If you do not have an account No Worries! Model # : FZ-08S Serial #: 475-20 Year: 1996 Hours: 6393H 9M (As seen on operator display). Machine Is In Very Good Condition and Ready to Run. Drilling Capacity: 16 mm. Tool Diameter Maximum: 40 mm if adj. Max Tool Length: 160 mm. Spindle Drive: 3.7 kW. Speed Range: 20-10,500 min-1. Front Spindle Bearing Diameter: 40 mm. Tool Clamping: 2500 N. Clearance of Spindle to Cover: 200-450 mm. Clearance Spindle Nose to Table Surface: 170-420mm. Travel X-axis: 300 mm. Travel Y-axis: 250 mm. Feed Force X/Y Axis: 2000 N. Travel Z-axis: 250 mm. Feed Force Z-axis: 3000 N. Rapid Traverse X/Y Axis: 40 m/min. Rapid Traverse Z Axis: 60 m/min. Fixed Table Clamping Surface: 620 x 270 mm. Grid Location Pattern: M16 x 15H7 x 50mm. Max Table Load: 150 kg. Coolant Equipment, Tank Capacity: 100L (Pictured Separately). CNC Control: Fanuc 21. Electrical Requirements: Wired For 480V 3P 60hz 30A w/ Installed Multi-Tap Transformer. Equipped With: Workpiece Table, AC Servo Motors, Steel Covers on All Axes, 3 Axes Continuous Path Control, Machine Enclosure, Mini-Operating Panel, Coolant Equipment w/Chip Container, Installation Elements, Rigid Tapping, Royal Filtermist Collector. 5,000.00 lbs. Next Day Automation, nor it’s employees will be held responsible for accidental or intentional use or misuse occurring with this item. Next Day Automation 9472 Hemlock Lane N. Maple Grove, MN 55369 USA. Office Hours: Monday – Friday 7:30am – 4:00pm CT. Open Monday through Friday, 7:30am-4:00pm. Powered by SixBit’s eCommerce Solution. The item “Chiron FZ08S Vertical Mill Machine Center VMC X-Y-Z withFanuc CNC FilterMist” is in sale since Tuesday, May 23, 2017. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “next.day.automation” and is located in Osseo, Minnesota. This item can be shipped to United States.

• Make: Chiron Milling Machining Control Center
• Model: FZ-08S
• MPN: FZ 08 S
• Type: CNC, Vertical
• Model Year: 1996
• Serial Number: 475-20

Clark 49″x9″ Variable-Speed Milling Machine Mill NEW DRO X-Axis-Power-Feed X-Y-Z. Comes in non-original packaging. It has scuffs and scratches from normal use. When power was applied, this item runs great. It was not tested under a load. We ran the spindle at various speeds in forward and reverse. The quill was lowered manually as well as automatically. The head and assembly can easily be moved in varying degrees to accommodate your specific applications. All three axis’s can be moved manually, though the X-axis is the only one that can be moved automatically. All move smoothly with no problems. The original DRO was bad so we replaced it with a New one that is a step up from the old one. No further testing was performed. NOTE: It is missing two handles. One for the Z-axis to move the table assembly up and down, and the one left of the quill scale. Both locations seen in the pictures. No manuals, cords/cables, or additional items are included if not listed or shown. (1) Clark 49″x9″ Variable-Speed Mill. (1) NEW SINO DRO 2-Axis Digital Readout Display Console. (1) M-DRO SDS6-2V Display Console Technical Information. Table: 49″ x 9″. Automatic & Manual Feed. LOW & High Lever. Tilt 45 Degrees (up/down). Rotate 90 Degrees (left/right). Entire Head Assembly: Rotate 90 Degrees (left/right). ALIGN AL-300S Power Feed. Auto-Feed For X-Axis Only. X: Auto-Feed & Manual. V: 220 / 440. A: 8.5 / 4.25. 2-Axis Digital Readout Display Console. For questions regarding this item, please reference the SKU to help us better serve you. Give us a call. DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions. DougDeals Terms of Use. DougDeals directly accepts US and Canadian issued credit cards only. Please fill out this form. This item is guaranteed to be as described. See full terms here. DougDeals reserves the right to refuse service to anyone that does not comply with the terms listed and linked here. The sole and exclusive venue for any lawsuit arising out of or relating to this agreement shall be the Travis County Civil Courts of Travis County, Texas. The item “Clark 49×9 Variable-Speed Milling Machine Mill NEW DRO X-Axis-Power-Feed X-Y-Z” is in sale since Monday, November 21, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “athomemarket” and is located in Leander, Texas. This item can be shipped worldwide.

• Brand: Clark
• MPN: Unknown