L & W 6-1/2″ SWING DIVIDING HEAD + FOOT STOCK, PLATE 1-1/2″-8 NOSE THREAD B & S #9 INTERNAL TAPER. VERY NICE DIVIDING HEAD WITH VERY LITTLE USE. The item “L & W 6-1/2 SWING DIVIDING HEAD + FOOT STOCK, PLATE 1-1/2-8 NOSE THREAD” is in sale since Monday, October 16, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “mmtoolmfg” and is located in Highland, New York. This item can be shipped to United States.

• Brand: L & W
• MPN: Does Not Apply

Has three hole plates and tail stock. The item “L & W 6-1/2 SWING DIVIDING HEAD + Tail STOCK, 3 PLATES 1-1/2-8 THREAD” is in sale since Tuesday, April 10, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “cabin-still” and is located in Salisbury, North Carolina. This item can be shipped to United States.

• Brand: L & W
• MPN: Does Not Apply

Sign up to Newsletters. Brand New AL-310S X-Axis Power Feed Kit For Milling Machine. Our Brand New AL-310S X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). To stop jog operating, you must first turn FEED KNOB to 0(OFF) position. Then move JOG SWITCH to FEED position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Brand new power feed. X traverse (left-right travel). Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Rotate speed: 0-200 RPM. Max torque: 450 in-lb. Max feed rate: 650mm/min. Max return speed: 850mm/min. Dimension: 8 x 4.5 x 13 inches. Package size: 11.8 x 8.7 x 13.8 inches. Gross weight: 16.5 lbs. 1 x Power Feed For Milling Machine. 8 x Adjustable Pad. 2 x Tiavel Stop Assembly. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “ALSGS Power Feed for Vertical Milling Machine 110V X Y Axis AL-310SX In US STOCK” is in sale since Monday, June 25, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “digitalzoneproduct” and is located in Ontario, California. This item can be shipped to United States, Canada, Mexico, Germany.

• Brand: VEVOR
• MPN: XCXXZ00348
• Bundle Listing: Yes
• Model: AL-310S
• Country/Region of Manufacture: CHINA
• Voltage: 110V, 50/60Hz
• Rotate speed: 0-200 RPM
• Max torque: 450 in-lb
• Max feed rate: 650mm/min
• Max return speed: 850mm/min
• Dimension: 8 x 4.5 x 13 inches
• Gross weight: 16.5 lbs

Here is a Bridgeport Dividing Head Indexer Tail Stock. The center height is adjustable from 7-7/8″ to 8-9/16″. It has 5/8″ keyways in the 5″ x 6-3/8 base. The paint is chipping but everything moves and turns smoothly. Check the pictures for condition as the items we sell are used and may have marks or blemishes. Check out the other items in our store at LnL Deals. The item “Bridgeport Dividing Head Indexer Tail Stock Machinist Tool” is in sale since Tuesday, November 20, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “lbkos14mvy” and is located in Elizabethtown, Pennsylvania. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Bridgeport

Here is a nice. Dividing / Indexing Head with a tail stock and 2 dividing plates. The head accepts #4 morse taper chuck or center. The thread OD for mounting a jaw chuck is 2.675 x 5 TPI. The dividing plates are 7-1/2 dia. The height of the centers are 5-1/8. The center on the tail stock has some damage (see last pic). The head weighs 85 lbs and the tail stock weighs 24lbs. The base of the head is 6-1/4″ x 8″. It stands 8-1/2 tall from the base to to the top of the body. This is also listed for sale locally so the listing could end at any time. Check the pictures for condition as the items we sell are used and may have marks or blemishes. Check out the other items in our store at LnL Deals. The item “Dividing Indexing Head & Tail Stock, Milling, Machinist Tool, Index, Gear” is in sale since Tuesday, December 18, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “lbkos14mvy” and is located in Elizabethtown, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Non-Domestic Product: No

Sign up to Newsletters. 100W CO2 LASER ENGRAVERING MACHINE 900X600MM USB CE AND FDA CERTIFICATE. New Laser Engraving and Cutting Machine. The machine is a kind of Laser Engraving Machine System equipped with. It is used to engrave on wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass and etc. It is most suitable and the preferred choice of equipments in industries such as advertisement, gifts, shoes, toys and etc. It supports multiple graphic formats, such as. HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI. This machine is equipped with. And other advance software. It must connect with computer with USB cable when you change the settings of machine for the design files, you can transfer the file with USB memory stick to the machine, or can download it to the machine directly with USB cable from computer. Even on the same Job, you can do setting with different colour in the software and also can making holes. And it can the legs separate from the main body of the machine. The machine has doors which can be opened to accommodate larger materials. All laser engraving machines can not carve and cut metal. Advertisement, arts and crafts, leather, toys, garments, model, building upholster, computerized embroidery and clipping, packaging and paper industry. FDA, CE Certification, ISO9001 Quality Certification. Smooth and Precise Engraving and Cutting. Output from RDdraw directly, also supports CoreDraw and Auto CAD. Optimization of mechanical and electrical design. More friendly control panel with Color Screen. English, French, German, Italian, Spanish and more languages updating. Separation of cutting up to 256 Colors. One key to install , more convenient. Use virtual array list and additional off-cut graph to realize the off-cut function. Machines with feeding devices can realize the cyclical model of working-feeding-working. USB Interface, U-Flash Disk Supported, Machine will read files from memory stick, you can work even without a PC. Air Assist , Remove heat and combustible gases from the cutting surface and make the engraving and cutting projects a breeze. Adopt advanced DSP digital control system, international standard laser power supply, integrated framework style. Working size: 35.4″x23.6″(900mm x 600mm) with double side open door. Up and down work plate: 15.7 (400mm). Laser tube type: Co2 Glass sealed laser tube. Driver type: Micro Stepping Motor. Location precision: 0.01mm. PC Interface: USB2.0 and USB Disk. Image form: HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI. Machine Dimension(L/W/H): 150010801100 (mm). Package Dimension(L/W/H): 159015601310 (mm). Package: Standard Wooden case for export. Laser Engraving software Package(English Version). 3 Reflect optics (installed in the machine). 1 Focus optics (installed in the machine). CO2 LASER ENGRAVING MACHINE CUTTER ENGRAVER CRAFTS PROFESSIONAL EASY OPERATION. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “100W CO2 USB Laser Engraving Cutting Machine Wood Cutter 900X600mm USA stock” is in sale since Tuesday, January 9, 2018. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving”. The seller is “equipmentwholesaler1″ and is located in Ontario, California. This item can be shipped to United States, all countries in Europe, Canada.

• Brand: VEVOR
• MPN: CXXZN002
• Model: 900X600
• Country/Region of Manufacture: China
• Control system: DSP
• Working size: 35.4inchesx23.6inches(900mm x 600mm)
• Laser tube type: Co2 Glass sealed laser tube
• Laser power: 100W
• Driver type: Micro Stepping Motor
• Max speed: 1000mm/s
• Resolution: 1000 DPI
• Location precision: 0.01mm
• PC Interface: USB2.0 and USB Disk
• Software: Auto Laser
• Image form: HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI
• UPC: 895801464775

One of machine tool accessories for dividing workpieces into equal partitions. By using dividing scale ring, vernier, locating pin, index plate and change gear, workpieces placed can be divided into equal partitions according to your demand. It can be used for direct and indirect dividing. Able to complete gear, face and flute processing without need of accessories, however its whole construction is the same with the universal type. Can complete 2, 3, 4, 6, 8, 12, 24 division indexing. Are attached along with the dividing head for indirect dividing in any division indexing 2-50, 51-380 except prime numbers and certain other numbers. The front of dividing head dimension. The tail of the dividing head dimension. Uantity of dividing plate’s hole Helical gear reduction ratio. 100% brand new, of good quality. Divide any angle by the direct, indirect or differential methods. Head stock swivels to all angles. Direct mounted index plate has 24 divisions. Headstock Taper: 7 B&S. Weight: 23 kg (50.7 lbs). Package Dimensions: 410235205mm (1698inch). 1 X Dividing Head Set. 3 X Dividing Plates. 1 X 125mm 3 Jaw Chuck. The item “Bs-0 Semi-Universal Quick Dividing Indexing Head With Tail Stock For Cnc Mill” is in sale since Tuesday, April 10, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “goodenergytools” and is located in Cranbury, New Jersey. This item can be shipped worldwide.

• Brand: DC HOUSE
• MPN: L09010201030-1
• Model: Complete Dividing 5″ Head Set
• Manufacturer Part Number: Rener-09
• Type: CNC, Horizontal
• Herstellernummer: L09010201030-1

JET Equipment & Tools Vertical Milling Machine. From a discontinued shop program. It has not been used in a few years, but appears to still be in very good condition. Contact details are below. The sale of this mill will help to fund future educational initiatives, such as our industrial robotics program. We appreciate your support. Again, this is local pick-up only. You will to come and pick it up, and have a method for getting it into your truck. The item “JET Vertical Milling Machine Model No JVM-836-1 – Stock No 690036″ is in sale since Wednesday, July 18, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “clps-tech” and is located in Center Line, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Brand: JET
• Model: JVM-836-1
• Country/Region of Manufacture: United States
• Bundle Listing: No
• MPN: JVM-836-1

JET Equipment & Tools Vertical Milling Machine. From a discontinued shop program. It has not been used in a few years, but appears to still be in very good condition. Contact details are below. The sale of this mill will help to fund future educational initiatives, such as our industrial robotics program. We appreciate your support. Unit #1 can be viewed here. The item “(Unit #2) JET Vertical Milling Machine Model No JVM-836-1 – Stock No 690036″ is in sale since Tuesday, June 12, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “clps-tech” and is located in Center Line, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Brand: JET
• Model: JVM-836-1
• Country/Region of Manufacture: United States
• Bundle Listing: No

JET Equipment & Tools Vertical Milling Machine. From a discontinued shop program. It has not been used in a few years, but appears to still be in very good condition. Contact details are below. The sale of this mill will help to fund future educational initiatives, such as our industrial robotics program. We appreciate your support. The item “JET Vertical Milling Machine Model No JVM-836-1 – Stock No 690036″ is in sale since Thursday, June 7, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “clps-tech” and is located in Center Line, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Brand: JET
• Model: JVM-836-1
• Country/Region of Manufacture: United States
• Bundle Listing: No
• MPN: JVM-836-1