X-AXIS POWER FEED – Voltage: 110V, 60Hz; Revolution Speed: 0-200 RPM. The power table feed is made of sturdy and durable aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. LONG SERVICE LIFE – The power feed for milling machine features smooth and strengthened polished that resists water, oil, and dust. That ensures its long service life in an awful working environment. HIGH EFFICIENCY & PRECISION: The x-axis power feed is equipped with spiral bevel gears and bearings to achieve rapidity and high efficiency and precision as well. QUIET & EASY OPERATION – The milling machine power feed features 9 levels of moving speed, set by the rotary knob on the side. Moreover, it doesn’t make noises when moving, good news for a workshop. WIDE APPLICATION – The knee mill power feed fits most vertical knee mills with a 5/8 shaft end, such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, etc. The compact power knee feed can work automatically at a constant speed or manually by pressing the speed control. And the circuit breaker protects the transmission gear and electronic components. The milling machine table power feed is made of rugged aluminum material. Its finish has been polished and resists corrosion and wear. That makes it work for a long time. The power feed for mill adopts spiral bevel gears to move freely and quietly on the mill. Considering that it is noisy in the garage, it would be helpful that the feed cut noises. The mill power feed is also equipped with precise bearings that ensure its smooth and stable movement. Less vibration and strain enhance the efficiency of the whole milling machine. The power feed for milling machine is easy to install and operate. Only a little maintenance is enough for its long-term regular running. The power table feed fits most vertical knee mills with a 5/8 shaft end, such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, etc. AS-250-150 X-Axis Power Feed Kit. Our AS-250-150 x-axis feed kit features a robust shell and precise components. It works efficiently and quietly on a milling machine with a 5/8 shaft end. Besides, it is designed with buttons and knobs for simple operation. It is a good choice for your milling machine. High Efficiency & Precision. Quiet & Easy Operation. Voltage: 110 V, 60 Hz. Rotate Speed: 0-200 rpm. Package size: 13″x7.9″x7/33x20x18 cm. Gross weight: 14.3 lb/6.5 kg. 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Accessory Set. Power Feed Milling Machine. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. The compact power knee feed can workautomatically at a constant speed or manually by pressing the speedcontrol. And the circuit breaker protects the transmission gear andelectronic components. The power feed for mill adopts spiral bevel gears tomove freely and quietly on the mill. Considering that it is noisy in thegarage, it would be helpful that the feed cut noises. The power feed for milling machine is easy toinstall and operate. Only a little maintenance is enough for itslong-term regular running. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours. The item “VEVOR AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 150LBS Torque” is in sale since Thursday, August 10, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rumei-shopping” and is located in Perth Amboy, New Jersey. This item can be shipped to United States, all countries in Europe, Canada, Mexico, Australia.

• Brand: VEVOR
• MPN: 8LXQI0037
• Model: AS-250
• Power Source: Electric
• Voltage: 110 V
• Control: Manual
• Function: Milling
• Machine Type: Milling Machine
• Max Spindle Speed (RPM): 200 rpm
• RPM: 0~200
• TORQUE: 150LBS
• Gross weight: 6.5 kg(14.3 lb)
• Rotate speed: 0-200 rpm
• Package size: 33*20*18 cm (13*7.9*7 in)

Maxi Torque Air Power Drawbar for Bridgeport mill (R8) TR-100 with DB-100. Fullerton Office 2320 E Valencia Dr Fullerton, CA 92831. Piscataway Office 244 N. Randolphville Road Piscataway, NJ 08854. 2320 E Valencia Dr Fullerton, CA 92831. Note: Weight restrictions may apply in some cases. Orders under 150 lbs. Orders above 150 lbs. We guarantee the items are exactly as said in description. Thank you for viewing. Supra Machine Tool appreciates your business very much. Supra Machine Tool E-bay Store. For a wide selection of parts for milling machine, machining center, surface grinder, and engine lathes. The item “Maxi Torque Air Power Drawbar for Bridgeport mill (R8) TR-100 with DB-100″ is in sale since Monday, March 11, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “supramachinetool” and is located in Fullerton, California. This item can be shipped worldwide.

• Brand: Maxi Torque-Rite
• MPN: TR-100 + DB-100
• UPC: Does not apply

X-AXIS POWER FEED- Power Feed X-Axis, Voltage: 220V, 60Hz, Rotate Speed: 200 Rpm, Max Torque: 450 in-lb, Max Feed Rate: 650mm/min, Max Return Speed: 850mm/min, Dimension: 8 x 4.5 x 13 inches. QUIET & RAPID OPERATION- With speed adjust knob, speed can be adjusted according to operator’s requirement, ranging from 0-9. Jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. DURABLE & LONG LASTING- Safe design helps to protect transmission gear and electronic components; two gears of this power table feed will not mesh and wear at the same spot, maximizing durability and longevity. ERGONOMIC DESIGN- Power feed is equipped with safety feature to protect transmission gear and electronic components as to meet the requirements of ergonomics. EASY SETUP- Small volume and easy installation, noiseless direction changes. Fit almost any vertical knee type milling machine with the 5/8 shaft end. Milling Machine Power Feed. Power Feed X-Axis, Voltage: 220V, 60Hz, Rotate Speed: 0-200 RPM, Max Torque: 450 in-lb, Max Feed Rate: 650mm/min, Max Return Speed: 850mm/min, Dimension: 8 x 4.5 x 13 inches. Rotate Speed: 0-200 RPM, Max Feed Rate: 650mm/min. Milling machine power feed features noiseless direction changes and direction control knob for easy and rapid operation. The two gears of this power table feed will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Power table feed won’t vibrate or strain in low speed. Power feed is equipped with safety feature to protect transmission gear and electronic components as to meet the requirements of ergonomics. Dimension: 8 x 4.5 x 13 inches. This small volume and easy installation X-axis power feed is designed to automate the feeding process on Bridgeport type milling machines. Suitable models including vertical turret milling machine, drilling and milling machine and other machinery. 220V Power Feed Milling Machine With Rotate Speed 200. Our brand new Mill Power Feed featuring Max. Rotate speed 200Rpm, power torque 450 in-lb and Max. Feed rate: 650mm/min, similar knee type milling machines, including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… Quiet & Rapid Operation. Durable & Long Lasting. Rotate Speed: 200 RPM. Max Torque: 450 in-lb. Max Feed Rate: 650mm/min. Max Return Speed: 850mm/min. Gross Weight: 16.5 lbs. 1 x Power Feed For Milling Machine. 8 x Adjustable Pad. 2 x Travel Stop Assembly. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. Power Feed Milling Machine. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “VEVOR 220V Power Feed Milling Machine Al-310S X-Axis Torque 450 In-lb 200PRM” is in sale since Tuesday, March 24, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dairuirui122_3″ and is located in Perth Amboy, New Jersey. This item can be shipped to United States, Canada, Mexico.

• Brand: VEVOR
• MPN: UGFSA0081231563961342
• Model: 310X
• Country/Region of Manufacture: China
• Power Source: Electric
• Voltage: 220V, 50Hz
• Control: Manual
• Function: Milling
• Custom Bundle: No
• Modified Item: No
• Machine Type: Milling Machine
• Max Spindle Speed (RPM): 0-200 RPM
• Rotate Speed: 200 RPM
• Max Torque: 450 in-lb
• Max Feed Rate: 650mm/min
• Max Return Speed: 850mm/min
• Dimension: 8 x 4.5 x 13 inches
• Gross Weight: 16.5 lbs

X-AXIS POWER FEED – Voltage: 110V, 60Hz; Revolution Speed: 0-200 RPM. The power table feed is made of sturdy and durable aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. LONG SERVICE LIFE – The power feed for milling machine features smooth and strengthened polished that resists water, oil, and dust. That ensures its long service life in an awful working environment. HIGH EFFICIENCY & PRECISION: The x-axis power feed is equipped with spiral bevel gears and bearings to achieve rapidity and high efficiency and precision as well. QUIET & EASY OPERATION – The milling machine power feed features 9 levels of moving speed, set by the rotary knob on the side. Moreover, it doesn’t make noises when moving, good news for a workshop. WIDE APPLICATION – The knee mill power feed fits most vertical knee mills with a 5/8 shaft end, such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, etc. The compact power knee feed can work automatically at a constant speed or manually by pressing the speed control. And the circuit breaker protects the transmission gear and electronic components. The milling machine table power feed is made of rugged aluminum material. Its finish has been polished and resists corrosion and wear. That makes it work for a long time. The power feed for mill adopts spiral bevel gears to move freely and quietly on the mill. Considering that it is noisy in the garage, it would be helpful that the feed cut noises. The mill power feed is also equipped with precise bearings that ensure its smooth and stable movement. Less vibration and strain enhance the efficiency of the whole milling machine. The power feed for milling machine is easy to install and operate. Only a little maintenance is enough for its long-term regular running. The power table feed fits most vertical knee mills with a 5/8 shaft end, such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, etc. AL-310S X-Axis Power Feed Kit. Our AL-310S x-axis feed kit features a robust shell and precise components. It works efficiently and quietly on a milling machine with a 5/8 shaft end. Besides, it is designed with buttons and knobs for simple operation. It is a good choice for your milling machine. High Efficiency & Precision. Quiet & Easy Operation. Rotate Speed: 0-200 RPM. Max Torque: 450 in-lb. Max Feed Rate: 650 mm/min. Max Return Speed: 850 mm/min. Dimension: 8″x4.5″x13. Package Size: 11.8″x8.7″x13.8. Gross Weight: 16.5 lbs. 1 x Power Feed for Milling Machine. 8 x Adjustable Pad. 2 x Travel Stop Assembly. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. Power Feed Milling Machine. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “AL-310S 450lbs Torque X-AXIS Power Feed Milling Machine 110V 0-200RPM 5/8 Shaft” is in sale since Wednesday, August 14, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “believehappysale9″ and is located in Perth Amboy, New Jersey. This item can be shipped to United States, Canada, Mexico.

• Brand: VEVOR
• MPN: REWLK006
• Model: AL-310S
• Power Source: Electric
• Voltage: 110V, 50/60Hz
• Control: Manual
• Function: Milling
• Machine Type: Milling Machine
• Rotate speed: 0-200 RPM
• Max torque: 450 in-lb
• Max feed rate: 650mm/min
• Max return speed: 850mm/min
• Dimension: 8 x 4.5 x 13 inches
• Gross weight: 16.5 lbs

Better price, Top Quality, expert Service support. Live demo of multiple products. Owned and operated company. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. AS-250-150 X-Axis Power Feed for Milling Machine X 1. Set of Necessary Accessories X 1. Product Manual X 1. All items are dispatched from our warehouse in CANJAL. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. We never want our customers to wait for parts, we have plenty of parts available for every product. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. The item “Power Feed X-Axis 150 Lbs Torque For Bridgeport Type Milling Machines 0-200 RPM” is in sale since Thursday, March 11, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “best-homepro” and is located in Westbury, New York. This item can be shipped to United States.

• Brand: BEST-HOMEPRO
• Model: AS-250-150
• MPN: ZY8LX00361
• Voltage: 110V
• Rotate speed: 0-200 RPM
• Torque: 150 lbs
• Package size: 13″x8″x7″
• Gross weight: 6.5 kg(14.3 lb)
• Warranty: 5 Years
• Function: Milling
• Machine Type: Milling Machine
• Power Source: Electric
• Control: Manual

Made of aluminum material. Rotate Speed: 0-200 RPM, Max Torque: 135in-lb. Dimension: 7 x 4 x 11 inc. QUIET & RAPID OPERATION. With speed adjust knob, speed can be adjusted according to operator’s requirement, ranging from 0-9. Jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. DURABLE & LONG LASTING. Safe design helps to protect transmission gear and electronic components; accessories of this power table feed will not mesh and wear at the same spot, maximizing durability and longevity. Power feed is equipped with safety feature to protect transmission gear and electronic components as to meet the requirements of ergonomics. Small volume and easy installation, noiseless direction changes. Fit almost any horizontal knee type milling machine and other small machinery. Milling Machine Power Feed. Power Feed Y-Axis, Voltage: 110V, Rotate Speed: 0-200 RPM, Max Torque: 135 in-lb, Dimension: 7 x 4 x 11 inc. Rotate Speed: 0-200 RPM. Milling machine power feed features noiseless direction changes and direction control knob for easy and rapid operation. Equipped with several necessary accessories, this not only increases durability and longevity but even reduces noise over time. Power table feed won’t vibrate or strain in low speed. This small volume and easy installation Y-axis power feed is designed to automate the feeding process on Bridgeport type milling machines. Suitable for horizontal installation models including turret milling machine, drilling and milling machine and other small machinery. Power Feed Milling Machine w/ Rotate Speed 200Rpm. If you want to get the most out of your milling drilling machine you really need a power feed. This power feed comes with everything required to start milling with exact contro. Our brand new Mill Power Feed featuring Max. Rotate speed 200Rpm, power torque 135 in-lb, is for bridgeport and similar knee type milling machines. Quiet & Rapid Operation. Durable & Long Lasting. Rotate Speed: 0-200 Rpm. Max Torque: 135 in-lb. 1 x Power Feed. 1 x A Set of Related Accessories. Power Feed Milling Machine. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “Power Feed Y-Axis 135Lbs 200RPM Torque for Bridgeport Type Milling Machine 110V” is in sale since Thursday, December 12, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “love-happyshopping” and is located in Perth Amboy, New Jersey. This item can be shipped to United States, Canada.

• Brand: VEVOR
• MPN: LKJLX00101574760395
• Power Source: Electric
• Voltage: 110 V
• Control: Manual
• Function: Milling
• Machine Type: Milling Machine
• Rotate Speed: 0-200 Rpm
• Max Torque: 135 in-lb
• Type: AL-310SY

The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that¡¯s why our customers keep coming back. The item “Power Feed X-Axis 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM” is in sale since Tuesday, December 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “vipshopmarket” and is located in Westbury, New York. This item can be shipped to United States.

• Brand: VIPSHOPMARKET
• Model: AS-250-150
• MPN: ZY8LX00361
• Voltage: 110V
• Rotate speed: 0-200 RPM
• Torque: 150 lbs
• Package size: 13″x8″x7″
• Gross weight: 6.5 kg(14.3 lb)
• Warranty: 5 Years
• Function: Milling
• Machine Type: Milling Machine
• Power Source: Electric
• Control: Manual

Sign up to Newsletters. Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage: 110 V, 60 Hz. Rotate speed: 0-200 rpm. Length: 33 cm (13 inch). Width: 20 cm (7.9 inch). Height: 18 cm (7 inch). Gross weight: 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. International Buyers Please Note. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within 12-24hours. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Westminster Hwy, Richmond, BC, Canada. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “Power Feed X-Axis 150 Lbs Torque for Bridgeport Type Milling Machine 0-200 RPM” is in sale since Wednesday, December 11, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “hotitemsale” and is located in Richmond. This item can be shipped worldwide.

• Brand: VEVOR
• MPN: 74AZY00331523585124
• Model: AS-250-150
• Power Source: Electric
• Voltage: 110 V, 60 Hz
• Control: See description
• Function: Milling
• Machine Type: Milling Machine
• Type: X-axis
• Torque: 150lbs
• Rotate speed: 0-200 rpm

The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. We have Four warehouses located in CA, NY, NJ & GA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. The item “X-Axis 150 LBS Torque Power Feed For Bridgeport Vertical Milling Machine 200 RPM” is in sale since Wednesday, September 23, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “homesupplies01″ and is located in Westbury, New York. This item can be shipped to United States.

• Voltage: 110V
• Rotate speed: 0-200 RPM
• Torque: 150 lbs
• Package size: 13″x8″x7″
• Gross weight: 6.5 kg(14.3 lb)
• Warranty: 5 Years
• Function: Milling
• Machine Type: Milling Machine
• Power Source: Electric
• Control: Manual
• Brand: VEVOR
• Model: AS-250-150
• MPN: ZCXZG0085

The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. We have Four warehouses located in CA, NY, NJ & GA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. The item “X-Axis Power Feed for Vertical Milling Machine 150 Lbs Torque Knee Mills Fits” is in sale since Thursday, July 16, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “homesupplies01″ and is located in Westbury, New York. This item can be shipped to United States.

• Rotate speed: 0-200 RPM
• Torque: 150 lbs
• Package size: 13″x8″x7″
• Gross weight: 6.5 kg(14.3 lb)
• Warranty: 5 Years
• Machine Type: Milling Machine
• Power Source: Electric
• Function: Milling
• Control: Manual
• Voltage: 110V
• Brand: VEVOR
• Model: AS-250-150
• MPN: ZCXZG0085