Bridgeport J Head 1HP Milling Machine. Fully disassembled, cleaned, and restored. New parts (all from H+W). Split nuts for both lead screws. “Top Half Rebuild kit, ” new belts and all new bearings in the pully housing. Top gear case packed with grease instead of oil. New spindle oil strainer. Felt wipers for all ways. Filters for one shot lube system. All new oil lines. New power downfeed trip lever. It has the oldest geared Bridgeport powerfeed, but no motor to drive it. It has a Bijur one shot lube system, that I also took apart, cle. Aned, and filled with fresh oil. The power downfeed works great, very smooth. I have videos of everything in operation that I can send. Great old machine, missing a little paint but good working condition. Gibs are shimmed, and when the gibs are fully tight, wear in the ways limits the table and saddle travel. It has a travel of 19″ longitudinal, and 8″ cross travel. One might be able to adjust the gibs, or remove the shims. The machine still holds great tolerances within its reduced travel, in my limited experience. Feel free to reach out with any questions, or to set up a time to look at the machine in person. My business has a forklift and I can help load. The item “Bridgeport J Head Milling Machine, 1HP, 9-42 Table, Fully Cleaned and Restored” is in sale since Sunday, August 15, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “nicholas.meehan” and is located in Brooklyn, New York. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Spindle Horsepower: 1 hp
• Function: Drilling
• Control: Manual
• Machine Type: Milling Machine
• Voltage: 220 V
• Model: Bridgeport J

THIS IS A CIRCA 1950 BENCHMASTER VERTICAL MILLING MACHINE VERY LITTLE WARE COMPLETELY CLEANED GLASS BEADED AND PAINTED. AND NEW SPINDLE BEARINGS AND SEALS. WITH A 1 HP 3PHASE MOTOR WITH A 110 VOLT VFD FOR VARIABLE SPEED (PLUGS IN A REGULAR 110V) WITH LEGS CAST IRON.. USED VFD AND NEW MOTOR. The item “BENCHMASTER MILLING MACHINE CIRA 1950 RESTORED VARIABLE SPEED” is in sale since Sunday, February 18, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “lovegug” and is located in Dothan, Alabama. This item can be shipped to United States.

• Brand: BENCH MASTER
• Country/Region of Manufacture: United States

THIS IS A CIRCA 1950 BENCHMASTER VERTICAL MILLING MACHINE VERY LITTLE WARE COMPLETELY CLEANED GLASS BEADED AND PAINTED. AND NEW SPINDLE BEARINGS AND SEALS. WITH A 1 HP 3PHASE MOTOR WITH A 110 VOLT VFD FOR VARIABLE SPEED (PLUGS IN A REGULAR 110V) WITH LEGS CAST IRON.. USED VFD AND NEW MOTOR. The item “BENCHMASTER MILLING MACHINE CIRA 1950 RESTORED VARIABLE SPEED” is in sale since Wednesday, January 17, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “lovegug” and is located in Dothan, Alabama. This item can be shipped to United States.

• Brand: BENCH MASTER
• Country/Region of Manufacture: United States

Restored Atlas MFC Horizontal Milling Machine. This milling machine was bought by my brother a number of years ago to add to his machining capability in a clock restoration business. It was disassembled, cleaned, repaired and repainted. It was then set aside until it could be reassembled. Unfortunately due to an illness it was never finished by my brother. The milling machine has been reassembled by me as seen in the photos and looks to be complete. It will need a final tightening once transported to it’s new shop. The motor runs smoothly. There is a swivel vise that I think goes with the machine which is included along with a instruction and parts booklet. There is also a box of cutters (9). I will partially disassemble it to make it easier to move when it sells. Note, this is local pick-up only. If you need additional photos let me know. The item “Atlas MFC horizontal Milling Machine-Change-O-Matic, Beautifully Restored” is in sale since Tuesday, December 13, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “hillsclockrepair” and is located in Holliston, Massachusetts. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas
• MPN: Does Not Apply
• Country/Region of Manufacture: United States
• Model: MFC

Not just repainted, this mill has been properly restored by a machinery expert. Starting with an excellent condition original mill, this unit was fully disassembled and every part was cleaned, inspected, painted, and properly lubricated upon re-assembly. Two-part industrial quality paint in original atlas grey was used for this restoration… This paint will hold up to many years of use. Every electrical component of this mill was completely re-wired… It is ready to plug into standard 120v outlet and start cutting metal. Everything on this mill functions perfectly as it should… Table operation, feed selection, back gear and motor belts all work perfectly. The photos speak for themselves… You will not find a nicer atlas mfc mill than this offering. Complete with the rare original overarm support, full compliment of spacers for the included 7/8 arbor, the back gear engagement tool, and copies of atlas parts list and owners manual for the mfc mill. Note this offering also includes a new oem table nut replacement set (brass parts shown on mill table)… These are not needed at the current time, but included as spares for down the road. The atlas mfc mill is very popular for home model engineers… Don’t miss your opportunity to obtain this atlas mfc now in perfect restored condition, ready to use in your shop. Complete details of the mfc can be found on the website… Just search for atlas in the milling machines section of the machine tool. The two black lamps illuminating the mill as well as the table the mill is mounted on are not included. Total weight in excess of 200 pounds.The item “Atlas MFC Milling Machine Completely restored and ready for use” is in sale since Sunday, February 22, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “clifforddward” and is located in Cary, North Carolina. This item can’t be shipped, the buyer must pick up the item.