feed Subscribe to feed
pic
19. 03
2023

AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM

Written by: admin - Posted in: as-250 - Tags: , , , , , , , , ,
AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


American Business ALL ITEMS IN STOCK IN CALIFORNIA. American STANDARD PRODUCTS QUALITY GUARANTEED. AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM. WHY SHOP WITH FACTORY-SUPPLIES? Item was as described and arrived quickly. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs. Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions. High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well. Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop. Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8 diameter shaft on the end. Such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Before installation, be sure to turn off the power supply of the milling machine. Don’t install the power feed under live condition. The product is supplied by AC110V 50/60Hz Please? Prepare the required power supply for the product. If the product is used in a region not in conformity with the national power supply, please prepare a transformer, avoid using incorrect power supply and result in damage of the product. The product is provided with overload protection, the power supply will be cut out in case of overload or stuck. It can be reset automatically by restarting the power switch. Check whether spiral gear oil is enough when carrying out maintenance. Open the carbon brush cover semiannually to check whether the carbon brush is worn. If the length is less than 7mm, it is recommended to replace the two sets of carbon brushes at the same time. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). AS-250-150 X-Axis Power Feed for Milling Machine x 1. Set of Necessary Accessories x 1. Product Manual x 1. We offer detailed product descriptions and images to give you a real advantage in finding the products you’re looking for. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “super-homeonline” and is located in this country: US. This item can be shipped to United States.

  • Rotate speed: 0-200 RPM
  • Torque: 150 lbs
  • Package size: 13\
  • Gross weight: 6.5 kg(14.3 lb)
  • Warranty: 5 Years
  • UPC: 0895800908447
  • EAN: 0895800908447
  • Brand: VEVOR
  • Function: Milling
  • Control: Manual
  • Machine Type: Milling Machine
  • Power Source: Electric
  • Max Spindle Speed (RPM): 200 RPM
  • Voltage: 110 V
  • Model: AS-250
  • MPN: ZCXUN00525
14. 03
2023

AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM

Written by: admin - Posted in: as-250 - Tags: , , , , , , , , ,
AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


American Business ALL ITEMS IN STOCK IN CALIFORNIA. American STANDARD PRODUCTS QUALITY GUARANTEED. AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM. WHY SHOP WITH BLTPRESS? Item was as described and arrived quickly. AS-250-150 X-Axis Power Feed Kit. 0-200 RPM Rotate Speed & 150 in-lb Torque & 110 V, 60 Hz. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. X-axis Power FeedPower Feed X-Axis, Voltage: 110V, 60Hz, Rotate Speed: 200 RPM, Max Torque: 150 in-lb, Dimension: 33 x 20 x 18cm / 12.99” x 7.87” x 7.09”. Easy SetupFit almost any vertical knee type milling machine with the 5/8 shaft end. Small volume and easy installation, noiseless direction changes. Durable & Long LastingSecure design helps to keep transmission gear and electronic components; two gears of this power table feed will not mesh and wear at the same spot, maximizing durability and longevity. Ergonomic DesignPower feed is equipped with security feature to keep transmission gear and electronic components as to meet the requirements of ergonomics. Quiet & Rapid OperationWith speed adjust knob, speed can be adjusted according to operator’s requirement, ranging from 0-9. Jog switch should be at “FEED” position. Fit almost any vertical knee type milling machine with the 5/8 shaft end. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). AS-250-150 X-Axis Power Feed for Milling Machine x 1. Set of Necessary Accessories x 1. English Manual x 1. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “best_factory” and is located in this country: US. This item can be shipped to United States.

  • Rotate speed: 0-200 RPM
  • Torque: 150 lbs
  • Package size: 13\
  • Gross weight: 6.5 kg(14.3 lb)
  • Warranty: Lifetime
  • UPC: 0895800908294
  • EAN: 0895800908294
  • Brand: VEVOR
  • Function: Milling
  • Control: Manual
  • Machine Type: Milling Machine
  • Power Source: Electric
  • Max Spindle Speed (RPM): 200 rpm
  • Voltage: 110 V
  • Model: AS-250
  • MPN: XUNBS00840
6. 12
2022

AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM

Written by: admin - Posted in: as-250 - Tags: , , , , , , , , ,
AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


American Business ALL ITEMS IN STOCK IN CALIFORNIA. American STANDARD PRODUCTS QUALITY GUARANTEED. AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM. WHY SHOP WITH FACTORY-SUPPLIES? Item was as described and arrived quickly. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). AS-250-150 X-Axis Power Feed for Milling Machine x 1. Set of Necessary Accessories x 1. Product Manual x 1. We offer detailed product descriptions and images to give you a real advantage in finding the products you’re looking for. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “more-vipbest” and is located in this country: US. This item can be shipped to United States.

  • Rotate speed: 0-200 RPM
  • Torque: 150 lbs
  • Package size: 13\
  • Gross weight: 6.5 kg(14.3 lb)
  • Warranty: LIFETIME
  • Type: X-axis
  • Length: 33 cm (13 inch)
  • Width: 20 cm (7.9 inch)
  • Height: 18 cm (7 inch)
  • UPC: 0895800908294
  • EAN: 0895800908294
  • Brand: VEVOR
  • Function: Milling
  • Control: Manual
  • Machine Type: Milling Machine
  • Power Source: Electric
  • Max Spindle Speed (RPM): 200 rpm
  • Voltage: 110 V
  • Model: AS-250
  • MPN: XUNBS00840
28. 07
2022

150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE

Written by: admin - Posted in: 150lbs - Tags: , , , , , , , , , ,
150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


AS-250-150 X-Axis Power Feed Kit. 0-200 RPM Rotate Speed & 150 in-lb Torque & 110 V, 60 Hz. Our feed kit features a robust shell and precise components. It works efficiently on a milling machine with a 5/8 shaft end. Besides, it is designed with buttons and knobs for simple operation. Our milling machine is an excellent choice for meeting the needs of all your milling operations. Take control of your operations and get quality equipment from a name you can trust, VEVOR. High Efficiency & Precision. Low Noise & Easy Operation. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. The feed can work automatically or manually by pressing the speed control. And the circuit breaker protects the transmission gear and electronic components. The milling machine table power feed is composed of rugged aluminum. Its finish has been polished to make its surface corrosion-resistant and wear-resistant. The power feed for the mill adopts spiral bevel gears to move freely and quietly on the mill. Most mills are loud, but our mill reduces noise, even in the garage. The mill power feed is fitted out with precise bearings that ensure smooth and stable movement. Less vibration and strain enhance the efficiency of the milling machine. The power feed for the milling machine is easy to install and operate. Only a little maintenance is required to ensure consistent long-term running. The cutter feeder is an indispensable collocation for milling machines. It is suitable for rocker milling machines, drilling and boring machine, and small grinders. Voltage: 110V, 60 Hz. Rotate Speed: 0-200 RPM. Max Torque: 150 in-lb. Item Weight: 14.3 lbs / 6.5 kg. Item Dimensions(L x W x H) : 6.5 x 4.5 x 13 in / 16.5 x 11.4 x 33 cm. 1 x Power Feed for Milling Machine. 1 x Set of Adjustable Pads. 2 x Travel Stop Assemblies. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs. Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions. High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well. Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop. Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8 diameter shaft on the end. Such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc. Power Feed Milling Machine. 450 lbs / 204 kg. 150 lbs / 68 kg. 135 lbs / 155 kg. 0 – 200 RPM. 0 – 210 RPM. 16.5 lbs / 7.5 kg. 14.3 lbs / 6.5 kg. 13.2 lbs / 6 kg. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “iloveyouallguyfoever” and is located in this country: US. This item can be shipped to United States, Canada.

  • Brand: VEVOR
  • MPN: AS-250-150NLXCZDQ
  • Model: AS-250
  • Power Source: Electric
  • Voltage: 110V, 60 Hz
  • Control: Manual
  • Function: Milling
  • Machine Type: Milling Machine
  • Max Spindle Speed (RPM): 2000 RPM
  • Type: X Traverse
  • Rotate Speed: 0-200 RPM
  • Max Torque: 150 in-lb
  • Item Weight: 14.3 lbs / 6.5 kg
  • Item Dimensions(L x W x H): 6.5 x 4.5 x 13 in / 16.5 x 11.4 x 33 cm
  • UPC: 8085443078405
27. 06
2022

150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE

Written by: admin - Posted in: 150lbs - Tags: , , , , , , , , , ,
150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


150Lbs Torque Power Feed Milling Machine X-Axis 110V USstock L. A. Ship ON SALE


AS-250-150 X-Axis Power Feed Kit. 0-200 RPM Rotate Speed & 150 in-lb Torque & 110 V, 60 Hz. Our feed kit features a robust shell and precise components. It works efficiently on a milling machine with a 5/8 shaft end. Besides, it is designed with buttons and knobs for simple operation. Our milling machine is an excellent choice for meeting the needs of all your milling operations. Take control of your operations and get quality equipment from a name you can trust, VEVOR. High Efficiency & Precision. Low Noise & Easy Operation. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. The feed can work automatically or manually by pressing the speed control. And the circuit breaker protects the transmission gear and electronic components. The milling machine table power feed is composed of rugged aluminum. Its finish has been polished to make its surface corrosion-resistant and wear-resistant. The power feed for the mill adopts spiral bevel gears to move freely and quietly on the mill. Most mills are loud, but our mill reduces noise, even in the garage. The mill power feed is fitted out with precise bearings that ensure smooth and stable movement. Less vibration and strain enhance the efficiency of the milling machine. The power feed for the milling machine is easy to install and operate. Only a little maintenance is required to ensure consistent long-term running. The cutter feeder is an indispensable collocation for milling machines. It is suitable for rocker milling machines, drilling and boring machine, and small grinders. Voltage: 110V, 60 Hz. Rotate Speed: 0-200 RPM. Max Torque: 150 in-lb. Item Weight: 14.3 lbs / 6.5 kg. Item Dimensions(L x W x H) : 6.5 x 4.5 x 13 in / 16.5 x 11.4 x 33 cm. 1 x Power Feed for Milling Machine. 1 x Set of Adjustable Pads. 2 x Travel Stop Assemblies. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs. Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions. High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well. Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop. Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8 diameter shaft on the end. Such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, etc. Power Feed Milling Machine. 450 lbs / 204 kg. 150 lbs / 68 kg. 135 lbs / 155 kg. 0 – 200 RPM. 0 – 210 RPM. 16.5 lbs / 7.5 kg. 14.3 lbs / 6.5 kg. 13.2 lbs / 6 kg. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “iloveyouallguyfoever” and is located in this country: US. This item can be shipped to United States, Canada.

  • Brand: VEVOR
  • MPN: AS-250-150NLXCZDQ
  • Model: AS-250
  • Power Source: Electric
  • Voltage: 110V, 60 Hz
  • Control: Manual
  • Function: Milling
  • Machine Type: Milling Machine
  • Max Spindle Speed (RPM): 2000 RPM
  • Type: X Traverse
  • Rotate Speed: 0-200 RPM
  • Max Torque: 150 in-lb
  • Item Weight: 14.3 lbs / 6.5 kg
  • Item Dimensions(L x W x H): 6.5 x 4.5 x 13 in / 16.5 x 11.4 x 33 cm
  • UPC: 8085443078405
2. 06
2022

AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque

Written by: admin - Posted in: as-250 - Tags: , , , , , , ,
AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


Better price, Top Quality, expert Service support. Live demo of multiple products. Owned and operated company. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. AS-250-150 X-Axis Power Feed for Milling Machine : 1. Set of Necessary Accessories : 1. All items are dispatched from our warehouse in Azusa, CA. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. We never want our customers to wait for parts, we have plenty of parts available for every product. If you have a problem with the product. We will require a picture of the damaged part for verification. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “home01-equipment” and is located in this country: US. This item can be shipped to United States.

  • Rotate speed: 0-200 RPM
  • Torque: 150 lbs
  • Package size: 13\
  • Gross weight: 6.5 kg(14.3 lb)
  • Warranty: 5 Years
  • UPC: 0895800908294
  • EAN: 0895800908294
  • Brand: VEVOR
  • Function: Milling
  • Control: Manual
  • Machine Type: Milling Machine
  • Power Source: Electric
  • Max Spindle Speed (RPM): 200 rpm
  • Voltage: 110 V
  • Model: AS-250
  • MPN: XUNBS00840
27. 05
2022

AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM

Written by: admin - Posted in: as-250 - Tags: , , , , , , , , , ,
AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. All items are dispatched from our warehouse in Azusa, CA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “viphomesupply” and is located in this country: US. This item can be shipped to United States.

  • Rotate speed: 0-200 RPM
  • Torque: 150 lbs
  • Package size: 13\
  • Gross weight: 6.5 kg(14.3 lb)
  • Warranty: Lifetime
  • UPC: 0895800908447
  • EAN: 0895800908447
  • Brand: VEVOR
  • Function: Milling
  • Control: Manual
  • Machine Type: Milling Machine
  • Power Source: Electric
  • Max Spindle Speed (RPM): 200 RPM
  • Voltage: 110 V
  • Model: AS-250
  • MPN: ZCXUN00525
15. 05
2022

AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque

Written by: admin - Posted in: as-250 - Tags: , , , , , , ,
AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


For more information on our products. Please send message to us. AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM. What Customers Have To About Us. ” Delivered as promised and item is as described “. Just what i was looking for. Had a problem-was able to successfully resolve it. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). 110 V, 60 Hz. 33 cm (13 inch). 20 cm (7.9 inch). 18 cm (7 inch). 6.5 kg(14.3 lb). AS-250-150 X-Axis Power Feed for Milling Machine. Set of Necessary Accessories. X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification. We offer detailed product descriptions and images to give you a real advantage in finding the products you’re looking for. 25 years Industry Experience. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “super-hypress” and is located in this country: US. This item can be shipped to United States.

  • Brand: SUPER-HYPRESS
  • Model: AS-250-150
  • MPN: ZY8LX00361
  • Voltage: 110V
  • Rotate speed: 0-200 RPM
  • Torque: 150 lbs
  • Package size: 13\
  • Gross weight: 6.5 kg(14.3 lb)
  • Warranty: 5 Years
  • Function: Milling
  • Machine Type: Milling Machine
  • Power Source: Electric
  • Control: Manual
  • UPC: 980610788829
13. 05
2022

AS-250 Power Feed X-Axis 150Lbs Torque for Bridgeport Milling Machine Knee Mills

Written by: admin - Posted in: as-250 - Tags: , , , , , , , , , ,
AS-250 Power Feed X-Axis 150Lbs Torque for Bridgeport Milling Machine Knee Mills


AS-250 Power Feed X-Axis 150Lbs Torque for Bridgeport Milling Machine Knee Mills


AS-250 Power Feed X-Axis 150Lbs Torque for Bridgeport Milling Machine Knee Mills


AS-250 Power Feed X-Axis 150Lbs Torque for Bridgeport Milling Machine Knee Mills


AS-250 Power Feed X-Axis 150Lbs Torque for Bridgeport Milling Machine Knee Mills


AS-250 Power Feed X-Axis 150Lbs Torque for Bridgeport Milling Machine Knee Mills


AS-250 Power Feed X-Axis 150Lbs Torque for Bridgeport Milling Machine Knee Mills


AS-250 Power Feed X-Axis 150Lbs Torque for Bridgeport Milling Machine Knee Mills


AS-250 Power Feed X-Axis 150Lbs Torque for Bridgeport Milling Machine Knee Mills


AS-250 Power Feed X-Axis 150Lbs Torque for Bridgeport Milling Machine Knee Mills


AS-250 Power Feed X-Axis 150Lbs Torque for Bridgeport Milling Machine Knee Mills


AS-250 Power Feed X-Axis 150Lbs Torque for Bridgeport Milling Machine Knee Mills


For more information on our products. Please send message to us. AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM. What Customers Have To About Us. ” Delivered as promised and item is as described “. Just what i was looking for. Had a problem-was able to successfully resolve it. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). 110 V, 60 Hz. 33 cm (13 inch). 20 cm (7.9 inch). 18 cm (7 inch). 6.5 kg(14.3 lb). AS-250-150 X-Axis Power Feed for Milling Machine. Set of Necessary Accessories. X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. All items are dispatched from our warehouse in Azusa, CA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. 25 years Industry Experience. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ftpress” and is located in this country: US. This item can be shipped to United States.

  • Model: AS-250-150
  • Machine Type: Milling Machine
  • Power Source: Electric
  • MPN: ZY8LX00361
  • Rotate speed: 0-200 RPM
  • Torque: 150 lbs
  • Function: Milling
  • Package size: 13\
  • Gross weight: 6.5 kg(14.3 lb)
  • Warranty: lifetime
  • Brand: FTPRESS
  • Control: Manual
  • Voltage: 110V
  • UPC: 832419278820
27. 09
2021

VEVOR AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , ,
VEVOR AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


VEVOR AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


VEVOR AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


VEVOR AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


VEVOR AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


VEVOR AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


VEVOR AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


VEVOR AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


VEVOR AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


VEVOR AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


VEVOR AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


VEVOR AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque


X-AXIS POWER FEED – Voltage: 110V, 60Hz; Revolution Speed: 0-200 RPM. The power table feed is made of sturdy and durable aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. LONG SERVICE LIFE – The power feed for milling machine features smooth and strengthened polished that resists water, oil, and dust. That ensures its long service life in an awful working environment. HIGH EFFICIENCY & PRECISION: The x-axis power feed is equipped with spiral bevel gears and bearings to achieve rapidity and high efficiency and precision as well. QUIET & EASY OPERATION – The milling machine power feed features 9 levels of moving speed, set by the rotary knob on the side. Moreover, it doesn’t make noises when moving, good news for a workshop. WIDE APPLICATION – The knee mill power feed fits most vertical knee mills with a 5/8 shaft end, such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, etc. The compact power knee feed can work automatically at a constant speed or manually by pressing the speed control. And the circuit breaker protects the transmission gear and electronic components. The milling machine table power feed is made of rugged aluminum material. Its finish has been polished and resists corrosion and wear. That makes it work for a long time. The power feed for mill adopts spiral bevel gears to move freely and quietly on the mill. Considering that it is noisy in the garage, it would be helpful that the feed cut noises. The mill power feed is also equipped with precise bearings that ensure its smooth and stable movement. Less vibration and strain enhance the efficiency of the whole milling machine. The power feed for milling machine is easy to install and operate. Only a little maintenance is enough for its long-term regular running. The power table feed fits most vertical knee mills with a 5/8 shaft end, such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, etc. AS-250-150 X-Axis Power Feed Kit. Our AS-250-150 x-axis feed kit features a robust shell and precise components. It works efficiently and quietly on a milling machine with a 5/8 shaft end. Besides, it is designed with buttons and knobs for simple operation. It is a good choice for your milling machine. High Efficiency & Precision. Quiet & Easy Operation. Voltage: 110 V, 60 Hz. Rotate Speed: 0-200 rpm. Package size: 13″x7.9″x7/33x20x18 cm. Gross weight: 14.3 lb/6.5 kg. 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Accessory Set. Power Feed Milling Machine. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. The compact power knee feed can workautomatically at a constant speed or manually by pressing the speedcontrol. And the circuit breaker protects the transmission gear andelectronic components. The power feed for mill adopts spiral bevel gears tomove freely and quietly on the mill. Considering that it is noisy in thegarage, it would be helpful that the feed cut noises. The power feed for milling machine is easy toinstall and operate. Only a little maintenance is enough for itslong-term regular running. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours. The item “VEVOR AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque” is in sale since Thursday, August 10, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rumei-shopping” and is located in Perth Amboy, New Jersey. This item can be shipped to United States, all countries in Europe, Canada, Mexico, Australia.

  • Brand: VEVOR
  • MPN: 8LXQI0037
  • Model: AS-250
  • Power Source: Electric
  • Voltage: 110 V
  • Control: Manual
  • Function: Milling
  • Machine Type: Milling Machine
  • Max Spindle Speed (RPM): 200 rpm
  • RPM: 0~200
  • TORQUE: 150LBS
  • Gross weight: 6.5 kg(14.3 lb)
  • Rotate speed: 0-200 rpm
  • Package size: 33*20*18 cm (13*7.9*7 in)

Search this blog