A machine used for making jewelry. Used equipment from SCAD. Good condition, keep as a backup or use for parts. Comes with three binder manuals and spare parts etc. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rebelgfx” and is located in this country: US. This item can be shipped to United States.

• Model: Roland Jewela JWX-10
• Brand: Roland
• Function: Milling
• Control: CNC
• Machine Type: Milling Machine

Complete with manual and software. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mwestlak” and is located in this country: US. This item can be shipped to United States.

• Brand: Roland
• Function: Milling
• Control: CNC
• Machine Type: Milling Machine
• Model: roland mdx-50

Roland JWX-10 Desktop CNC Milling Machine Engraver Wax Mold Maker. Measurements: Item weighs over 150 pounds- my scale would weigh over that. Condition: Used in working order. See ALL photos for Quality and Condition. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jjc130fe” and is located in this country: US. This item can be shipped to United States.

• Brand: Roland
• Control: CNC
• Machine Type: Milling Machine
• Model: Roland JWX-10 Desktop CNC Milling

Roland JWX-10 Desktop CNC Milling Machine Engraver Wax Mold Maker. Measurements: Item weighs over 150 pounds- my scale would weigh over that. Condition: Used in working order. See ALL photos for Quality and Condition. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jjc130fe” and is located in this country: US. This item can be shipped to United States.

• Brand: Roland
• Control: CNC
• Machine Type: Milling Machine
• Model: Roland JWX-10 Desktop CNC Milling

This Roland Modela Pro MDX-650A 3D Milling Machine w/ Enclosure, ZAT-650 is in fair cosmetic condition with signs of use. This unit has scuffs and scratches present, as well as staining and some signs of corrosion. There are a number of additional tool pieces and fittings included: Picture 1. Various manuals, info guides, and setup guides are available directly from Roland. There was a ZAT-650 controller sitting inside the unit not connected, I’m not sure if this unit has the correct spindle for it but it is included for completeness. I was able to power on this unit as shown, but the display only showed “Emergency Stop EXT1 is not connected” and I was unable to move passed this message. Approximate unpacked dimensions: 47″ x 41″ x 42. The cost of this pallet will be paid. No software, power cords, or other accessories are included unless stated above. The unpacked weight of this item is 482 pounds on the pallet shown. Is there a Dock or Forklift available? The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatory agencies. Outback Equipment Company Gilroy, California. Listing and template services provided by inkFrog. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “outback6″ and is located in this country: US. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Brand: Roland
• MPN: MDX-650A
• Model: Modela Pro

This is for a used ROLAND MODELA MDX-15 DESKTOP CNC 3D PLOTTER MILLING MACHINE 100-120 VOLT. This powers not in working condition has a bent guide rod and stripped gear. This looks complete it is missing the Plexiglas cover/gaurd and maybe missing other parts I’m not sure eitherway see pictures. Lease look carefully what you see is what you will get. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “*jeremiah*” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Paraguay, Reunion, Uruguay.

• Brand: Roland
• Function: Milling
• Control: CNC
• Machine Type: Milling Machine
• Model: 100-120

Roland Modela MDX-40 3D Engraver CNC Mill Desktop Benchtop With 4th Axis Nice Compact Machine. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amiron_machinery” and is located in this country: US. This item can be shipped to United States.

• Model: Roland Modela MDX-40 3D
• Function: Milling
• Brand: Roland
• Control: CNC

Roland MDX-15 Desktop CNC For Parts. Unit was removed from working environment but has not been tested for power as we do not have rest of unit. Does show signs of use including scuffs, marks, and dings. Please check out our other listings. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “bpizznit5″ and is located in this country: US. This item can be shipped to United States.

• Brand: Roland
• Function: Drilling, Milling
• Control: CNC
• Machine Type: Mini Milling Machine
• Max Spindle Speed (RPM): 4500-15000 rpm
• Power Source: Electric
• Voltage: 110 V
• Model: Roland MDX-15 Desktop CNC Machine
• MPN: MdX-15

Roland Modela MDX-40 3D Engraver CNC Mill Desktop Benchtop With 4th Axis. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amiron_machinery” and is located in this country: US. This item can be shipped to United States.

• Model: Roland Modela MDX-40 3D
• Function: Milling
• Brand: Roland
• Control: CNC

Here is a barely used model SRM20 CNC modeler by Roland. Actual run-time is unknown but likely under 80 hours. Condition shows low hours. Unit is solid with slight frame damage as pictured that will not affect operation. Acrylic door has had top edge repaired with a strap and has a small crack at bottom. Ideal machine for the hobbyist, craftsman or fabrication/prototype shop! Printed manual and tools as pictured are included; more information and many downloads available at manufacturers website. Specifications are included below. Modeling Wax, Chemical Wood, Foam, Acrylic, Poly acetate, ABS, PC Board. = 8.00in (203.2mm). = 6.00in (152.4mm). = 2.38in (60.5mm). X-axis Workpiece Table Size. = 9.14in (232.2mm). Y-axis Workpiece Table Size. = 6.17in (156.6mm). Maximum Distance From Collet Tip to Table. = 5.15in (130.75mm). = 4.4lb (2kg). X-axis, Y-, axis and Z-Axis Drive System. = 0.24 70.87in/min (6 1800mm/min). = 0.000039 in/step (RML-1), 0.000039 inches/step (NC code) 0.01 mm/step (RML-1), 0.001mm/step (NC code). = 0.0000393 in/step (0.000998594 mm/step). = DC motor Type 380. = Adjustable 3,000 7,000 rpm. = RML-1, NC code. = DC24V, 2.5A. Dedicated AC Adapter Power Requirements. = AC 100-240V ±10%, 50/60Hz. = During operation: 65 dB (A) or less (when not cutting), during standby: 45 dB (A) or less. = 17.76in (451.0mm). = 16.80in (426.6mm). = 16.78in (426.2mm). = 43.2lb (19.6kg). = Temperature of 41 to 104 °F (5 to 40°C), 35 to 80% relative humidity (no condensation). Windows 7/8/8.1 (32-bit/64-bit edition). Core 2 Duo or more Core i5 or more recommended. 1GB (2GB or more recommended). Video Card and Monitor =. A resolution of 1,280×1,024 or more recommended. Free hard-disk space required as a working space. = 100 megabytes or more recommended. As a small milling machine, the SRM-20 offers compact size and powerful functionality at an affordable price. Production of realistic parts and prototypes is made simple and convenient with a device that fits into any office, home, or classroom environment. For users looking for advanced milling capabilities without the need for expert operating skills, the SRM-20 is the easiest and most precise CNC mill in its class. A wide range of materials, including modeling wax, chemical wood, foam, acrylic, poly acetate, ABS and PC board can be precision milled using the SRM-20 small milling machine, allowing you to create realistic 3D prototypes that are virtually identical to production parts. Engineered for optimum efficiency and productivity, the SRM-20 is a next-generation desktop mill that boasts a micro-step motor drive system for clean and precise contours and a phenomenal feed rate thats two times faster than previous generations. Multi-axis milling is as easy as X, Y and Z. The SRM-20 was designed with a number of technological advancements that include a touch-button VPanel controller to regulate feed rate, spindle speed and milling on a complete X, Y, Z axes, and a new independent collet system that allows for faster setting of the Z-axis base point and quick tool changes. Produce More Prototypes with More Materials. The SRM-20 portable milling machine can mill a broad range of materials, including modeling wax, chemical wood, foam, acrylic, poly acetate, ABS and PC board. The following items are just some of the prototypes and applications made possible. Wax molds for casting. Relief plaques and graphics. Game and model parts. Milling Made Easy with a User-Friendly VPanel. The SRM-20s VPanel controller provides a simple interface for adjusting tool position and moving the cursor to set the milling starting point. The VPanel also allows easy control of feed rate and spindle speed with pause and resume operation, plus tracking of X, Y, Z axis milling with a numeric readout in millimeters or inches. Software Included for Out-of-the-Box Productivity. Available for download from Roland DG OnSupport, the following software offers user-friendly operation for all aspects of CNC milling on the SRM-20. A user-friendly CAM software with advanced editing capabilities that lets users explore new milling capabilities as their skills progress. Supports popular CAD file formats like STL, DXF, Rhino 3D Model and IGES. Easy-to-use CAM software that processes STL files produced by popular CAD programs. Features include uniform 3D scaling, selection of milling direction, automatic tool path generation, and control of cutting depths and speeds from a predefined library or user-defined setting. Use drawing tools to sketch out ideas before milling shapes, holes, textures, and patterns. Then simply load your cutting material into the mill, and the SRM-20 does the rest, recreating your design in precise detail. A powerful software tool that eliminates milling errors, simulates finished shapes and estimates production time. Software to directly control surfacing, drilling holes, cutting pockets and other finishing processes on the SRM-20, all without accessing CAD or CAM software. Convert any standard TrueType or Outline font into a Stroke Font or single line font for engraving. Independent Collet System for Efficient Milling. Its no longer necessary to change spindles every time theres a different end mill shank diameter. Now you can replace the collet chuck in order to match the shank diameter for fast setting of the Z-axis base point and for quick tool changes. The SRM-20 has a fully enclosed cabinet that reduces dust and noise and features a side window for easy progress viewing. It also features an intelligent safety interlock that automatically pauses the machine when the cover is opened, permitting milling to resume upon closing the cover and selecting continue. The SRM-20 includes the very latest CNC milling features such as airtight sealing technology to prevent waste material from getting inside the spindle and Y-axis, making it resistant to the effects of milling debris and adding durability for long-term operation. The item “Roland Monofab 3-axis Desktop Benchtop Compact CNC Mill Machine Machining Center” is in sale since Thursday, August 26, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “chipkickin” and is located in Franklin, Wisconsin. This item can be shipped to United States.

• Model: SRM-20
• Machine Type: Machining Center
• Power Source: Electric
• MPN: MDX40A
• Brand: Roland
• Control: CNC
• Voltage: 110 V