Proxxon Dividing Head for TBM220 KT70 MF70. Dividing head for MICRO miller MF 70 and MICRO compound table KT 70. For machining circular work pieces, manufacturing off-set holes and milled out portions. Milling key surfaces, four-sided, six sided materials, etc. Absolute accurate division due to nonius at the base body. With reversed chuck jaws: Capacity inside 1.5 to 32mm, outside 12 to 65mm. Bore of 11mm (for processing longer spindles in a vertical position). With fastening bores for horizontal and vertical mounting and suitable slot nuts and fastening screws for mounting to the MICRO miller MF 70 a. Nd the MICRO compound table KT 70. Size 72 x 64 x 38mm. In wooden box with sliding lid. The item “Proxxon Dividing head chuck for KT70 MF70 TBM220 24264 / Direct from RDGTools” is in sale since Tuesday, September 15, 2015. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: 24264
• Brand: proxxon

BORING HEAD ON 3 MORSE TAPER METRIC. MICRO-ADJUSTMENT GIVES A FEED OF 0.02MM. ON DIAMETER PER DIVISION. COMPLETE WITH 9 PIECE 12MM TOOLS. THIS QUALITY ONLY AVAILABLE FROM RDGTOOLS. The item “RDGTOOLS 3MT SILVER BORING HEAD KIT MILLING LATHE METRIC + 9PC 12MM TOOLS” is in sale since Wednesday, November 13, 2013. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• Brand: RDGTools HBM Myford
• MPN: Does Not Apply

4 WAY TOOLPOST TO FIT A MYFORD LATHE. THIS 4 WAY TOOLPOST WILL FIT STRAIGHT ONTO A MYFORD LATHE. CAN TAKE UP TO 8mm TURNING / BORING TOOLS. COMES WITH 8 THREADED BOLTS. THE BOTTOM PLATE MEASURES 6.3MM THICK. PLEASE NOTE, THIS IS NOT THE INDEXING TYPE – IT HAS A FLAT BOTTOM. The item “RDGTOOLS 4 WAY TOOLPOST TO FIT A MYFORD LATHE” is in sale since Friday, March 30, 2012. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “rdg355″ and is located in HEBDEN BRIDGE WEST YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

ER32 COLLET SET 18PC / LATEST QUALITY. Colour of the box may change. THIS QUALITY AND PRICE ONLY FROM RDGTOOLS. 18PC COLLETS COVERING ALL SIZES 2-20MM. THESE COLLETS ALLOW HOLDING OF. STRAIGHT SHANK SLOT / END MILLS. DRILLS REAMERS, SPOT FACERS, ECT. INFACT ANYTHING ROUND BETWEEN 2-20MM. 18PC COLLET SET SET IS STORED AND DISPLAYED IN QUALITY. OR SEE OUR OTHER COLLET COMBINATIONS. The item “RDGTOOLS ER32 COLLET SET 18PC / LATEST QUALITY” is in sale since Friday, November 12, 2010. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

QUALITY MILLING ER25 COLLET SET 16PC. AND 2MT ER25 COLLET CHUCK & SPANNER. THIS QUALITY AND PRICE ONLY FROM RDGTOOLS. 15PC COLLETS COVERING ALL SIZES 1.5-16MM. THESE COLLETS ALLOW HOLDING OF. STRAIGHT SHANK SLOT / END MILLS. DRILLS REAMERS, SPOT FACERS, ETC. IN FACT ANYTHING ROUND BETWEEN 1.5-16MM. OUR GRADE WE FEEL OFFERS BOTH GOOD QUALITY AND VALUE. 15PC COLLET SET SET IS STORED AND DISPLAYED IN QUALITY. OR SEE OUR OTHER COLLET COMBINATIONS. The item “RDGTOOLS ER25 2MT COLLET CHUCK SET 16PC” is in sale since Tuesday, April 12, 2011. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

R8 ER32 COLLET SET 18PC / LATEST QUALITY. THIS QUALITY AND PRICE ONLY FROM RDGTOOLS. 18PC COLLETS COVERING ALL SIZES 2-20MM. THESE COLLETS ALLOW HOLDING OF. STRAIGHT SHANK SLOT / END MILLS. DRILLS REAMERS, SPOT FACERS, ETC. PLUS R8 ER32 COLLET CHUCK WITH SPANNER. IN FACT ANYTHING ROUND BETWEEN 2-20MM. 18PC COLLET SET SET IS STORED AND DISPLAYED IN QUALITY. OR SEE OUR OTHER COLLET COMBINATIONS. The item “RDGTOOLS 18PC R8 ER32 COLLET SET FOR BRIDGEPORT MILLER” is in sale since Tuesday, April 19, 2011. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

MYFORD COLLET CHUCK WITH ER32 COLLET SET. ER32 COLLET CHUCK WITH BUILT IN MYFORD THREAD. THIS IS A 2PC HEAD SYSTEM. THIS SYSTEM IS DESIGNED TO CREATE THE BEST ACCURACY AVAILABLE ON YOUR MACHINE! 1CLEAN ALL PARTS. 2 FIT THE BACKPLATE TO THE MACHINE. 3ROUGH TURN THE REGISTER. 4 SKIM FACE AND BLEND WITH THE DIAMETER. 5 FINISH THE REGISTER. 6 OFFER UP THE ADAPTOR AND SKIM MORE IF NEEDED. 7 CLEAN THE ADAPTOR AND SECURE WITHTHE 3 SCREWS BUT DO NOT TIGHTEN. 8USE A DTI ON THE TAPER TO CHECK THE ACCURACY. 9 IF REQUIRED TAP DOWN THE HIGH POINT AND RE CHECK. 10 TIGHTEN THE SCREWS. AND FULL 18PC ER32 COLLET SET RANGE 2-20MM AND IMPERIAL EQUIVALENT. THE COLLETS ARE SUPPLIED IN FITTED ALUMINIUM BOX, THE CHUCK COMES IN PLASTIC TUBE. THIS COLLET SET WILL HOLD THREADED AND STRAIGHT SHANK ENDMILLS / DRILL BITS ETC. The item “RDGTOOLS MYFORD ER32 COLLET CHUCK WITH 18PC ER 32 COLLETS 2MM TO 20MM SUPER 7″ is in sale since Thursday, November 18, 2010. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

NEW 6 / 150MM Rotary Table. WITH 125MM 3 JAW LATHE CHUCK. Only 65mm high (without chuck). Table Ratio 72:1. Base is ground with 2 securing slots. Table locking handle can be removed if needed. Table can be Horizontal or Vertical. Table has a 107mm centre high in the vertical position. 150mm from base to top of jaws in horizontal position. Comes with 3 T slots. 3 jaw self centering lathe chuck comes with internal and external jaws, chuck key and mounting bolts. Perfect for small milling machines which have only a small amount of table space. A TOP QUALITY TABLE WITH SMOOTH ROTATION. The item “RDGTOOLS NEW 150MM / 6 ROTARY TABLE GREEN WITH 3 JAW 125MM LATHE CHUCK” is in sale since Wednesday, April 27, 2016. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• Brand: RDGTools HBM Myford
• MPN: Does Not Apply

75MM SELF CENTERING MACHINE VICE. 75mm /3 Super Precision Self-Centering Machine Vice. Made from high tensile Cast iron. Jaws open max 79mm. Base dimensions 202mm x 144mm. Clamping points 175mm between centres. Jaws Hardened and ground. Removable swivel base graduated 0-360 degrees. Vice automatically Adjust the workpiece to its centre. The item “RDGTOOLS 75MM / 3 SELF CENTERING MACHINE VICE MILLING VISE ENGINEERING TOOLS” is in sale since Thursday, June 23, 2016. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: HBM RDGTOOLS MYFORD

HBM 18PC R8 COLLET SET METRIC. ON BRIDGEPORT MILLING MACHINES. ALL COLLETS HARDENED & GROUND. 2MM – 20MM IN 1MM INCREMENTS. STANDARD 7/16 UNF DRAWBAR THREAD. SEE OUR COMPLETE R8 BRIDGEPORT RANGE. The item “RDGTOOLS 19PC R8 COLLET SET 2-20MM FOR BRIDGEPORT METRIC COLLETS MILLING TOOLS” is in sale since Wednesday, July 29, 2015. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• Type: R8 COLLET
• MPN: Does Not Apply
• Brand: RDGTools HBM Myford