSGS AL-310S 110V / 220V milling machine power feed 450 in-lb for X axis” is in sale since Tuesday, September 4, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “machinertool0″ and is located in . This item can be shipped worldwide.

• Brand Name: Fivetecnc
• Brand: ALSGS
• MPN: Does Not Apply
• Model Number: ALSGS AL-310

BRAND NEW GENUINE ALIGN X AXIS POWER FEED. X Axis (Left/Right Table Travel) Power Feed Kit for Precision Matthews, Bridgeport, and Similar Knee Type Milling Machines. These are very high quality units, made in Taiwan, Not China. These are very high quality, very durable and built for every day use. Spend a little more and it will work for many years to come. This unit is brand new in the box (The one in the picture was just opened up for display, you will receive one that is brand new in the box). GET IT FAST, THESE ARE IN STOCK! SHIPS SAME DAY IF ORDERED BY 2PM EASTERN STANDARD TIME! These will fit almost any vertical knee type mill out there, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First, and many, many more if you mill has the same mounting pattern and a 5/8 Diameter shaft on the end. As long as it is the Bridgeport Type Machine, it should fit. (It will NOT fit mills with a different mounting pattern or different sized leadscrew like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport Type as mentioned above). These use 110V, Single Phase Power, just a standard 110/120V outlet is needed. This set includes everything you should need to install this power feed, including the power feed unit, mounting bracket, drive gear, shims, safety stop with track, and hardware. If you have any questions about this unit at all, please feel free to ask. The item “ALIGN TAIWAN X AXIS POWER FEED KNEE MILLS BRIDGEPORT & OTHER MILLING MACHINE” is in sale since Wednesday, February 27, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Model: ALIGN-500P-X
• Modified Item: No
• Country/Region of Manufacture: Taiwan
• Custom Bundle: No
• MPN: ALIGN-500P-X
• Brand: Align
• Non-Domestic Product: No

Specifications: Type: X-axis Material: Aluminium Alloy Color: Black + White Torque: 150 lbs Voltage: 220V Rotate Speed: 0-200 rpm Size: 33x20x18cm / 12.99”x7.87”x7.09” appr. Plug: US Plug / EU Plug (we will base on your country to send the corresponding adapter plug) Features Brand New and high quality. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. X-axis power feed for milling machines. 0-200 rpm rotate speed. Reversible and auto shut-off at end of cut. Excellent speed control in the entire range. Direction control knob for easy and rapid operation. Power table feed won’t vibrate or strain in low speed. Safety feature to protect transmission gear and electronic components. Introductions Speed Adjust Knob Speed can be adjust according to operator’s requirement, ranging from 0-9. Jog Switch Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Attention Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Maintenance Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). International buyers please note: a. The item “220V Power Feed X-Axis 150 Lbs Torque for Bridgeport Milling Machine 0-200 RPM” is in sale since Tuesday, December 4, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “224lala” and is located in HK. This item can be shipped worldwide.

• Country/Region of Manufacture: China
• MPN: IAC280941
• Brand: Unbranded/Generic
• Manufacturer Part Number: IAC280941

Sign up to Newsletters. X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage: 110 V, 60 Hz. Rotate speed: 0-200 rpm. Length: 33 cm (13 inch). Width: 20 cm (7.9 inch). Height: 18 cm (7 inch). Gross weight: 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A” is in sale since Wednesday, October 18, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “prettystylesoul” and is located in Ontario, California. This item can be shipped to United States, Canada, Mexico, Germany.

• Brand: VEVOR
• MPN: UGFSA00435
• Model: AS-250-150
• Country/Region of Manufacture: CHINA
• RPM: 0~200
• TORQUE: 150LBS
• Type: X-axis
• VOLTAGE: 110 V, 60 Hz
• Gross weight: 6.5 kg(14.3 lb)
• UPC: 895800908348

1.5 hp Bridgeport Vari-speed Mill with Chrome ways. Like new Power feed. The price is set deliberately high with best offer to deter someone from pulling the trigger without thinking it through. I will accept substantially less for the machine. The item “Bridgeport 1.5 hp Vari-Speed Mill Milling Machine DRO and Power feed Chrome Ways” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “clutter2college” and is located in Orient, New York. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport

X-Axis Power Feed Kit for Milling Machine. Including all the brackets and all the necessary parts. X traverse (Left-Right Travel). Torque: 150in-lb peak / 119in-lb continuous. Feed rate: 0.4 to 37.4 IPM. For 5/8 shaft with keyway. Weight about 15 LBS. Its brand new Power Feed. The item “X-Axis Power feed for Milling Machine” is in sale since Saturday, March 2, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “clarkmachinery” and is located in Ontario, California. This item can be shipped to United States, Canada, United Kingdom, Mexico, Germany, France, Australia.

• Model: Al-310
• Country/Region of Manufacture: China
• MPN: Shangdon power feed works
• Brand: ALSGS