All-Metal Drilling Milling Machine Kit 60W High Power DIY Tool 12VDC / 5A / 60W. The machine tool uses a more powerful motor, and the motor box and the head box are connected structures. The main parts of the machine tool are made of metal materials, six-shaft positioning processing, with functions of drilling, milling, and indexing processing. Can be used in conjunction with the index plate to drill circular workpieces in equal parts. There are three groups of small holes distributed equally on the indexing plate, which are 36, 40, and 48 small holes, which can be selected according to actual needs. Suitable for processing wood, plastic, plexiglass, soft metal gold, silver, copper, aluminum, etc. Item Type: Drilling Milling Machine. Motor Speed: 12000rpm (optional 20,000 rpm). Input Voltage / Current / Power: 12VDC / 5A / 60W. Transformer: DC12V, 5A, 3C certification. Y-shaft Slider Stroke: 32mm, X, Z-shaft Slider Stroke: 145mm. 1 x Drilling Milling Machine. 1 x Base Plate. 1 x Power Cable. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “100-240V 60W High Power All-Metal DIY Drilling Milling Machine XYZ Shaft” is in sale since Saturday, December 28, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “worldproduct365″ and is located in Shenzhen. This item can be shipped worldwide.

• Brand: Unbranded
• Accuracy: 0.07mm
• Motor Speed: 12000rpm
• Type: Drilling Milling Machine
• Transformer: DC12V, 5A, 3C certification
• Model: TZ10002MS
• Input Voltage / Current / Power: 12VDC / 5A / 60W
• MPN: Does Not Apply
• Country/Region of Manufacture: China
• Y-shaft Slider Stroke: 32mm
• X&Z-shaft Slider Stroke: 145mm

100-240V All-Metal Drill Milling Machine High Power 60W DIY Tool XYZ Shaft NCZ. The machine tool uses a more powerful motor, and the motor box and the head box are connected structures. The main parts of the machine tool are made of metal materials, six-shaft positioning processing, with functions of drilling, milling, and indexing processing 3. Can be used in conjunction with the index plate to drill circular workpieces in equal parts 4. There are three groups of small holes distributed equally on the indexing plate, which are 36, 40, and 48 small holes, which can be selected according to actual needs. Suitable for processing wood, plastic, plexiglass, soft metal gold, silver, copper, aluminum, etc. Item Type: Drilling Milling Machine. Motor Speed: 12000rpm (optional 20,000 rpm) Input Voltage / Current / Power: 12VDC / 5A / 60W Transformer: DC12V, 5A, 3C certification Y-shaft Slider Stroke: 32mm, X, Z-shaft Slider Stroke: 145mm Accuracy: 0.07mm. 1 x Drilling Milling Machine. 1 x Base Plate. 1 x Power Cable. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “100-240V All-Metal Drill Milling Machine High Power 60W DIY Tool XYZ Shaft NCZ” is in sale since Saturday, February 6, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “naicmzi” and is located in Shenzhen. This item can be shipped worldwide.

• Accuracy: 0.07mm
• Brand: Unbranded
• Country/Region of Manufacture: China
• Input Voltage / Current / Power: 12VDC / 5A / 60W
• Model: TZ10002MS
• Motor Speed: 12000rpm
• MPN: Does Not Apply
• Transformer: DC12V
• Type: Drilling Milling Machine
• X&Z-shaft Slider Stroke: 145mm
• Y-shaft Slider Stroke: 32mm

100-240V All-Metal Drilling Milling Machine High Power 60W DIY Tool XYZ Shaft. The machine tool uses a more powerful motor, and the motor box and the head box are connected structures. The main parts of the machine tool are made of metal materials, six-shaft positioning processing, with functions of drilling, milling, and indexing processing 3. Can be used in conjunction with the index plate to drill circular workpieces in equal parts 4. There are three groups of small holes distributed equally on the indexing plate, which are 36, 40, and 48 small holes, which can be selected according to actual needs. Suitable for processing wood, plastic, plexiglass, soft metal gold, silver, copper, aluminum, etc. Item Type: Drilling Milling Machine. Motor Speed: 12000rpm (optional 20,000 rpm) Input Voltage / Current / Power: 12VDC / 5A / 60W Transformer: DC12V, 5A, 3C certification Y-shaft Slider Stroke: 32mm, X, Z-shaft Slider Stroke: 145mm Accuracy: 0.07mm. 1 x Drilling Milling Machine. 1 x Base Plate. 1 x Power Cable. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “100-240V All-Metal Drilling Milling Machine High Power 60W DIY Tool XYZ Shaft” is in sale since Saturday, December 28, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “accessories_mall” and is located in Shenzhen. This item can be shipped worldwide.

• Accuracy: 0.07mm
• Brand: Unbranded
• Country/Region of Manufacture: China
• Input Voltage / Current / Power: 12VDC / 5A / 60W
• Model: TZ10002MS
• Motor Speed: 12000rpm
• MPN: Does Not Apply
• Transformer: DC12V, 5A, 3C certification
• Type: Drilling Milling Machine
• X&Z-shaft Slider Stroke: 145mm
• Y-shaft Slider Stroke: 32mm

Sign up to Newsletters. Brand New AL-310S X-Axis Power Feed Kit For Milling Machine. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AL-310S X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). To stop jog operating, you must first turn FEED KNOB to 0(OFF) position. Then move JOG SWITCH to FEED position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Brand new power feed. X traverse (left-right travel). Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Rotate speed: 0-200 RPM. Max torque: 450 in-lb. Max feed rate: 650mm/min. Max return speed: 850mm/min. Dimension: 8 x 4.5 x 13 inches. Package size: 11.8 x 8.7 x 13.8 inches. Gross weight: 16.5 lbs. 1 x Power Feed For Milling Machine. 8 x Adjustable Pad. 2 x Tiavel Stop Assembly. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Caifornia Warehouse: 18501 Arenth Ave, City of Indus-try, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak X traverse 5/8 shaft” is in sale since Wednesday, October 18, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “technology-zoom” and is located in Ontario, California. This item can be shipped to United States, Canada, Mexico, Germany.

• Brand: Vevor Wälz-, Kugel-
• MPN: UGFSA00970
• Bundle Listing: Yes
• Model: AL-310S
• Country/Region of Manufacture: CHINA
• Voltage: 110V, 50/60Hz
• Rotate speed: 0-200 RPM
• Max torque: 450 in-lb
• Max feed rate: 650mm/min
• Max return speed: 850mm/min
• Dimension: 8 x 4.5 x 13 inches
• Gross weight: 16.5 lbs

VARIABLE SPEED 2 HP BRIDGEPORT MILLING MACHINE ROTOR ASSEMBLY AND MOTOR SHAFT. MANUFACTURED BY OEM SUPPLIERS. THIS HAS A NEW ARMATURE SHAFT. DON’T FORGET TO LOOK FOR THE PULLEY ASSEMBLY, BELT AND/OR REPAIR KIT FOR YOUR MACHINE. We guarantee the items are exactly as said in description. Appreciates your business very much. The free listing tool. The item “BRIDGEPORT MILL PART, MILLING MACHINE ROTOR ASSEMBLY & MOTOR SHAFT 2 HP M44484″ is in sale since Friday, November 15, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mataco1″ and is located in Broadview Heights, Ohio. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.

• Brand: BRIDGEPORT
• MPN: 44484

8mm head THK Tungsten Carbide Rotary Point Burr 12 pieces SET 6mm shaft Burr. Assorted 12 pieces of THK tungsten carbide burr. All of them in (6mm) shank, (8mm) head and 55 to 65mm total length. Produced by excellent quality material. Come with PVC case. The shapes and model number included (from left side first, from top to bottom). Cylindrical w/ end cut (B8). Round head Cylindrical (C8). Ball nosed tree (F8). 60 degree Taper (J8). 90 degree Taper (K8). Suitable for all your Metalworking. (or worldwide) is FREE. 14 days as longest. Should you have any queries. Thank you for your looking. The item “8mm head THK Tungsten Carbide Rotary Point Burr 12 pieces SET 6mm shaft tools” is in sale since Monday, March 18, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “wirebrush**” and is located in Hong Kong. This item can be shipped worldwide.

• Brand: THK Tungsten Tools

Heavy duty dividing head. Very very tight with little use. Came from high school metal shop. No production or commercial use; just occasional school use. Very heavy, weighs 160 pounds which means very smooth operation with no chatter. This is a high quality heavy duty dividing head, they don’t make them like this anymore. Will build full wooden crate for $100.00 or will build pallet for $45.00.The item “Cincinnati 11 Dividing Head Indexing spline shaft milling machine gears” is in sale since Sunday, April 26, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jetjims” and is located in White Lake, Michigan. This item can be shipped to United States.

• Model: 11″
• Make: Cincinnati
• Type: Dividing Head
• Country/Region of Manufacture: United States
• Brand: Cincinnati

Ttc vise for holding round work & shaft – model : vfrs jaw width: 4″ jaw opening: 2-1/2″. 4″ vise for round work 1/2″ to 2-1/2 – ttc. Holds short pieces 1/2″ to 2-1/2″ in diameter.

Used on milling machines and drill presses. Hardened “v” block made of tool steel.

Semi steel body and ground ends. Contains adjustable sliding rod enabling workpieces to be set in same position repeatedly.

Clamping bolts and (2) adjustable sliding blocks included. 55 to 60 in rockwell c scale. Hardened “v”block made of tool steel.The item “TTC Vise For Holding Round Work & Shaft Jaw Width 4 Jaw Opening 2-1/2″ is in sale since Wednesday, February 26, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “traverstoolco” and is located in Flushing, New York.